mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-11-24 13:33:06 +00:00
5c81bb8abc
* add u8g2 and ui libs * add display driver and usage example * not init display in test mode * change todo text * fix removed code * Target f2 (#107) * add ioc for flipperzero f2 * add generated f1 files to f2 * regenerate cubemx * invert initial state of led * blink backligh * shutdown backlight on idle
749 lines
21 KiB
C
749 lines
21 KiB
C
/*
|
|
|
|
u8x8_cad.c
|
|
|
|
"command arg data" interface to the graphics controller
|
|
|
|
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
|
|
|
Copyright (c) 2016, olikraus@gmail.com
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright notice, this list
|
|
of conditions and the following disclaimer.
|
|
|
|
* Redistributions in binary form must reproduce the above copyright notice, this
|
|
list of conditions and the following disclaimer in the documentation and/or other
|
|
materials provided with the distribution.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
|
The following sequence must be used for any data, which is set to the display:
|
|
|
|
|
|
uint8_t u8x8_cad_StartTransfer(u8x8_t *u8x8)
|
|
|
|
any of the following calls
|
|
uint8_t u8x8_cad_SendCmd(u8x8_t *u8x8, uint8_t cmd)
|
|
uint8_t u8x8_cad_SendArg(u8x8_t *u8x8, uint8_t arg)
|
|
uint8_t u8x8_cad_SendData(u8x8_t *u8x8, uint8_t cnt, uint8_t *data)
|
|
|
|
uint8_t u8x8_cad_EndTransfer(u8x8_t *u8x8)
|
|
|
|
|
|
|
|
*/
|
|
/*
|
|
uint8_t u8x8_cad_template(u8x8_t *u8x8, uint8_t msg, uint16_t arg_int, void *arg_ptr)
|
|
{
|
|
uint8_t i;
|
|
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
u8x8_mcd_byte_SetDC(mcd->next, 1);
|
|
u8x8_mcd_byte_Send(mcd->next, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_mcd_byte_SetDC(mcd->next, 1);
|
|
u8x8_mcd_byte_Send(mcd->next, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
u8x8_mcd_byte_SetDC(mcd->next, 0);
|
|
for( i = 0; i < 8; i++ )
|
|
u8x8_mcd_byte_Send(mcd->next, ((uint8_t *)arg_ptr)[i]);
|
|
break;
|
|
case U8X8_MSG_CAD_RESET:
|
|
return mcd->next->cb(mcd->next, msg, arg_int, arg_ptr);
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
return mcd->next->cb(mcd->next, msg, arg_int, arg_ptr);
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
return mcd->next->cb(mcd->next, msg, arg_int, arg_ptr);
|
|
default:
|
|
break;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
*/
|
|
|
|
#include "u8x8.h"
|
|
|
|
uint8_t u8x8_cad_SendCmd(u8x8_t *u8x8, uint8_t cmd)
|
|
{
|
|
return u8x8->cad_cb(u8x8, U8X8_MSG_CAD_SEND_CMD, cmd, NULL);
|
|
}
|
|
|
|
uint8_t u8x8_cad_SendArg(u8x8_t *u8x8, uint8_t arg)
|
|
{
|
|
return u8x8->cad_cb(u8x8, U8X8_MSG_CAD_SEND_ARG, arg, NULL);
|
|
}
|
|
|
|
uint8_t u8x8_cad_SendMultipleArg(u8x8_t *u8x8, uint8_t cnt, uint8_t arg)
|
|
{
|
|
while( cnt > 0 )
|
|
{
|
|
u8x8->cad_cb(u8x8, U8X8_MSG_CAD_SEND_ARG, arg, NULL);
|
|
cnt--;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
uint8_t u8x8_cad_SendData(u8x8_t *u8x8, uint8_t cnt, uint8_t *data)
|
|
{
|
|
return u8x8->cad_cb(u8x8, U8X8_MSG_CAD_SEND_DATA, cnt, data);
|
|
}
|
|
|
|
uint8_t u8x8_cad_StartTransfer(u8x8_t *u8x8)
|
|
{
|
|
return u8x8->cad_cb(u8x8, U8X8_MSG_CAD_START_TRANSFER, 0, NULL);
|
|
}
|
|
|
|
uint8_t u8x8_cad_EndTransfer(u8x8_t *u8x8)
|
|
{
|
|
return u8x8->cad_cb(u8x8, U8X8_MSG_CAD_END_TRANSFER, 0, NULL);
|
|
}
|
|
|
|
void u8x8_cad_vsendf(u8x8_t * u8x8, const char *fmt, va_list va)
|
|
{
|
|
uint8_t d;
|
|
u8x8_cad_StartTransfer(u8x8);
|
|
while( *fmt != '\0' )
|
|
{
|
|
d = (uint8_t)va_arg(va, int);
|
|
switch(*fmt)
|
|
{
|
|
case 'a': u8x8_cad_SendArg(u8x8, d); break;
|
|
case 'c': u8x8_cad_SendCmd(u8x8, d); break;
|
|
case 'd': u8x8_cad_SendData(u8x8, 1, &d); break;
|
|
}
|
|
fmt++;
|
|
}
|
|
u8x8_cad_EndTransfer(u8x8);
|
|
}
|
|
|
|
void u8x8_SendF(u8x8_t * u8x8, const char *fmt, ...)
|
|
{
|
|
va_list va;
|
|
va_start(va, fmt);
|
|
u8x8_cad_vsendf(u8x8, fmt, va);
|
|
va_end(va);
|
|
}
|
|
|
|
/*
|
|
21 c send command c
|
|
22 a send arg a
|
|
23 d send data d
|
|
24 CS on
|
|
25 CS off
|
|
254 milli delay by milliseconds
|
|
255 end of sequence
|
|
*/
|
|
|
|
void u8x8_cad_SendSequence(u8x8_t *u8x8, uint8_t const *data)
|
|
{
|
|
uint8_t cmd;
|
|
uint8_t v;
|
|
|
|
for(;;)
|
|
{
|
|
cmd = *data;
|
|
data++;
|
|
switch( cmd )
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
v = *data;
|
|
u8x8->cad_cb(u8x8, cmd, v, NULL);
|
|
data++;
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
v = *data;
|
|
u8x8_cad_SendData(u8x8, 1, &v);
|
|
data++;
|
|
break;
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
u8x8->cad_cb(u8x8, cmd, 0, NULL);
|
|
break;
|
|
case 0x0fe:
|
|
v = *data;
|
|
u8x8_gpio_Delay(u8x8, U8X8_MSG_DELAY_MILLI, v);
|
|
data++;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
uint8_t u8x8_cad_empty(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
case U8X8_MSG_CAD_INIT:
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
/*
|
|
convert to bytes by using
|
|
dc = 1 for commands and args and
|
|
dc = 0 for data
|
|
*/
|
|
uint8_t u8x8_cad_110(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
u8x8_byte_SetDC(u8x8, 1);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_byte_SetDC(u8x8, 1);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
u8x8_byte_SetDC(u8x8, 0);
|
|
//u8x8_byte_SendBytes(u8x8, arg_int, arg_ptr);
|
|
//break;
|
|
/* fall through */
|
|
case U8X8_MSG_CAD_INIT:
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
convert to bytes by using
|
|
dc = 1 for commands and args and
|
|
dc = 0 for data
|
|
t6963
|
|
*/
|
|
uint8_t u8x8_cad_100(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
u8x8_byte_SetDC(u8x8, 1);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_byte_SetDC(u8x8, 0);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
u8x8_byte_SetDC(u8x8, 0);
|
|
//u8x8_byte_SendBytes(u8x8, arg_int, arg_ptr);
|
|
//break;
|
|
/* fall through */
|
|
case U8X8_MSG_CAD_INIT:
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
convert to bytes by using
|
|
dc = 0 for commands and args and
|
|
dc = 1 for data
|
|
*/
|
|
uint8_t u8x8_cad_001(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
u8x8_byte_SetDC(u8x8, 0);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_byte_SetDC(u8x8, 0);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
u8x8_byte_SetDC(u8x8, 1);
|
|
//u8x8_byte_SendBytes(u8x8, arg_int, arg_ptr);
|
|
//break;
|
|
/* fall through */
|
|
case U8X8_MSG_CAD_INIT:
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
convert to bytes by using
|
|
dc = 0 for commands
|
|
dc = 1 for args and data
|
|
*/
|
|
uint8_t u8x8_cad_011(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
u8x8_byte_SetDC(u8x8, 0);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_byte_SetDC(u8x8, 1);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
u8x8_byte_SetDC(u8x8, 1);
|
|
//u8x8_byte_SendBytes(u8x8, arg_int, arg_ptr);
|
|
//break;
|
|
/* fall through */
|
|
case U8X8_MSG_CAD_INIT:
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* cad procedure for the ST7920 in SPI mode */
|
|
/* u8x8_byte_SetDC is not used */
|
|
uint8_t u8x8_cad_st7920_spi(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
uint8_t *data;
|
|
uint8_t b;
|
|
uint8_t i;
|
|
static uint8_t buf[16];
|
|
uint8_t *ptr;
|
|
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
u8x8_byte_SendByte(u8x8, 0x0f8);
|
|
u8x8_gpio_Delay(u8x8, U8X8_MSG_DELAY_NANO, 1);
|
|
u8x8_byte_SendByte(u8x8, arg_int & 0x0f0);
|
|
u8x8_gpio_Delay(u8x8, U8X8_MSG_DELAY_NANO, 1);
|
|
u8x8_byte_SendByte(u8x8, arg_int << 4);
|
|
u8x8_gpio_Delay(u8x8, U8X8_MSG_DELAY_NANO, 1);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_byte_SendByte(u8x8, 0x0f8);
|
|
u8x8_byte_SendByte(u8x8, arg_int & 0x0f0);
|
|
u8x8_byte_SendByte(u8x8, arg_int << 4);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
|
|
u8x8_byte_SendByte(u8x8, 0x0fa);
|
|
u8x8_gpio_Delay(u8x8, U8X8_MSG_DELAY_NANO, 1);
|
|
|
|
/* this loop should be optimized: multiple bytes should be sent */
|
|
/* u8x8_byte_SendBytes(u8x8, arg_int, arg_ptr); */
|
|
data = (uint8_t *)arg_ptr;
|
|
|
|
/* the following loop increases speed by 20% */
|
|
while( arg_int >= 8 )
|
|
{
|
|
i = 8;
|
|
ptr = buf;
|
|
do
|
|
{
|
|
b = *data++;
|
|
*ptr++= b & 0x0f0;
|
|
b <<= 4;
|
|
*ptr++= b;
|
|
i--;
|
|
} while( i > 0 );
|
|
arg_int -= 8;
|
|
u8x8_byte_SendBytes(u8x8, 16, buf);
|
|
}
|
|
|
|
|
|
while( arg_int > 0 )
|
|
{
|
|
b = *data;
|
|
u8x8_byte_SendByte(u8x8, b & 0x0f0);
|
|
u8x8_byte_SendByte(u8x8, b << 4);
|
|
data++;
|
|
arg_int--;
|
|
}
|
|
u8x8_gpio_Delay(u8x8, U8X8_MSG_DELAY_NANO, 1);
|
|
break;
|
|
case U8X8_MSG_CAD_INIT:
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
/* cad procedure for the SSD13xx family in I2C mode */
|
|
/* this procedure is also used by the ST7588 */
|
|
/* u8x8_byte_SetDC is not used */
|
|
/* U8X8_MSG_BYTE_START_TRANSFER starts i2c transfer, U8X8_MSG_BYTE_END_TRANSFER stops transfer */
|
|
/* After transfer start, a full byte indicates command or data mode */
|
|
|
|
static void u8x8_i2c_data_transfer(u8x8_t *u8x8, uint8_t arg_int, void *arg_ptr) U8X8_NOINLINE;
|
|
static void u8x8_i2c_data_transfer(u8x8_t *u8x8, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
u8x8_byte_SendByte(u8x8, 0x040);
|
|
u8x8->byte_cb(u8x8, U8X8_MSG_CAD_SEND_DATA, arg_int, arg_ptr);
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
}
|
|
|
|
/* classic version: will put a start/stop condition around each command and arg */
|
|
uint8_t u8x8_cad_ssd13xx_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
uint8_t *p;
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
/* 7 Nov 2016: Can this be improved? */
|
|
//u8x8_byte_SetDC(u8x8, 0);
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
//u8x8_byte_SendByte(u8x8, u8x8_GetI2CAddress(u8x8));
|
|
u8x8_byte_SendByte(u8x8, 0x000);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
//u8x8_byte_SetDC(u8x8, 1);
|
|
|
|
/* the FeatherWing OLED with the 32u4 transfer of long byte */
|
|
/* streams was not possible. This is broken down to */
|
|
/* smaller streams, 32 seems to be the limit... */
|
|
/* I guess this is related to the size of the Wire buffers in Arduino */
|
|
/* Unfortunately, this can not be handled in the byte level drivers, */
|
|
/* so this is done here. Even further, only 24 bytes will be sent, */
|
|
/* because there will be another byte (DC) required during the transfer */
|
|
p = arg_ptr;
|
|
while( arg_int > 24 )
|
|
{
|
|
u8x8_i2c_data_transfer(u8x8, 24, p);
|
|
arg_int-=24;
|
|
p+=24;
|
|
}
|
|
u8x8_i2c_data_transfer(u8x8, arg_int, p);
|
|
break;
|
|
case U8X8_MSG_CAD_INIT:
|
|
/* apply default i2c adr if required so that the start transfer msg can use this */
|
|
if ( u8x8->i2c_address == 255 )
|
|
u8x8->i2c_address = 0x078;
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
/* cad transfer commands are ignored */
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
/* fast version with reduced data start/stops, issue 735 */
|
|
uint8_t u8x8_cad_ssd13xx_fast_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
static uint8_t in_transfer = 0;
|
|
uint8_t *p;
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
/* improved version, takeover from ld7032 */
|
|
/* assumes, that the args of a command is not longer than 31 bytes */
|
|
/* speed improvement is about 4% compared to the classic version */
|
|
if ( in_transfer != 0 )
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
u8x8_byte_SendByte(u8x8, 0x000); /* cmd byte for ssd13xx controller */
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
in_transfer = 1;
|
|
/* lightning version: can replace the improved version from above */
|
|
/* the drawback of the lightning version is this: The complete init sequence */
|
|
/* must fit into the 32 byte Arduino Wire buffer, which might not always be the case */
|
|
/* speed improvement is about 6% compared to the classic version */
|
|
// if ( in_transfer == 0 )
|
|
// {
|
|
// u8x8_byte_StartTransfer(u8x8);
|
|
// u8x8_byte_SendByte(u8x8, 0x000); /* cmd byte for ssd13xx controller */
|
|
// in_transfer = 1;
|
|
// }
|
|
//u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
if ( in_transfer != 0 )
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
|
|
|
|
/* the FeatherWing OLED with the 32u4 transfer of long byte */
|
|
/* streams was not possible. This is broken down to */
|
|
/* smaller streams, 32 seems to be the limit... */
|
|
/* I guess this is related to the size of the Wire buffers in Arduino */
|
|
/* Unfortunately, this can not be handled in the byte level drivers, */
|
|
/* so this is done here. Even further, only 24 bytes will be sent, */
|
|
/* because there will be another byte (DC) required during the transfer */
|
|
p = arg_ptr;
|
|
while( arg_int > 24 )
|
|
{
|
|
u8x8_i2c_data_transfer(u8x8, 24, p);
|
|
arg_int-=24;
|
|
p+=24;
|
|
}
|
|
u8x8_i2c_data_transfer(u8x8, arg_int, p);
|
|
in_transfer = 0;
|
|
break;
|
|
case U8X8_MSG_CAD_INIT:
|
|
/* apply default i2c adr if required so that the start transfer msg can use this */
|
|
if ( u8x8->i2c_address == 255 )
|
|
u8x8->i2c_address = 0x078;
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
in_transfer = 0;
|
|
break;
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
if ( in_transfer != 0 )
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
in_transfer = 0;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
|
|
/* the st75256 i2c driver is a copy of the ssd13xx driver, but with arg=1 */
|
|
/* modified from cad001 (ssd13xx) to cad011 */
|
|
uint8_t u8x8_cad_st75256_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
uint8_t *p;
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
u8x8_byte_SendByte(u8x8, 0x000);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
u8x8_byte_SendByte(u8x8, 0x040);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
/* see ssd13xx driver */
|
|
p = arg_ptr;
|
|
while( arg_int > 24 )
|
|
{
|
|
u8x8_i2c_data_transfer(u8x8, 24, p);
|
|
arg_int-=24;
|
|
p+=24;
|
|
}
|
|
u8x8_i2c_data_transfer(u8x8, arg_int, p);
|
|
break;
|
|
case U8X8_MSG_CAD_INIT:
|
|
/* apply default i2c adr if required so that the start transfer msg can use this */
|
|
if ( u8x8->i2c_address == 255 )
|
|
u8x8->i2c_address = 0x078; /* ST75256, often this is 0x07e */
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
/* cad transfer commands are ignored */
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* cad i2c procedure for the ld7032 controller */
|
|
/* Issue https://github.com/olikraus/u8g2/issues/865 mentiones, that I2C does not work */
|
|
/* Workaround is to remove the while loop (or increase the value in the condition) */
|
|
uint8_t u8x8_cad_ld7032_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
static uint8_t in_transfer = 0;
|
|
uint8_t *p;
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
if ( in_transfer != 0 )
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
in_transfer = 1;
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
//u8x8_byte_SetDC(u8x8, 1);
|
|
|
|
/* the FeatherWing OLED with the 32u4 transfer of long byte */
|
|
/* streams was not possible. This is broken down to */
|
|
/* smaller streams, 32 seems to be the limit... */
|
|
/* I guess this is related to the size of the Wire buffers in Arduino */
|
|
/* Unfortunately, this can not be handled in the byte level drivers, */
|
|
/* so this is done here. Even further, only 24 bytes will be sent, */
|
|
/* because there will be another byte (DC) required during the transfer */
|
|
p = arg_ptr;
|
|
while( arg_int > 24 )
|
|
{
|
|
u8x8->byte_cb(u8x8, U8X8_MSG_CAD_SEND_DATA, 24, p);
|
|
arg_int-=24;
|
|
p+=24;
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
u8x8_byte_SendByte(u8x8, 0x08); /* data write for LD7032 */
|
|
}
|
|
u8x8->byte_cb(u8x8, U8X8_MSG_CAD_SEND_DATA, arg_int, p);
|
|
break;
|
|
case U8X8_MSG_CAD_INIT:
|
|
/* apply default i2c adr if required so that the start transfer msg can use this */
|
|
if ( u8x8->i2c_address == 255 )
|
|
u8x8->i2c_address = 0x060;
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
in_transfer = 0;
|
|
break;
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
if ( in_transfer != 0 )
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* cad procedure for the UC16xx family in I2C mode */
|
|
/* u8x8_byte_SetDC is not used */
|
|
/* DC bit is encoded into the adr byte */
|
|
uint8_t u8x8_cad_uc16xx_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
static uint8_t in_transfer = 0;
|
|
static uint8_t is_data = 0;
|
|
uint8_t *p;
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_CAD_SEND_CMD:
|
|
case U8X8_MSG_CAD_SEND_ARG:
|
|
if ( in_transfer != 0 )
|
|
{
|
|
if ( is_data != 0 )
|
|
{
|
|
/* transfer mode is active, but data transfer */
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
/* clear the lowest two bits of the adr */
|
|
u8x8_SetI2CAddress( u8x8, u8x8_GetI2CAddress(u8x8)&0x0fc );
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* clear the lowest two bits of the adr */
|
|
u8x8_SetI2CAddress( u8x8, u8x8_GetI2CAddress(u8x8)&0x0fc );
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
}
|
|
u8x8_byte_SendByte(u8x8, arg_int);
|
|
in_transfer = 1;
|
|
break;
|
|
case U8X8_MSG_CAD_SEND_DATA:
|
|
if ( in_transfer != 0 )
|
|
{
|
|
if ( is_data == 0 )
|
|
{
|
|
/* transfer mode is active, but data transfer */
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
/* clear the lowest two bits of the adr */
|
|
u8x8_SetI2CAddress( u8x8, (u8x8_GetI2CAddress(u8x8)&0x0fc)|2 );
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* clear the lowest two bits of the adr */
|
|
u8x8_SetI2CAddress( u8x8, (u8x8_GetI2CAddress(u8x8)&0x0fc)|2 );
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
}
|
|
in_transfer = 1;
|
|
|
|
p = arg_ptr;
|
|
while( arg_int > 24 )
|
|
{
|
|
u8x8->byte_cb(u8x8, U8X8_MSG_CAD_SEND_DATA, 24, p);
|
|
arg_int-=24;
|
|
p+=24;
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
u8x8_byte_StartTransfer(u8x8);
|
|
}
|
|
u8x8->byte_cb(u8x8, U8X8_MSG_CAD_SEND_DATA, arg_int, p);
|
|
|
|
break;
|
|
case U8X8_MSG_CAD_INIT:
|
|
/* apply default i2c adr if required so that the start transfer msg can use this */
|
|
if ( u8x8->i2c_address == 255 )
|
|
u8x8->i2c_address = 0x070;
|
|
return u8x8->byte_cb(u8x8, msg, arg_int, arg_ptr);
|
|
case U8X8_MSG_CAD_START_TRANSFER:
|
|
in_transfer = 0;
|
|
/* actual start is delayed, because we do not whether this is data or cmd transfer */
|
|
break;
|
|
case U8X8_MSG_CAD_END_TRANSFER:
|
|
if ( in_transfer != 0 )
|
|
u8x8_byte_EndTransfer(u8x8);
|
|
in_transfer = 0;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|