mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-24 03:33:08 +00:00
8073992925
* RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
175 lines
5.5 KiB
C
175 lines
5.5 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file : main.h
|
|
* @brief : Header for main.c file.
|
|
* This file contains the common defines of the application.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2021 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under Ultimate Liberty license
|
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
|
* the License. You may obtain a copy of the License at:
|
|
* www.st.com/SLA0044
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __MAIN_H
|
|
#define __MAIN_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32wbxx_hal.h"
|
|
|
|
#include "stm32wbxx_ll_i2c.h"
|
|
#include "stm32wbxx_ll_crs.h"
|
|
#include "stm32wbxx_ll_rcc.h"
|
|
#include "stm32wbxx_ll_bus.h"
|
|
#include "stm32wbxx_ll_system.h"
|
|
#include "stm32wbxx_ll_exti.h"
|
|
#include "stm32wbxx_ll_cortex.h"
|
|
#include "stm32wbxx_ll_utils.h"
|
|
#include "stm32wbxx_ll_pwr.h"
|
|
#include "stm32wbxx_ll_dma.h"
|
|
#include "stm32wbxx_ll_usart.h"
|
|
#include "stm32wbxx_ll_gpio.h"
|
|
|
|
/* Private includes ----------------------------------------------------------*/
|
|
/* USER CODE BEGIN Includes */
|
|
|
|
/* USER CODE END Includes */
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/* USER CODE BEGIN ET */
|
|
|
|
/* USER CODE END ET */
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/* USER CODE BEGIN EC */
|
|
|
|
/* USER CODE END EC */
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/* USER CODE BEGIN EM */
|
|
|
|
/* USER CODE END EM */
|
|
|
|
/* Exported functions prototypes ---------------------------------------------*/
|
|
void Error_Handler(void);
|
|
|
|
/* USER CODE BEGIN EFP */
|
|
|
|
/* USER CODE END EFP */
|
|
|
|
/* Private defines -----------------------------------------------------------*/
|
|
#define BUTTON_BACK_Pin GPIO_PIN_13
|
|
#define BUTTON_BACK_GPIO_Port GPIOC
|
|
#define BUTTON_BACK_EXTI_IRQn EXTI15_10_IRQn
|
|
#define QUARTZ_32MHZ_IN_Pin GPIO_PIN_14
|
|
#define QUARTZ_32MHZ_IN_GPIO_Port GPIOC
|
|
#define QUARTZ_32MHZ_OUT_Pin GPIO_PIN_15
|
|
#define QUARTZ_32MHZ_OUT_GPIO_Port GPIOC
|
|
#define BUTTON_OK_Pin GPIO_PIN_3
|
|
#define BUTTON_OK_GPIO_Port GPIOH
|
|
#define BUTTON_OK_EXTI_IRQn EXTI3_IRQn
|
|
#define SPEAKER_Pin GPIO_PIN_8
|
|
#define SPEAKER_GPIO_Port GPIOB
|
|
#define IR_TX_Pin GPIO_PIN_9
|
|
#define IR_TX_GPIO_Port GPIOB
|
|
#define PC0_Pin GPIO_PIN_0
|
|
#define PC0_GPIO_Port GPIOC
|
|
#define PC1_Pin GPIO_PIN_1
|
|
#define PC1_GPIO_Port GPIOC
|
|
#define SPI_D_MISO_Pin GPIO_PIN_2
|
|
#define SPI_D_MISO_GPIO_Port GPIOC
|
|
#define PC3_Pin GPIO_PIN_3
|
|
#define PC3_GPIO_Port GPIOC
|
|
#define IR_RX_Pin GPIO_PIN_0
|
|
#define IR_RX_GPIO_Port GPIOA
|
|
#define CC1101_G0_Pin GPIO_PIN_1
|
|
#define CC1101_G0_GPIO_Port GPIOA
|
|
#define RFID_PULL_Pin GPIO_PIN_2
|
|
#define RFID_PULL_GPIO_Port GPIOA
|
|
#define PERIPH_POWER_Pin GPIO_PIN_3
|
|
#define PERIPH_POWER_GPIO_Port GPIOA
|
|
#define PA4_Pin GPIO_PIN_4
|
|
#define PA4_GPIO_Port GPIOA
|
|
#define SPI_R_SCK_Pin GPIO_PIN_5
|
|
#define SPI_R_SCK_GPIO_Port GPIOA
|
|
#define PA6_Pin GPIO_PIN_6
|
|
#define PA6_GPIO_Port GPIOA
|
|
#define PA7_Pin GPIO_PIN_7
|
|
#define PA7_GPIO_Port GPIOA
|
|
#define RFID_TUNE_Pin GPIO_PIN_8
|
|
#define RFID_TUNE_GPIO_Port GPIOA
|
|
#define I2C_SCL_Pin GPIO_PIN_9
|
|
#define I2C_SCL_GPIO_Port GPIOA
|
|
#define RF_SW_0_Pin GPIO_PIN_4
|
|
#define RF_SW_0_GPIO_Port GPIOC
|
|
#define RFID_RF_IN_Pin GPIO_PIN_5
|
|
#define RFID_RF_IN_GPIO_Port GPIOC
|
|
#define PB2_Pin GPIO_PIN_2
|
|
#define PB2_GPIO_Port GPIOB
|
|
#define BUTTON_UP_Pin GPIO_PIN_10
|
|
#define BUTTON_UP_GPIO_Port GPIOB
|
|
#define BUTTON_UP_EXTI_IRQn EXTI15_10_IRQn
|
|
#define BUTTON_LEFT_Pin GPIO_PIN_11
|
|
#define BUTTON_LEFT_GPIO_Port GPIOB
|
|
#define BUTTON_LEFT_EXTI_IRQn EXTI15_10_IRQn
|
|
#define DISPLAY_RST_Pin GPIO_PIN_0
|
|
#define DISPLAY_RST_GPIO_Port GPIOB
|
|
#define DISPLAY_DI_Pin GPIO_PIN_1
|
|
#define DISPLAY_DI_GPIO_Port GPIOB
|
|
#define NFC_CS_Pin GPIO_PIN_4
|
|
#define NFC_CS_GPIO_Port GPIOE
|
|
#define BUTTON_RIGHT_Pin GPIO_PIN_12
|
|
#define BUTTON_RIGHT_GPIO_Port GPIOB
|
|
#define BUTTON_RIGHT_EXTI_IRQn EXTI15_10_IRQn
|
|
#define RFID_OUT_Pin GPIO_PIN_13
|
|
#define RFID_OUT_GPIO_Port GPIOB
|
|
#define iBTN_Pin GPIO_PIN_14
|
|
#define iBTN_GPIO_Port GPIOB
|
|
#define SPI_D_MOSI_Pin GPIO_PIN_15
|
|
#define SPI_D_MOSI_GPIO_Port GPIOB
|
|
#define BUTTON_DOWN_Pin GPIO_PIN_6
|
|
#define BUTTON_DOWN_GPIO_Port GPIOC
|
|
#define I2C_SDA_Pin GPIO_PIN_10
|
|
#define I2C_SDA_GPIO_Port GPIOA
|
|
#define VIBRO_Pin GPIO_PIN_15
|
|
#define VIBRO_GPIO_Port GPIOA
|
|
#define SD_CD_Pin GPIO_PIN_10
|
|
#define SD_CD_GPIO_Port GPIOC
|
|
#define DISPLAY_CS_Pin GPIO_PIN_11
|
|
#define DISPLAY_CS_GPIO_Port GPIOC
|
|
#define SD_CS_Pin GPIO_PIN_12
|
|
#define SD_CS_GPIO_Port GPIOC
|
|
#define CC1101_CS_Pin GPIO_PIN_0
|
|
#define CC1101_CS_GPIO_Port GPIOD
|
|
#define SPI_D_SCK_Pin GPIO_PIN_1
|
|
#define SPI_D_SCK_GPIO_Port GPIOD
|
|
#define PB3_Pin GPIO_PIN_3
|
|
#define PB3_GPIO_Port GPIOB
|
|
#define SPI_R_MISO_Pin GPIO_PIN_4
|
|
#define SPI_R_MISO_GPIO_Port GPIOB
|
|
#define SPI_R_MOSI_Pin GPIO_PIN_5
|
|
#define SPI_R_MOSI_GPIO_Port GPIOB
|
|
/* USER CODE BEGIN Private defines */
|
|
|
|
/* USER CODE END Private defines */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __MAIN_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|