mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-23 03:03:10 +00:00
c1c069e95f
* move f3-1 to f4, remove f3 * remove f2 * remove firmware F3 for pipeline * remove patch for F4 makefile * fix fw makefile * migrate bootloader to f4
124 lines
3.4 KiB
C
124 lines
3.4 KiB
C
#include "main.h"
|
|
|
|
#define SD_DUMMY_BYTE 0xFF
|
|
#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_RESET)
|
|
#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_SET)
|
|
|
|
const uint32_t SpiTimeout = 1000;
|
|
extern SPI_HandleTypeDef SPI_SD_HANDLE;
|
|
uint8_t SD_IO_WriteByte(uint8_t Data);
|
|
|
|
/******************************************************************************
|
|
BUS OPERATIONS
|
|
*******************************************************************************/
|
|
|
|
/**
|
|
* @brief SPI error treatment function
|
|
* @retval None
|
|
*/
|
|
static void SPIx_Error(void) {
|
|
/* De-initialize the SPI communication BUS */
|
|
HAL_SPI_DeInit(&SPI_SD_HANDLE);
|
|
|
|
/* Re-Initiaize the SPI communication BUS */
|
|
HAL_SPI_Init(&SPI_SD_HANDLE);
|
|
}
|
|
|
|
/**
|
|
* @brief SPI Write byte(s) to device
|
|
* @param DataIn: Pointer to data buffer to write
|
|
* @param DataOut: Pointer to data buffer for read data
|
|
* @param DataLength: number of bytes to write
|
|
* @retval None
|
|
*/
|
|
static void SPIx_WriteReadData(const uint8_t* DataIn, uint8_t* DataOut, uint16_t DataLength) {
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
status =
|
|
HAL_SPI_TransmitReceive(&SPI_SD_HANDLE, (uint8_t*)DataIn, DataOut, DataLength, SpiTimeout);
|
|
|
|
/* Check the communication status */
|
|
if(status != HAL_OK) {
|
|
/* Execute user timeout callback */
|
|
SPIx_Error();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief SPI Write a byte to device
|
|
* @param Value: value to be written
|
|
* @retval None
|
|
*/
|
|
__attribute__((unused)) static void SPIx_Write(uint8_t Value) {
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
uint8_t data;
|
|
|
|
status = HAL_SPI_TransmitReceive(&SPI_SD_HANDLE, (uint8_t*)&Value, &data, 1, SpiTimeout);
|
|
|
|
/* Check the communication status */
|
|
if(status != HAL_OK) {
|
|
/* Execute user timeout callback */
|
|
SPIx_Error();
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
LINK OPERATIONS
|
|
*******************************************************************************/
|
|
|
|
/********************************* LINK SD ************************************/
|
|
/**
|
|
* @brief Initialize the SD Card and put it into StandBy State (Ready for
|
|
* data transfer).
|
|
* @retval None
|
|
*/
|
|
void SD_IO_Init(void) {
|
|
uint8_t counter = 0;
|
|
|
|
/* SD chip select high */
|
|
SD_CS_HIGH();
|
|
|
|
/* Send dummy byte 0xFF, 10 times with CS high */
|
|
/* Rise CS and MOSI for 80 clocks cycles */
|
|
for(counter = 0; counter <= 200; counter++) {
|
|
/* Send dummy byte 0xFF */
|
|
SD_IO_WriteByte(SD_DUMMY_BYTE);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Set SD interface Chip Select state
|
|
* @param val: 0 (low) or 1 (high) state
|
|
* @retval None
|
|
*/
|
|
void SD_IO_CSState(uint8_t val) {
|
|
if(val == 1) {
|
|
SD_CS_HIGH();
|
|
} else {
|
|
SD_CS_LOW();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Write byte(s) on the SD
|
|
* @param DataIn: Pointer to data buffer to write
|
|
* @param DataOut: Pointer to data buffer for read data
|
|
* @param DataLength: number of bytes to write
|
|
* @retval None
|
|
*/
|
|
void SD_IO_WriteReadData(const uint8_t* DataIn, uint8_t* DataOut, uint16_t DataLength) {
|
|
/* Send the byte */
|
|
SPIx_WriteReadData(DataIn, DataOut, DataLength);
|
|
}
|
|
|
|
/**
|
|
* @brief Write a byte on the SD.
|
|
* @param Data: byte to send.
|
|
* @retval Data written
|
|
*/
|
|
uint8_t SD_IO_WriteByte(uint8_t Data) {
|
|
uint8_t tmp;
|
|
|
|
/* Send the byte */
|
|
SPIx_WriteReadData(&Data, &tmp, 1);
|
|
return tmp;
|
|
}
|