unleashed-firmware/firmware/targets/f5/api-hal/api-hal-light.c
あく 68a3f6b4b7
[FL-873] Add F5 target, lp5562 driver and api-hal-light ()
* Add F5 target, lp5562 driver and api-hal-light. Update api-usage, switch to F5 by default.
* API HAL: add i2c and hardware version api. Dolphin: show hardware version.
* OTP version generator and flashing utility.
* Assets script: fix code formatting
* Backport F5 changes to F4
* F4: disable insomnia, prevent damage to BLE RX path
* F5 HAL API Light: remove magic delay to fix magic BLE
* Dolphin: HW target validation on start
* invert RSSI indication in sub-1
* API HAL: rename board to body in version api
* Gpio tester: detach and release viewport on exit

Co-authored-by: aanper <mail@s3f.ru>
2021-02-18 15:49:32 +03:00

43 lines
No EOL
1.3 KiB
C

#include <api-hal-light.h>
#include <lp5562.h>
#define LED_CURRENT_RED 50
#define LED_CURRENT_GREEN 50
#define LED_CURRENT_BLUE 50
#define LED_CURRENT_WHITE 150
void api_hal_light_init() {
lp5562_reset();
lp5562_set_channel_current(LP5562ChannelRed, LED_CURRENT_RED);
lp5562_set_channel_current(LP5562ChannelGreen, LED_CURRENT_GREEN);
lp5562_set_channel_current(LP5562ChannelBlue, LED_CURRENT_BLUE);
lp5562_set_channel_current(LP5562ChannelWhite, LED_CURRENT_WHITE);
lp5562_set_channel_value(LP5562ChannelRed, 0x00);
lp5562_set_channel_value(LP5562ChannelGreen, 0x00);
lp5562_set_channel_value(LP5562ChannelBlue, 0x00);
lp5562_set_channel_value(LP5562ChannelWhite, 0x00);
lp5562_enable();
lp5562_configure();
}
void api_hal_light_set(Light light, uint8_t value) {
switch(light) {
case LightRed:
lp5562_set_channel_value(LP5562ChannelRed, value);
break;
case LightGreen:
lp5562_set_channel_value(LP5562ChannelGreen, value);
break;
case LightBlue:
lp5562_set_channel_value(LP5562ChannelBlue, value);
break;
case LightBacklight:
lp5562_set_channel_value(LP5562ChannelWhite, value);
break;
default:
break;
}
}