mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-21 02:03:18 +00:00
1017 lines
52 KiB
C
Executable file
1017 lines
52 KiB
C
Executable file
|
|
/******************************************************************************
|
|
* \attention
|
|
*
|
|
* <h2><center>© COPYRIGHT 2020 STMicroelectronics</center></h2>
|
|
*
|
|
* Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
|
|
* You may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* www.st.com/myliberty
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
|
|
* AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************/
|
|
|
|
|
|
/*
|
|
* PROJECT: ST25R391x firmware
|
|
* Revision:
|
|
* LANGUAGE: ISO C99
|
|
*/
|
|
|
|
/*! \file rfal_isoDep.h
|
|
*
|
|
* \author Gustavo Patricio
|
|
*
|
|
* \brief Implementation of ISO-DEP protocol
|
|
*
|
|
* This implementation was based on the following specs:
|
|
* - ISO/IEC 14443-4 2nd Edition 2008-07-15
|
|
* - NFC Forum Digital Protocol 1.1 2014-01-14
|
|
*
|
|
*
|
|
* \addtogroup RFAL
|
|
* @{
|
|
*
|
|
* \addtogroup RFAL-AL
|
|
* \brief RFAL Abstraction Layer
|
|
* @{
|
|
*
|
|
* \addtogroup ISO-DEP
|
|
* \brief RFAL ISO-DEP Module
|
|
* @{
|
|
*
|
|
*/
|
|
|
|
#ifndef RFAL_ISODEP_H_
|
|
#define RFAL_ISODEP_H_
|
|
/*
|
|
******************************************************************************
|
|
* INCLUDES
|
|
******************************************************************************
|
|
*/
|
|
#include "platform.h"
|
|
#include "rfal_nfcb.h"
|
|
|
|
|
|
/*
|
|
******************************************************************************
|
|
* ENABLE SWITCH
|
|
******************************************************************************
|
|
*/
|
|
|
|
#ifndef RFAL_FEATURE_ISO_DEP
|
|
#define RFAL_FEATURE_ISO_DEP false /*!< ISO-DEP module configuration missing. Disabled by default */
|
|
#endif
|
|
|
|
/* If module is disabled remove the need for the user to set lengths */
|
|
#if !RFAL_FEATURE_ISO_DEP
|
|
#undef RFAL_FEATURE_ISO_DEP_IBLOCK_MAX_LEN
|
|
#undef RFAL_FEATURE_ISO_DEP_APDU_MAX_LEN
|
|
|
|
#define RFAL_FEATURE_ISO_DEP_IBLOCK_MAX_LEN (1U) /*!< ISO-DEP I-Block max length, set to "none" */
|
|
#define RFAL_FEATURE_ISO_DEP_APDU_MAX_LEN (1U) /*!< ISO-DEP APDU max length, set to "none" */
|
|
#endif /* !RFAL_FEATURE_NFC_DEP */
|
|
|
|
/*
|
|
******************************************************************************
|
|
* DEFINES
|
|
******************************************************************************
|
|
*/
|
|
|
|
#define RFAL_ISODEP_PROLOGUE_SIZE (3U) /*!< Length of Prologue Field for I-Block Format */
|
|
|
|
#define RFAL_ISODEP_PCB_LEN (1U) /*!< PCB length */
|
|
#define RFAL_ISODEP_DID_LEN (1U) /*!< DID length */
|
|
#define RFAL_ISODEP_NAD_LEN (1U) /*!< NAD length */
|
|
#define RFAL_ISODEP_NO_DID (0x00U) /*!< DID value indicating the ISO-DEP layer not to use DID */
|
|
#define RFAL_ISODEP_NO_NAD (0xFFU) /*!< NAD value indicating the ISO-DEP layer not to use NAD */
|
|
|
|
#define RFAL_ISODEP_FWI_MASK (0xF0U) /*!< Mask bits of FWI */
|
|
#define RFAL_ISODEP_FWI_SHIFT (4U) /*!< Shift val of FWI */
|
|
#define RFAL_ISODEP_FWI_DEFAULT (4U) /*!< Default value for FWI Digital 1.0 11.6.2.17 */
|
|
#define RFAL_ISODEP_ADV_FEATURE (0x0FU) /*!< Indicate 256 Bytes FSD and Advanc Proto Feature support:NAD & DID */
|
|
|
|
#define RFAL_ISODEP_DID_MAX (14U) /*!< Maximum DID value */
|
|
|
|
#define RFAL_ISODEP_BRI_MASK (0x07U) /*!< Mask bits for Poll to Listen Send bitrate */
|
|
#define RFAL_ISODEP_BSI_MASK (0x70U) /*!< Mask bits for Listen to Poll Send bitrate */
|
|
#define RFAL_ISODEP_SAME_BITRATE_MASK (0x80U) /*!< Mask bit indicate only same bit rate D for both direction support */
|
|
#define RFAL_ISODEP_BITRATE_RFU_MASK (0x08U) /*!< Mask bit for RFU */
|
|
|
|
/*! Maximum Frame Waiting Time = ((256 * 16/fc) * 2^FWImax) = ((256*16/fc)*2^14) = (67108864)/fc = 2^26 (1/fc) */
|
|
#define RFAL_ISODEP_MAX_FWT ((uint32_t)1U<<26)
|
|
|
|
|
|
|
|
#define RFAL_ISODEP_FSDI_DEFAULT RFAL_ISODEP_FSXI_256 /*!< Default Frame Size Integer in Poll mode */
|
|
#define RFAL_ISODEP_FSX_KEEP (0xFFU) /*!< Flag to keep FSX from activation */
|
|
#define RFAL_ISODEP_DEFAULT_FSCI RFAL_ISODEP_FSXI_256 /*!< FSCI default value to be used in Listen Mode */
|
|
#define RFAL_ISODEP_DEFAULT_FSC RFAL_ISODEP_FSX_256 /*!< FSC default value (aligned RFAL_ISODEP_DEFAULT_FSCI) */
|
|
#define RFAL_ISODEP_DEFAULT_SFGI (0U) /*!< SFGI Default value to be used in Listen Mode */
|
|
#define RFAL_ISODEP_DEFAULT_FWI (8U) /*!< Default Listener FWI (Max) Digital 2.0 B7 & B3 */
|
|
|
|
#define RFAL_ISODEP_APDU_MAX_LEN RFAL_ISODEP_FSX_1024 /*!< Max APDU length */
|
|
|
|
#define RFAL_ISODEP_ATTRIB_RES_MBLI_NO_INFO (0x00U) /*!< MBLI indicating no information on its internal input buffer size */
|
|
#define RFAL_ISODEP_ATTRIB_REQ_PARAM1_DEFAULT (0x00U) /*!< Default values of Param 1 of ATTRIB_REQ Digital 1.0 12.6.1.3-5 */
|
|
#define RFAL_ISODEP_ATTRIB_HLINFO_LEN (32U) /*!< Maximum Size of Higher Layer Information */
|
|
#define RFAL_ISODEP_ATS_HB_MAX_LEN (15U) /*!< Maximum length of Historical Bytes Digital 1.1 13.6.2.23 */
|
|
#define RFAL_ISODEP_ATTRIB_REQ_MIN_LEN (9U) /*!< Minimum Length of ATTRIB_REQ command */
|
|
#define RFAL_ISODEP_ATTRIB_RES_MIN_LEN (1U) /*!< Minimum Length of ATTRIB_RES response */
|
|
|
|
#define RFAL_ISODEP_SPARAM_VALUES_MAX_LEN (16U) /*!< Maximum Length of the value field on S(PARAMETERS) */
|
|
#define RFAL_ISODEP_SPARAM_TAG_BLOCKINFO (0xA0U) /*!< S(PARAMETERS) tag Block information */
|
|
#define RFAL_ISODEP_SPARAM_TAG_BRREQ (0xA1U) /*!< S(PARAMETERS) tag Bit rates Request */
|
|
#define RFAL_ISODEP_SPARAM_TAG_BRIND (0xA2U) /*!< S(PARAMETERS) tag Bit rates Indication */
|
|
#define RFAL_ISODEP_SPARAM_TAG_BRACT (0xA3U) /*!< S(PARAMETERS) tag Bit rates Activation */
|
|
#define RFAL_ISODEP_SPARAM_TAG_BRACK (0xA4U) /*!< S(PARAMETERS) tag Bit rates Acknowledgement */
|
|
|
|
#define RFAL_ISODEP_SPARAM_TAG_SUP_PCD2PICC (0x80U) /*!< S(PARAMETERS) tag Supported bit rates from PCD to PICC */
|
|
#define RFAL_ISODEP_SPARAM_TAG_SUP_PICC2PCD (0x81U) /*!< S(PARAMETERS) tag Supported bit rates from PICC to PCD */
|
|
#define RFAL_ISODEP_SPARAM_TAG_SUP_FRAME (0x82U) /*!< S(PARAMETERS) tag Supported framing options PICC to PCD */
|
|
#define RFAL_ISODEP_SPARAM_TAG_SEL_PCD2PICC (0x83U) /*!< S(PARAMETERS) tag Selected bit rate from PCD to PICC */
|
|
#define RFAL_ISODEP_SPARAM_TAG_SEL_PICC2PCD (0x84U) /*!< S(PARAMETERS) tag Selected bit rate from PICC to PCD */
|
|
#define RFAL_ISODEP_SPARAM_TAG_SEL_FRAME (0x85U) /*!< S(PARAMETERS) tag Selected framing options PICC to PCD */
|
|
|
|
#define RFAL_ISODEP_SPARAM_TAG_LEN (1) /*!< S(PARAMETERS) Tag Length */
|
|
#define RFAL_ISODEP_SPARAM_TAG_BRREQ_LEN (0U) /*!< S(PARAMETERS) tag Bit rates Request Length */
|
|
#define RFAL_ISODEP_SPARAM_TAG_PICC2PCD_LEN (2U) /*!< S(PARAMETERS) bit rates from PCD to PICC Length */
|
|
#define RFAL_ISODEP_SPARAM_TAG_PCD2PICC_LEN (2U) /*!< S(PARAMETERS) bit rates from PICC to PCD Length */
|
|
#define RFAL_ISODEP_SPARAM_TAG_BRACK_LEN (0U) /*!< S(PARAMETERS) tag Bit rates Acknowledgement Length */
|
|
|
|
#define RFAL_ISODEP_ATS_TA_DPL_212 (0x01U) /*!< ATS TA DSI 212 kbps support bit mask */
|
|
#define RFAL_ISODEP_ATS_TA_DPL_424 (0x02U) /*!< ATS TA DSI 424 kbps support bit mask */
|
|
#define RFAL_ISODEP_ATS_TA_DPL_848 (0x04U) /*!< ATS TA DSI 848 kbps support bit mask */
|
|
#define RFAL_ISODEP_ATS_TA_DLP_212 (0x10U) /*!< ATS TA DSI 212 kbps support bit mask */
|
|
#define RFAL_ISODEP_ATS_TA_DLP_424 (0x20U) /*!< ATS TA DRI 424 kbps support bit mask */
|
|
#define RFAL_ISODEP_ATS_TA_DLP_848 (0x40U) /*!< ATS TA DRI 848 kbps support bit mask */
|
|
#define RFAL_ISODEP_ATS_TA_SAME_D (0x80U) /*!< ATS TA same bit both directions bit mask */
|
|
#define RFAL_ISODEP_ATS_TB_FWI_MASK (0xF0U) /*!< Mask bits for FWI (Frame Waiting Integer) in TB byte */
|
|
#define RFAL_ISODEP_ATS_TB_SFGI_MASK (0x0FU) /*!< Mask bits for SFGI (Start-Up Frame Guard Integer) in TB byte */
|
|
|
|
#define RFAL_ISODEP_ATS_T0_TA_PRESENCE_MASK (0x10U) /*!< Mask bit for TA presence */
|
|
#define RFAL_ISODEP_ATS_T0_TB_PRESENCE_MASK (0x20U) /*!< Mask bit for TB presence */
|
|
#define RFAL_ISODEP_ATS_T0_TC_PRESENCE_MASK (0x40U) /*!< Mask bit for TC presence */
|
|
#define RFAL_ISODEP_ATS_T0_FSCI_MASK (0x0FU) /*!< Mask bit for FSCI presence */
|
|
#define RFAL_ISODEP_ATS_T0_OFFSET (0x01U) /*!< Offset of T0 in ATS Response */
|
|
|
|
|
|
#define RFAL_ISODEP_MAX_I_RETRYS (2U) /*!< Number of retries for a I-Block Digital 2.0 16.2.5.4 */
|
|
#define RFAL_ISODEP_MAX_R_RETRYS (3U) /*!< Number of retries for a R-Block Digital 2.0 B9 - nRETRY ACK/NAK: [2,5] */
|
|
#define RFAL_ISODEP_MAX_WTX_NACK_RETRYS (3U) /*!< Number of S(WTX) replied with NACK Digital 2.0 B9 - nRETRY WTX[2,5] */
|
|
#define RFAL_ISODEP_MAX_WTX_RETRYS (20U) /*!< Number of overall S(WTX) retries Digital 2.0 16.2.5.2 */
|
|
#define RFAL_ISODEP_MAX_WTX_RETRYS_ULTD (255U) /*!< Use unlimited number of overall S(WTX) */
|
|
#define RFAL_ISODEP_MAX_DSL_RETRYS (0U) /*!< Number of retries for a S(DESELECT) Digital 2.0 B9 - nRETRY DESELECT: [0,5] */
|
|
#define RFAL_ISODEP_RATS_RETRIES (1U) /*!< RATS retries upon fail Digital 2.0 B7 - nRETRY RATS [0,1] */
|
|
|
|
|
|
/*! Frame Size for Proximity Card Integer definitions */
|
|
typedef enum
|
|
{
|
|
RFAL_ISODEP_FSXI_16 = 0, /*!< Frame Size for Proximity Card Integer with 16 bytes */
|
|
RFAL_ISODEP_FSXI_24 = 1, /*!< Frame Size for Proximity Card Integer with 24 bytes */
|
|
RFAL_ISODEP_FSXI_32 = 2, /*!< Frame Size for Proximity Card Integer with 32 bytes */
|
|
RFAL_ISODEP_FSXI_40 = 3, /*!< Frame Size for Proximity Card Integer with 40 bytes */
|
|
RFAL_ISODEP_FSXI_48 = 4, /*!< Frame Size for Proximity Card Integer with 48 bytes */
|
|
RFAL_ISODEP_FSXI_64 = 5, /*!< Frame Size for Proximity Card Integer with 64 bytes */
|
|
RFAL_ISODEP_FSXI_96 = 6, /*!< Frame Size for Proximity Card Integer with 96 bytes */
|
|
RFAL_ISODEP_FSXI_128 = 7, /*!< Frame Size for Proximity Card Integer with 128 bytes */
|
|
RFAL_ISODEP_FSXI_256 = 8, /*!< Frame Size for Proximity Card Integer with 256 bytes */
|
|
RFAL_ISODEP_FSXI_512 = 9, /*!< Frame Size for Proximity Card Integer with 512 bytes ISO14443-3 Amd2 2012 */
|
|
RFAL_ISODEP_FSXI_1024 = 10, /*!< Frame Size for Proximity Card Integer with 1024 bytes ISO14443-3 Amd2 2012 */
|
|
RFAL_ISODEP_FSXI_2048 = 11, /*!< Frame Size for Proximity Card Integer with 2048 bytes ISO14443-3 Amd2 2012 */
|
|
RFAL_ISODEP_FSXI_4096 = 12 /*!< Frame Size for Proximity Card Integer with 4096 bytes ISO14443-3 Amd2 2012 */
|
|
} rfalIsoDepFSxI;
|
|
|
|
/*! Frame Size for Proximity Card definitions */
|
|
typedef enum
|
|
{
|
|
RFAL_ISODEP_FSX_16 = 16, /*!< Frame Size for Proximity Card with 16 bytes */
|
|
RFAL_ISODEP_FSX_24 = 24, /*!< Frame Size for Proximity Card with 24 bytes */
|
|
RFAL_ISODEP_FSX_32 = 32, /*!< Frame Size for Proximity Card with 32 bytes */
|
|
RFAL_ISODEP_FSX_40 = 40, /*!< Frame Size for Proximity Card with 40 bytes */
|
|
RFAL_ISODEP_FSX_48 = 48, /*!< Frame Size for Proximity Card with 48 bytes */
|
|
RFAL_ISODEP_FSX_64 = 64, /*!< Frame Size for Proximity Card with 64 bytes */
|
|
RFAL_ISODEP_FSX_96 = 96, /*!< Frame Size for Proximity Card with 96 bytes */
|
|
RFAL_ISODEP_FSX_128 = 128, /*!< Frame Size for Proximity Card with 128 bytes */
|
|
RFAL_ISODEP_FSX_256 = 256, /*!< Frame Size for Proximity Card with 256 bytes */
|
|
RFAL_ISODEP_FSX_512 = 512, /*!< Frame Size for Proximity Card with 512 bytes ISO14443-3 Amd2 2012 */
|
|
RFAL_ISODEP_FSX_1024 = 1024, /*!< Frame Size for Proximity Card with 1024 bytes ISO14443-3 Amd2 2012 */
|
|
RFAL_ISODEP_FSX_2048 = 2048, /*!< Frame Size for Proximity Card with 2048 bytes ISO14443-3 Amd2 2012 */
|
|
RFAL_ISODEP_FSX_4096 = 4096, /*!< Frame Size for Proximity Card with 4096 bytes ISO14443-3 Amd2 2012 */
|
|
} rfalIsoDepFSx;
|
|
|
|
/*
|
|
******************************************************************************
|
|
* GLOBAL MACROS
|
|
******************************************************************************
|
|
*/
|
|
|
|
/*
|
|
******************************************************************************
|
|
* GLOBAL DATA TYPES
|
|
******************************************************************************
|
|
*/
|
|
|
|
/*! RATS format Digital 1.1 13.6.1 */
|
|
typedef struct
|
|
{
|
|
uint8_t CMD; /*!< RATS command byte: 0xE0 */
|
|
uint8_t PARAM; /*!< Param indicating FSDI and DID */
|
|
} rfalIsoDepRats;
|
|
|
|
|
|
/*! ATS response format Digital 1.1 13.6.2 */
|
|
typedef struct
|
|
{
|
|
uint8_t TL; /*!< Length Byte, including TL byte itself */
|
|
uint8_t T0; /*!< Format Byte T0 indicating if TA, TB, TC */
|
|
uint8_t TA; /*!< Interface Byte TA(1) */
|
|
uint8_t TB; /*!< Interface Byte TB(1) */
|
|
uint8_t TC; /*!< Interface Byte TC(1) */
|
|
uint8_t HB[RFAL_ISODEP_ATS_HB_MAX_LEN]; /*!< Historical Bytes */
|
|
} rfalIsoDepAts;
|
|
|
|
|
|
/*! PPS Request format (Protocol and Parameter Selection) ISO14443-4 5.3 */
|
|
typedef struct
|
|
{
|
|
uint8_t PPSS; /*!< Start Byte: [ 1101b | CID[4b] ] */
|
|
uint8_t PPS0; /*!< Parameter 0:[ 000b | PPS1[1n] | 0001b ] */
|
|
uint8_t PPS1; /*!< Parameter 1:[ 0000b | DSI[2b] | DRI[2b] ]*/
|
|
} rfalIsoDepPpsReq;
|
|
|
|
|
|
/*! PPS Response format (Protocol and Parameter Selection) ISO14443-4 5.4 */
|
|
typedef struct
|
|
{
|
|
uint8_t PPSS; /*!< Start Byte: [ 1101b | CID[4b] ] */
|
|
} rfalIsoDepPpsRes;
|
|
|
|
|
|
/*! ATTRIB Command Format Digital 1.1 15.6.1 */
|
|
typedef struct
|
|
{
|
|
uint8_t cmd; /*!< ATTRIB_REQ command byte */
|
|
uint8_t nfcid0[RFAL_NFCB_NFCID0_LEN]; /*!< NFCID0 of the card to be selected */
|
|
struct{
|
|
uint8_t PARAM1; /*!< PARAM1 of ATTRIB command */
|
|
uint8_t PARAM2; /*!< PARAM2 of ATTRIB command */
|
|
uint8_t PARAM3; /*!< PARAM3 of ATTRIB command */
|
|
uint8_t PARAM4; /*!< PARAM4 of ATTRIB command */
|
|
}Param; /*!< Parameter of ATTRIB command */
|
|
uint8_t HLInfo[RFAL_ISODEP_ATTRIB_HLINFO_LEN]; /*!< Higher Layer Information */
|
|
} rfalIsoDepAttribCmd;
|
|
|
|
|
|
/*! ATTRIB Response Format Digital 1.1 15.6.2 */
|
|
typedef struct
|
|
{
|
|
uint8_t mbliDid; /*!< Contains MBLI and DID */
|
|
uint8_t HLInfo[RFAL_ISODEP_ATTRIB_HLINFO_LEN]; /*!< Higher Layer Information */
|
|
} rfalIsoDepAttribRes;
|
|
|
|
/*! S(Parameters) Command Format ISO14443-4 (2016) Table 4 */
|
|
typedef struct
|
|
{
|
|
uint8_t tag; /*!< S(PARAMETERS) Tag field */
|
|
uint8_t length; /*!< S(PARAMETERS) Length field */
|
|
uint8_t value[RFAL_ISODEP_SPARAM_VALUES_MAX_LEN]; /*!< S(PARAMETERS) Value field */
|
|
} rfalIsoDepSParameter;
|
|
|
|
|
|
/*! Activation info as Poller and Listener for NFC-A and NFC-B */
|
|
typedef union {/* PRQA S 0750 # MISRA 19.2 - Both members of the union will not be used concurrently, device is only of type A or B at a time. Thus no problem can occur. */
|
|
|
|
/*! NFC-A information */
|
|
union {/* PRQA S 0750 # MISRA 19.2 - Both members of the union will not be used concurrently, device is only PCD or PICC at a time. Thus no problem can occur. */
|
|
struct {
|
|
rfalIsoDepAts ATS; /*!< ATS response (Poller mode) */
|
|
uint8_t ATSLen; /*!< ATS response length (Poller mode) */
|
|
}Listener;
|
|
struct {
|
|
rfalIsoDepRats RATS; /*!< RATS request (Listener mode) */
|
|
}Poller;
|
|
}A;
|
|
|
|
/*! NFC-B information */
|
|
union {/* PRQA S 0750 # MISRA 19.2 - Both members of the union will not be used concurrently, device is only PCD or PICC at a time. Thus no problem can occur. */
|
|
struct{
|
|
rfalIsoDepAttribRes ATTRIB_RES; /*!< ATTRIB_RES (Poller mode) */
|
|
uint8_t ATTRIB_RESLen; /*!< ATTRIB_RES length (Poller mode) */
|
|
}Listener;
|
|
struct{
|
|
rfalIsoDepAttribCmd ATTRIB; /*!< ATTRIB request (Listener mode) */
|
|
uint8_t ATTRIBLen; /*!< ATTRIB request length (Listener mode) */
|
|
}Poller;
|
|
}B;
|
|
}rfalIsoDepActivation;
|
|
|
|
|
|
/*! ISO-DEP device Info */
|
|
typedef struct {
|
|
uint8_t FWI; /*!< Frame Waiting Integer */
|
|
uint32_t FWT; /*!< Frame Waiting Time (1/fc) */
|
|
uint32_t dFWT; /*!< Delta Frame Waiting Time (1/fc) */
|
|
uint32_t SFGI; /*!< Start-up Frame Guard time Integer */
|
|
uint32_t SFGT; /*!< Start-up Frame Guard Time (ms) */
|
|
uint8_t FSxI; /*!< Frame Size Device/Card Integer (FSDI or FSCI) */
|
|
uint16_t FSx; /*!< Frame Size Device/Card (FSD or FSC) */
|
|
uint32_t MBL; /*!< Maximum Buffer Length (optional for NFC-B) */
|
|
rfalBitRate DSI; /*!< Bit Rate coding from Listener (PICC) to Poller (PCD) */
|
|
rfalBitRate DRI; /*!< Bit Rate coding from Poller (PCD) to Listener (PICC) */
|
|
uint8_t DID; /*!< Device ID */
|
|
uint8_t NAD; /*!< Node ADdress */
|
|
bool supDID; /*!< DID supported flag */
|
|
bool supNAD; /*!< NAD supported flag */
|
|
bool supAdFt; /*!< Advanced Features supported flag */
|
|
} rfalIsoDepInfo;
|
|
|
|
|
|
/*! ISO-DEP Device structure */
|
|
typedef struct {
|
|
rfalIsoDepActivation activation; /*!< Activation Info */
|
|
rfalIsoDepInfo info; /*!< ISO-DEP (ISO14443-4) device Info */
|
|
} rfalIsoDepDevice;
|
|
|
|
|
|
/*! ATTRIB Response parameters */
|
|
typedef struct
|
|
{
|
|
uint8_t mbli; /*!< MBLI */
|
|
uint8_t HLInfo[RFAL_ISODEP_ATTRIB_HLINFO_LEN]; /*!< Hi Layer Information */
|
|
uint8_t HLInfoLen; /*!< Hi Layer Information Length */
|
|
} rfalIsoDepAttribResParam;
|
|
|
|
|
|
/*! ATS Response parameter */
|
|
typedef struct
|
|
{
|
|
uint8_t fsci; /*!< Frame Size of Proximity Card Integer */
|
|
uint8_t fwi; /*!< Frame Waiting Time Integer */
|
|
uint8_t sfgi; /*!< Start-Up Frame Guard Time Integer */
|
|
bool didSupport; /*!< DID Supported */
|
|
uint8_t ta; /*!< Max supported bitrate both direction */
|
|
uint8_t *hb; /*!< Historical Bytes data */
|
|
uint8_t hbLen; /*!< Historical Bytes Length */
|
|
} rfalIsoDepAtsParam;
|
|
|
|
|
|
/*! Structure of I-Block Buffer format from caller */
|
|
typedef struct
|
|
{
|
|
uint8_t prologue[RFAL_ISODEP_PROLOGUE_SIZE]; /*!< Prologue/SoD buffer */
|
|
uint8_t inf[RFAL_FEATURE_ISO_DEP_IBLOCK_MAX_LEN]; /*!< INF/Payload buffer */
|
|
} rfalIsoDepBufFormat;
|
|
|
|
|
|
/*! Structure of APDU Buffer format from caller */
|
|
typedef struct
|
|
{
|
|
uint8_t prologue[RFAL_ISODEP_PROLOGUE_SIZE]; /*!< Prologue/SoD buffer */
|
|
uint8_t apdu[RFAL_FEATURE_ISO_DEP_APDU_MAX_LEN]; /*!< APDU/Payload buffer */
|
|
} rfalIsoDepApduBufFormat;
|
|
|
|
|
|
/*! Listen Activation Parameters Structure */
|
|
typedef struct
|
|
{
|
|
rfalIsoDepBufFormat *rxBuf; /*!< Receive Buffer struct reference */
|
|
uint16_t *rxLen; /*!< Received INF data length in Bytes */
|
|
bool *isRxChaining; /*!< Received data is not complete */
|
|
rfalIsoDepDevice *isoDepDev; /*!< ISO-DEP device info */
|
|
} rfalIsoDepListenActvParam;
|
|
|
|
|
|
/*! Structure of parameters used on ISO DEP Transceive */
|
|
typedef struct
|
|
{
|
|
rfalIsoDepBufFormat *txBuf; /*!< Transmit Buffer struct reference */
|
|
uint16_t txBufLen; /*!< Transmit Buffer INF field length in Bytes*/
|
|
bool isTxChaining; /*!< Transmit data is not complete */
|
|
rfalIsoDepBufFormat *rxBuf; /*!< Receive Buffer struct reference in Bytes */
|
|
uint16_t *rxLen; /*!< Received INF data length in Bytes */
|
|
bool *isRxChaining; /*!< Received data is not complete */
|
|
uint32_t FWT; /*!< FWT to be used (ignored in Listen Mode) */
|
|
uint32_t dFWT; /*!< Delta FWT to be used */
|
|
uint16_t ourFSx; /*!< Our device Frame Size (FSD or FSC) */
|
|
uint16_t FSx; /*!< Other device Frame Size (FSD or FSC) */
|
|
uint8_t DID; /*!< Device ID (RFAL_ISODEP_NO_DID if no DID) */
|
|
} rfalIsoDepTxRxParam;
|
|
|
|
|
|
/*! Structure of parameters used on ISO DEP APDU Transceive */
|
|
typedef struct
|
|
{
|
|
rfalIsoDepApduBufFormat *txBuf; /*!< Transmit Buffer struct reference */
|
|
uint16_t txBufLen; /*!< Transmit Buffer INF field length in Bytes*/
|
|
rfalIsoDepApduBufFormat *rxBuf; /*!< Receive Buffer struct reference in Bytes */
|
|
uint16_t *rxLen; /*!< Received INF data length in Bytes */
|
|
rfalIsoDepBufFormat *tmpBuf; /*!< Temp buffer for Rx I-Blocks (internal) */
|
|
uint32_t FWT; /*!< FWT to be used (ignored in Listen Mode) */
|
|
uint32_t dFWT; /*!< Delta FWT to be used */
|
|
uint16_t FSx; /*!< Other device Frame Size (FSD or FSC) */
|
|
uint16_t ourFSx; /*!< Our device Frame Size (FSD or FSC) */
|
|
uint8_t DID; /*!< Device ID (RFAL_ISODEP_NO_DID if no DID) */
|
|
} rfalIsoDepApduTxRxParam;
|
|
|
|
/*
|
|
******************************************************************************
|
|
* GLOBAL FUNCTION PROTOTYPES
|
|
******************************************************************************
|
|
*/
|
|
|
|
|
|
/*!
|
|
******************************************************************************
|
|
* \brief Initialize the ISO-DEP protocol
|
|
*
|
|
* Initialize the ISO-DEP protocol layer with default config
|
|
******************************************************************************
|
|
*/
|
|
void rfalIsoDepInitialize( void );
|
|
|
|
|
|
/*!
|
|
******************************************************************************
|
|
* \brief Initialize the ISO-DEP protocol
|
|
*
|
|
* Initialize the ISO-DEP protocol layer with additional parameters allowing
|
|
* to customise the protocol layer for specific behaviours
|
|
*
|
|
|
|
* \param[in] compMode : Compliance mode to be performed
|
|
* \param[in] maxRetriesR : Number of retries for a R-Block
|
|
* Digital 2.0 B9 - nRETRY ACK/NAK: [2,5]
|
|
* \param[in] maxRetriesSnWTX : Number of retries for a S(WTX) (only in case
|
|
* of NAKs) Digital 2.0 B9 - nRETRY WTX[2,5]
|
|
* \param[in] maxRetriesSWTX : Number of overall S(WTX) retries.
|
|
* Use RFAL_ISODEP_MAX_WTX_RETRYS_ULTD for disabling
|
|
* this limit check Digital 2.0 16.2.5.2
|
|
* \param[in] maxRetriesSDSL : Number of retries for a S(DESELECT)
|
|
* Digital 2.0 B9 - nRETRY DESELECT: [0,5]
|
|
* \param[in] maxRetriesI : Number of retries for a I-Block
|
|
* Digital 2.0 16.2.5.4
|
|
* \param[in] maxRetriesRATS : Number of retries for RATS
|
|
* Digital 2.0 B7 - nRETRY RATS [0,1]
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
void rfalIsoDepInitializeWithParams( rfalComplianceMode compMode,
|
|
uint8_t maxRetriesR,
|
|
uint8_t maxRetriesSnWTX,
|
|
uint8_t maxRetriesSWTX,
|
|
uint8_t maxRetriesSDSL,
|
|
uint8_t maxRetriesI,
|
|
uint8_t maxRetriesRATS );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief FSxI to FSx
|
|
*
|
|
* Convert Frame Size for proximity coupling Device Integer (FSxI) to
|
|
* Frame Size for proximity coupling Device (FSx)
|
|
*
|
|
* FSD - maximum frame size for NFC Forum Device in Poll Mode
|
|
* FSC - maximum frame size for NFC Forum Device in Listen Mode
|
|
*
|
|
* FSxI = FSDI or FSCI
|
|
* FSx = FSD or FSC
|
|
*
|
|
* The FSD/FSC value includes the header and CRC
|
|
*
|
|
* \param[in] FSxI : Frame Size for proximity coupling Device Integer
|
|
*
|
|
* \return fsx : Frame Size for proximity coupling Device (FSD or FSC)
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
uint16_t rfalIsoDepFSxI2FSx( uint8_t FSxI );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief FWI to FWT
|
|
*
|
|
* Convert Frame Waiting time Integer (FWI) to Frame Waiting Time (FWT) in
|
|
* 1/fc units
|
|
*
|
|
* \param[in] fwi : Frame Waiting time Integer
|
|
*
|
|
* \return fwt : Frame Waiting Time in 1/fc units
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
uint32_t rfalIsoDepFWI2FWT( uint8_t fwi );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Check if the buffer data contains a valid RATS command
|
|
*
|
|
* Check if it is a well formed RATS command with 2 bytes
|
|
* This function does not check the validity of FSDI and DID
|
|
*
|
|
* \param[in] buf : reference to buffer containing the data to be checked
|
|
* \param[in] bufLen : length of data in the buffer in bytes
|
|
*
|
|
* \return true if the data indicates a RATS command; false otherwise
|
|
*****************************************************************************
|
|
*/
|
|
bool rfalIsoDepIsRats( const uint8_t *buf, uint8_t bufLen );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Check if the buffer data contains a valid ATTRIB command
|
|
*
|
|
* Check if it is a well formed ATTRIB command, but does not check the
|
|
* validity of the information inside
|
|
*
|
|
* \param[in] buf : reference to buffer containing the data to be checked
|
|
* \param[in] bufLen : length of data in the buffer in bytes
|
|
*
|
|
* \return true if the data indicates a ATTRIB command; false otherwise
|
|
*****************************************************************************
|
|
*/
|
|
bool rfalIsoDepIsAttrib( const uint8_t *buf, uint8_t bufLen );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Start Listen Activation Handling
|
|
*
|
|
* Start Listen Activation Handling and setup to receive first I-block which may
|
|
* contain complete or partial APDU after activation is completed
|
|
*
|
|
* Pass in RATS for T4AT, or ATTRIB for T4BT, to handle ATS or ATTRIB Response respectively
|
|
* The Activation Handling handles ATS and ATTRIB Response; and additionally PPS Response
|
|
* if a PPS is received for T4AT.
|
|
* The method uses the current RFAL state machine to determine if it is expecting RATS or ATTRIB
|
|
*
|
|
* Activation is completed if PPS Response is sent or if first PDU is received in T4T-A
|
|
* Activation is completed if ATTRIB Response is sent in T4T-B
|
|
*
|
|
* \ref rfalIsoDepListenGetActivationStatus provide status if activation is completed.
|
|
* \ref rfalIsoDepStartTransceive shall be called right after activation is completed
|
|
*
|
|
* \param[in] atsParam : reference to ATS parameters
|
|
* \param[in] attribResParam : reference to ATTRIB_RES parameters
|
|
* \param[in] buf : reference to buffer containing RATS or ATTRIB
|
|
* \param[in] bufLen : length in bytes of the given bufffer
|
|
* \param[in] actParam : reference to incoming reception information will be placed
|
|
*
|
|
*
|
|
* \warning Once the Activation has been completed the method
|
|
* rfalIsoDepGetTransceiveStatus() must be called.
|
|
* If activation has completed due to reception of a data block (not PPS) the
|
|
* buffer owned by the caller and passed on actParam must still contain this data.
|
|
* The first data will be processed (I-Block or S-DSL) by rfalIsoDepGetTransceiveStatus()
|
|
* inform the caller and then for the next transaction use rfalIsoDepStartTransceive()
|
|
*
|
|
* \return ERR_NONE : RATS/ATTRIB is valid and activation has started
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_PROTO : Invalid request
|
|
* \return ERR_NOTSUPP : Feature not supported
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepListenStartActivation( rfalIsoDepAtsParam *atsParam, const rfalIsoDepAttribResParam *attribResParam, const uint8_t *buf, uint16_t bufLen, rfalIsoDepListenActvParam actParam );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Get the current Activation Status
|
|
*
|
|
* \return ERR_NONE if Activation is already completed
|
|
* \return ERR_BUSY if Activation is ongoing
|
|
* \return ERR_LINK_LOSS if Remote Field is turned off
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepListenGetActivationStatus( void );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Get the ISO-DEP Communication Information
|
|
*
|
|
* Gets the maximum INF length in bytes based on current Frame Size
|
|
* for proximity coupling Device (FSD or FSC) excluding the header and CRC
|
|
*
|
|
* \return maximum INF length in bytes
|
|
*****************************************************************************
|
|
*/
|
|
uint16_t rfalIsoDepGetMaxInfLen( void );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Start Transceive
|
|
*
|
|
* This method triggers a ISO-DEP Transceive containing a complete or
|
|
* partial APDU
|
|
* It transmits the given message and handles all protocol retransmitions,
|
|
* error handling and control messages
|
|
*
|
|
* The txBuf contains a complete or partial APDU (INF) to be transmitted
|
|
* The Prologue field will be manipulated by the Transceive
|
|
*
|
|
* If the buffer contains a partial APDU and is not the last block,
|
|
* then isTxChaining must be set to true
|
|
*
|
|
* \param[in] param: reference parameters to be used for the Transceive
|
|
*
|
|
* \return ERR_PARAM : Bad request
|
|
* \return ERR_WRONG_STATE : The module is not in a proper state
|
|
* \return ERR_NONE : The Transceive request has been started
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepStartTransceive( rfalIsoDepTxRxParam param );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Get the Transceive status
|
|
*
|
|
* Returns the status of the ISO-DEP Transceive
|
|
*
|
|
* \warning When the other device is performing chaining once a chained
|
|
* block is received the error ERR_AGAIN is sent. At this point
|
|
* caller must handle the received data immediately.
|
|
* When ERR_AGAIN is returned an ACK has already been sent to
|
|
* the other device and the next block might be incoming.
|
|
* If rfalWorker() is called frequently it will place the next
|
|
* block on the given buffer
|
|
*
|
|
*
|
|
* \return ERR_NONE : Transceive has been completed successfully
|
|
* \return ERR_BUSY : Transceive is ongoing
|
|
* \return ERR_PROTO : Protocol error occurred
|
|
* \return ERR_TIMEOUT : Timeout error occurred
|
|
* \return ERR_SLEEP_REQ : Deselect has been received and responded
|
|
* \return ERR_NOMEM : The received INF does not fit into the
|
|
* receive buffer
|
|
* \return ERR_LINK_LOSS : Communication is lost because Reader/Writer
|
|
* has turned off its field
|
|
* \return ERR_AGAIN : received one chaining block, continue to call
|
|
* this method to retrieve the remaining blocks
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepGetTransceiveStatus( void );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Start APDU Transceive
|
|
*
|
|
* This method triggers a ISO-DEP Transceive containing a complete APDU
|
|
* It transmits the given message and handles all protocol retransmitions,
|
|
* error handling and control messages
|
|
*
|
|
* The txBuf contains a complete APDU to be transmitted
|
|
* The Prologue field will be manipulated by the Transceive
|
|
*
|
|
* \warning the txBuf will be modified during the transmission
|
|
* \warning the maximum RF frame which can be received is limited by param.tmpBuf
|
|
*
|
|
* \param[in] param: reference parameters to be used for the Transceive
|
|
*
|
|
* \return ERR_PARAM : Bad request
|
|
* \return ERR_WRONG_STATE : The module is not in a proper state
|
|
* \return ERR_NONE : The Transceive request has been started
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepStartApduTransceive( rfalIsoDepApduTxRxParam param );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Get the APDU Transceive status
|
|
*
|
|
* \return ERR_NONE : if Transceive has been completed successfully
|
|
* \return ERR_BUSY : if Transceive is ongoing
|
|
* \return ERR_PROTO : if a protocol error occurred
|
|
* \return ERR_TIMEOUT : if a timeout error occurred
|
|
* \return ERR_SLEEP_REQ : if Deselect is received and responded
|
|
* \return ERR_NOMEM : if the received INF does not fit into the
|
|
* receive buffer
|
|
* \return ERR_LINK_LOSS : if communication is lost because Reader/Writer
|
|
* has turned off its field
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepGetApduTransceiveStatus( void );
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Send RATS
|
|
*
|
|
* This sends a RATS to make a NFC-A Listen Device to enter
|
|
* ISO-DEP layer (ISO14443-4) and checks if the received ATS is valid
|
|
*
|
|
* \param[in] FSDI : Frame Size Device Integer to be used
|
|
* \param[in] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
|
|
* \param[out] ats : pointer to place the ATS Response
|
|
* \param[out] atsLen : pointer to place the ATS length
|
|
*
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_PAR : Parity error detected
|
|
* \return ERR_CRC : CRC error detected
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, ATS received
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepRATS( rfalIsoDepFSxI FSDI, uint8_t DID, rfalIsoDepAts *ats , uint8_t *atsLen );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Send PPS
|
|
*
|
|
* This sends a PPS to make a NFC-A Listen Device change the communications
|
|
* bit rate from 106kbps to one of the supported bit rates
|
|
* Additionally checks if the received PPS response is valid
|
|
*
|
|
* \param[in] DID : Device ID
|
|
* \param[in] DSI : DSI code the divisor from Listener (PICC) to Poller (PCD)
|
|
* \param[in] DRI : DRI code the divisor from Poller (PCD) to Listener (PICC)
|
|
* \param[out] ppsRes : pointer to place the PPS Response
|
|
*
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_PAR : Parity error detected
|
|
* \return ERR_CRC : CRC error detected
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, PPS Response received
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepPPS( uint8_t DID, rfalBitRate DSI, rfalBitRate DRI, rfalIsoDepPpsRes *ppsRes );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Send ATTRIB
|
|
*
|
|
* This sends a ATTRIB to make a NFC-B Listen Device to enter
|
|
* ISO-DEP layer (ISO14443-4) and checks if the received ATTRIB Response is valid
|
|
*
|
|
* \param[in] nfcid0 : NFCID0 to be used for the ATTRIB
|
|
* \param[in] PARAM1 : ATTRIB PARAM1 byte (communication parameters)
|
|
* \param[in] DSI : DSI code the divisor from Listener (PICC) to Poller (PCD)
|
|
* \param[in] DRI : DRI code the divisor from Poller (PCD) to Listener (PICC)
|
|
* \param[in] FSDI : PCD's Frame Size to be announced on the ATTRIB
|
|
* \param[in] PARAM3 : ATTRIB PARAM1 byte (protocol type)
|
|
* \param[in] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
|
|
* \param[in] HLInfo : pointer to Higher layer INF (NULL if none)
|
|
* \param[in] HLInfoLen : Length HLInfo
|
|
* \param[in] fwt : Frame Waiting Time to be used (from SENSB_RES)
|
|
* \param[out] attribRes : pointer to place the ATTRIB Response
|
|
* \param[out] attribResLen : pointer to place the ATTRIB Response length
|
|
*
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_CRC : CRC error detected
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, ATTRIB Response received
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepATTRIB( const uint8_t* nfcid0, uint8_t PARAM1, rfalBitRate DSI, rfalBitRate DRI, rfalIsoDepFSxI FSDI, uint8_t PARAM3, uint8_t DID, const uint8_t* HLInfo, uint8_t HLInfoLen, uint32_t fwt, rfalIsoDepAttribRes *attribRes, uint8_t *attribResLen );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Deselects PICC
|
|
*
|
|
* This function sends a deselect command to PICC and waits for it`s
|
|
* responce in a blocking way
|
|
*
|
|
* \return ERR_NONE : Deselect successfully sent and acknowledged by PICC
|
|
* \return ERR_TIMEOUT: No response rcvd from PICC
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepDeselect( void );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Poller Handle NFC-A Activation
|
|
*
|
|
* This performs a NFC-A Activation into ISO-DEP layer (ISO14443-4) with the given
|
|
* parameters. It sends RATS and if the higher bit rates are supported by
|
|
* both devices it additionally sends PPS
|
|
* Once Activated all details of the device are provided on isoDepDev
|
|
*
|
|
* \param[in] FSDI : Frame Size Device Integer to be used
|
|
* \param[in] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
|
|
* \param[in] maxBR : Max bit rate supported by the Poller
|
|
* \param[out] isoDepDev : ISO-DEP information of the activated Listen device
|
|
*
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_PAR : Parity error detected
|
|
* \return ERR_CRC : CRC error detected
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, activation successful
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepPollAHandleActivation( rfalIsoDepFSxI FSDI, uint8_t DID, rfalBitRate maxBR, rfalIsoDepDevice *isoDepDev );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Poller Handle NFC-B Activation
|
|
*
|
|
* This performs a NFC-B Activation into ISO-DEP layer (ISO14443-4) with the given
|
|
* parameters. It sends ATTRIB and calculates supported higher bit rates of both
|
|
* devices and performs activation.
|
|
* Once Activated all details of the device are provided on isoDepDev
|
|
*
|
|
* \param[in] FSDI : Frame Size Device Integer to be used
|
|
* \param[in] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
|
|
* \param[in] maxBR : Max bit rate supported by the Poller
|
|
* \param[in] PARAM1 : ATTRIB PARAM1 byte (communication parameters)
|
|
* \param[in] nfcbDev : pointer to the NFC-B Device containing the SENSB_RES
|
|
* \param[in] HLInfo : pointer to Higher layer INF (NULL if none)
|
|
* \param[in] HLInfoLen : Length HLInfo
|
|
* \param[out] isoDepDev : ISO-DEP information of the activated Listen device
|
|
*
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_PAR : Parity error detected
|
|
* \return ERR_CRC : CRC error detected
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, activation successful
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepPollBHandleActivation( rfalIsoDepFSxI FSDI, uint8_t DID, rfalBitRate maxBR, uint8_t PARAM1, const rfalNfcbListenDevice *nfcbDev, const uint8_t* HLInfo, uint8_t HLInfoLen, rfalIsoDepDevice *isoDepDev );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Poller Handle S(Parameters)
|
|
*
|
|
* This checks if PICC supports S(PARAMETERS), retieves PICC's
|
|
* capabilities and sets the Bit Rate at the highest supported by both
|
|
* devices
|
|
*
|
|
* \param[out] isoDepDev : ISO-DEP information of the activated Listen device
|
|
* \param[in] maxTxBR : Maximum Tx bit rate supported by PCD
|
|
* \param[in] maxRxBR : Maximum Rx bit rate supported by PCD
|
|
*
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, S(PARAMETERS) selection successful
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepPollHandleSParameters( rfalIsoDepDevice *isoDepDev, rfalBitRate maxTxBR, rfalBitRate maxRxBR );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Poller Start NFC-A Activation
|
|
*
|
|
* This starts a NFC-A Activation into ISO-DEP layer (ISO14443-4) with the given
|
|
* parameters. It sends RATS and if the higher bit rates are supported by
|
|
* both devices it additionally sends PPS
|
|
* Once Activated all details of the device are provided on isoDepDev
|
|
*
|
|
*
|
|
* \see rfalIsoDepPollAGetActivationStatus
|
|
*
|
|
* \param[in] FSDI : Frame Size Device Integer to be used
|
|
* \param[in] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
|
|
* \param[in] maxBR : Max bit rate supported by the Poller
|
|
* \param[out] isoDepDev : ISO-DEP information of the activated Listen device
|
|
*
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_PAR : Parity error detected
|
|
* \return ERR_CRC : CRC error detected
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, start of asynchronous operation successful
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepPollAStartActivation( rfalIsoDepFSxI FSDI, uint8_t DID, rfalBitRate maxBR, rfalIsoDepDevice *isoDepDev );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Poller Get NFC-A Activation Status
|
|
*
|
|
* Returns the activation status started by rfalIsoDepPollAStartActivation
|
|
*
|
|
* \see rfalIsoDepPollAStartActivation
|
|
*
|
|
* \return ERR_BUSY : Operation is ongoing
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_PAR : Parity error detected
|
|
* \return ERR_CRC : CRC error detected
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, activation successful
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepPollAGetActivationStatus( void );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Poller Start NFC-B Activation
|
|
*
|
|
* This starts a NFC-B Activation into ISO-DEP layer (ISO14443-4) with the given
|
|
* parameters. It will send ATTRIB and calculate supported higher bit rates of both
|
|
* devices and perform activation.
|
|
* Once Activated all details of the device are provided on isoDepDev
|
|
*
|
|
* \see rfalIsoDepPollBGetActivationStatus
|
|
*
|
|
* \param[in] FSDI : Frame Size Device Integer to be used
|
|
* \param[in] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
|
|
* \param[in] maxBR : Max bit rate supported by the Poller
|
|
* \param[in] PARAM1 : ATTRIB PARAM1 byte (communication parameters)
|
|
* \param[in] nfcbDev : pointer to the NFC-B Device containing the SENSB_RES
|
|
* \param[in] HLInfo : pointer to Higher layer INF (NULL if none)
|
|
* \param[in] HLInfoLen : Length HLInfo
|
|
* \param[out] isoDepDev : ISO-DEP information of the activated Listen device
|
|
*
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_PAR : Parity error detected
|
|
* \return ERR_CRC : CRC error detected
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, start of asynchronous operation successful
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepPollBStartActivation( rfalIsoDepFSxI FSDI, uint8_t DID, rfalBitRate maxBR, uint8_t PARAM1, const rfalNfcbListenDevice *nfcbDev, const uint8_t* HLInfo, uint8_t HLInfoLen, rfalIsoDepDevice *isoDepDev );
|
|
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief ISO-DEP Poller Get NFC-B Activation Status
|
|
*
|
|
* Returns the activation status started by rfalIsoDepPollBStartActivation
|
|
*
|
|
* \see rfalIsoDepPollBStartActivation
|
|
*
|
|
* \return ERR_BUSY : Operation is ongoing
|
|
* \return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
|
|
* \return ERR_PARAM : Invalid parameters
|
|
* \return ERR_IO : Generic internal error
|
|
* \return ERR_TIMEOUT : Timeout error
|
|
* \return ERR_PAR : Parity error detected
|
|
* \return ERR_CRC : CRC error detected
|
|
* \return ERR_FRAMING : Framing error detected
|
|
* \return ERR_PROTO : Protocol error detected
|
|
* \return ERR_NONE : No error, activation successful
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode rfalIsoDepPollBGetActivationStatus( void );
|
|
|
|
|
|
#endif /* RFAL_ISODEP_H_ */
|
|
|
|
/**
|
|
* @}
|
|
*
|
|
* @}
|
|
*
|
|
* @}
|
|
*/
|