mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-23 19:23:09 +00:00
389ff92cc1
* Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
669 lines
25 KiB
C
669 lines
25 KiB
C
|
|
/******************************************************************************
|
|
* \attention
|
|
*
|
|
* <h2><center>© COPYRIGHT 2020 STMicroelectronics</center></h2>
|
|
*
|
|
* Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
|
|
* You may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* www.st.com/myliberty
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
|
|
* AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************/
|
|
|
|
/*
|
|
* PROJECT: ST25R3916 firmware
|
|
* Revision:
|
|
* LANGUAGE: ISO C99
|
|
*/
|
|
|
|
/*! \file
|
|
*
|
|
* \author Gustavo Patricio
|
|
*
|
|
* \brief ST25R3916 high level interface
|
|
*
|
|
*
|
|
* \addtogroup RFAL
|
|
* @{
|
|
*
|
|
* \addtogroup RFAL-HAL
|
|
* \brief RFAL Hardware Abstraction Layer
|
|
* @{
|
|
*
|
|
* \addtogroup ST25R3916
|
|
* \brief RFAL ST25R3916 Driver
|
|
* @{
|
|
*
|
|
* \addtogroup ST25R3916_Driver
|
|
* \brief RFAL ST25R3916 Driver
|
|
* @{
|
|
*
|
|
*/
|
|
|
|
#ifndef ST25R3916_H
|
|
#define ST25R3916_H
|
|
|
|
/*
|
|
******************************************************************************
|
|
* INCLUDES
|
|
******************************************************************************
|
|
*/
|
|
#include "platform.h"
|
|
#include "st_errno.h"
|
|
#include "st25r3916_com.h"
|
|
|
|
/*
|
|
******************************************************************************
|
|
* GLOBAL DATATYPES
|
|
******************************************************************************
|
|
*/
|
|
|
|
/*! Struct to represent all regs on ST25R3916 */
|
|
typedef struct {
|
|
uint8_t RsA[(
|
|
ST25R3916_REG_IC_IDENTITY + 1U)]; /*!< Registers contained on ST25R3916 space A (Rs-A) */
|
|
uint8_t
|
|
RsB[ST25R3916_SPACE_B_REG_LEN]; /*!< Registers contained on ST25R3916 space B (Rs-B) */
|
|
} t_st25r3916Regs;
|
|
|
|
/*! Parameters how the stream mode should work */
|
|
struct st25r3916StreamConfig {
|
|
uint8_t useBPSK; /*!< 0: subcarrier, 1:BPSK */
|
|
uint8_t din; /*!< Divider for the in subcarrier frequency: fc/2^din */
|
|
uint8_t dout; /*!< Divider for the in subcarrier frequency fc/2^dout */
|
|
uint8_t report_period_length; /*!< Length of the reporting period 2^report_period_length*/
|
|
};
|
|
|
|
/*
|
|
******************************************************************************
|
|
* GLOBAL DEFINES
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* ST25R3916 direct commands */
|
|
#define ST25R3916_CMD_SET_DEFAULT \
|
|
0xC1U /*!< Puts the chip in default state (same as after power-up) */
|
|
#define ST25R3916_CMD_STOP 0xC2U /*!< Stops all activities and clears FIFO */
|
|
#define ST25R3916_CMD_TRANSMIT_WITH_CRC \
|
|
0xC4U /*!< Transmit with CRC */
|
|
#define ST25R3916_CMD_TRANSMIT_WITHOUT_CRC \
|
|
0xC5U /*!< Transmit without CRC */
|
|
#define ST25R3916_CMD_TRANSMIT_REQA \
|
|
0xC6U /*!< Transmit REQA */
|
|
#define ST25R3916_CMD_TRANSMIT_WUPA \
|
|
0xC7U /*!< Transmit WUPA */
|
|
#define ST25R3916_CMD_INITIAL_RF_COLLISION \
|
|
0xC8U /*!< NFC transmit with Initial RF Collision Avoidance */
|
|
#define ST25R3916_CMD_RESPONSE_RF_COLLISION_N \
|
|
0xC9U /*!< NFC transmit with Response RF Collision Avoidance */
|
|
#define ST25R3916_CMD_GOTO_SENSE \
|
|
0xCDU /*!< Passive target logic to Sense/Idle state */
|
|
#define ST25R3916_CMD_GOTO_SLEEP \
|
|
0xCEU /*!< Passive target logic to Sleep/Halt state */
|
|
#define ST25R3916_CMD_MASK_RECEIVE_DATA \
|
|
0xD0U /*!< Mask receive data */
|
|
#define ST25R3916_CMD_UNMASK_RECEIVE_DATA \
|
|
0xD1U /*!< Unmask receive data */
|
|
#define ST25R3916_CMD_AM_MOD_STATE_CHANGE \
|
|
0xD2U /*!< AM Modulation state change */
|
|
#define ST25R3916_CMD_MEASURE_AMPLITUDE \
|
|
0xD3U /*!< Measure singal amplitude on RFI inputs */
|
|
#define ST25R3916_CMD_RESET_RXGAIN \
|
|
0xD5U /*!< Reset RX Gain */
|
|
#define ST25R3916_CMD_ADJUST_REGULATORS \
|
|
0xD6U /*!< Adjust regulators */
|
|
#define ST25R3916_CMD_CALIBRATE_DRIVER_TIMING \
|
|
0xD8U /*!< Starts the sequence to adjust the driver timing */
|
|
#define ST25R3916_CMD_MEASURE_PHASE \
|
|
0xD9U /*!< Measure phase between RFO and RFI signal */
|
|
#define ST25R3916_CMD_CLEAR_RSSI \
|
|
0xDAU /*!< Clear RSSI bits and restart the measurement */
|
|
#define ST25R3916_CMD_CLEAR_FIFO \
|
|
0xDBU /*!< Clears FIFO, Collision and IRQ status */
|
|
#define ST25R3916_CMD_TRANSPARENT_MODE \
|
|
0xDCU /*!< Transparent mode */
|
|
#define ST25R3916_CMD_CALIBRATE_C_SENSOR \
|
|
0xDDU /*!< Calibrate the capacitive sensor */
|
|
#define ST25R3916_CMD_MEASURE_CAPACITANCE \
|
|
0xDEU /*!< Measure capacitance */
|
|
#define ST25R3916_CMD_MEASURE_VDD \
|
|
0xDFU /*!< Measure power supply voltage */
|
|
#define ST25R3916_CMD_START_GP_TIMER \
|
|
0xE0U /*!< Start the general purpose timer */
|
|
#define ST25R3916_CMD_START_WUP_TIMER \
|
|
0xE1U /*!< Start the wake-up timer */
|
|
#define ST25R3916_CMD_START_MASK_RECEIVE_TIMER \
|
|
0xE2U /*!< Start the mask-receive timer */
|
|
#define ST25R3916_CMD_START_NO_RESPONSE_TIMER \
|
|
0xE3U /*!< Start the no-response timer */
|
|
#define ST25R3916_CMD_START_PPON2_TIMER \
|
|
0xE4U /*!< Start PPon2 timer */
|
|
#define ST25R3916_CMD_STOP_NRT \
|
|
0xE8U /*!< Stop No Response Timer */
|
|
#define ST25R3916_CMD_SPACE_B_ACCESS \
|
|
0xFBU /*!< Enable R/W access to the test registers */
|
|
#define ST25R3916_CMD_TEST_ACCESS \
|
|
0xFCU /*!< Enable R/W access to the test registers */
|
|
|
|
#define ST25R3916_THRESHOLD_DO_NOT_SET \
|
|
0xFFU /*!< Indicates not to change this Threshold */
|
|
|
|
#define ST25R3916_BR_DO_NOT_SET \
|
|
0xFFU /*!< Indicates not to change this Bit Rate */
|
|
#define ST25R3916_BR_106 0x00U /*!< ST25R3916 Bit Rate 106 kbit/s (fc/128) */
|
|
#define ST25R3916_BR_212 0x01U /*!< ST25R3916 Bit Rate 212 kbit/s (fc/64) */
|
|
#define ST25R3916_BR_424 0x02U /*!< ST25R3916 Bit Rate 424 kbit/s (fc/32) */
|
|
#define ST25R3916_BR_848 0x03U /*!< ST25R3916 Bit Rate 848 kbit/s (fc/16) */
|
|
#define ST25R3916_BR_1695 0x04U /*!< ST25R3916 Bit Rate 1696 kbit/s (fc/8) */
|
|
#define ST25R3916_BR_3390 0x05U /*!< ST25R3916 Bit Rate 3390 kbit/s (fc/4) */
|
|
#define ST25R3916_BR_6780 0x07U /*!< ST25R3916 Bit Rate 6780 kbit/s (fc/2) */
|
|
|
|
#define ST25R3916_FIFO_DEPTH 512U /*!< Depth of FIFO */
|
|
#define ST25R3916_TOUT_OSC_STABLE \
|
|
10U /*!< Max timeout for Oscillator to get stable DS: 700us */
|
|
|
|
/*
|
|
******************************************************************************
|
|
* GLOBAL MACROS
|
|
******************************************************************************
|
|
*/
|
|
|
|
/*! Enables the Transmitter (Field On) and Receiver */
|
|
#define st25r3916TxRxOn() \
|
|
st25r3916SetRegisterBits( \
|
|
ST25R3916_REG_OP_CONTROL, \
|
|
(ST25R3916_REG_OP_CONTROL_rx_en | ST25R3916_REG_OP_CONTROL_tx_en))
|
|
|
|
/*! Disables the Transmitter (Field Off) and Receiver */
|
|
#define st25r3916TxRxOff() \
|
|
st25r3916ClrRegisterBits( \
|
|
ST25R3916_REG_OP_CONTROL, \
|
|
(ST25R3916_REG_OP_CONTROL_rx_en | ST25R3916_REG_OP_CONTROL_tx_en))
|
|
|
|
/*! Disables the Transmitter (Field Off) */
|
|
#define st25r3916TxOff() \
|
|
st25r3916ClrRegisterBits(ST25R3916_REG_OP_CONTROL, ST25R3916_REG_OP_CONTROL_tx_en)
|
|
|
|
/*! Checks if General Purpose Timer is still running by reading gpt_on flag */
|
|
#define st25r3916IsGPTRunning() \
|
|
st25r3916CheckReg( \
|
|
ST25R3916_REG_NFCIP1_BIT_RATE, \
|
|
ST25R3916_REG_NFCIP1_BIT_RATE_gpt_on, \
|
|
ST25R3916_REG_NFCIP1_BIT_RATE_gpt_on)
|
|
|
|
/*! Checks if External Filed is detected by reading ST25R3916 External Field Detector output */
|
|
#define st25r3916IsExtFieldOn() \
|
|
st25r3916CheckReg( \
|
|
ST25R3916_REG_AUX_DISPLAY, \
|
|
ST25R3916_REG_AUX_DISPLAY_efd_o, \
|
|
ST25R3916_REG_AUX_DISPLAY_efd_o)
|
|
|
|
/*! Checks if Transmitter is enabled (Field On) */
|
|
#define st25r3916IsTxEnabled() \
|
|
st25r3916CheckReg( \
|
|
ST25R3916_REG_OP_CONTROL, ST25R3916_REG_OP_CONTROL_tx_en, ST25R3916_REG_OP_CONTROL_tx_en)
|
|
|
|
/*! Checks if NRT is in EMV mode */
|
|
#define st25r3916IsNRTinEMV() \
|
|
st25r3916CheckReg( \
|
|
ST25R3916_REG_TIMER_EMV_CONTROL, \
|
|
ST25R3916_REG_TIMER_EMV_CONTROL_nrt_emv, \
|
|
ST25R3916_REG_TIMER_EMV_CONTROL_nrt_emv_on)
|
|
|
|
/*! Checks if last FIFO byte is complete */
|
|
#define st25r3916IsLastFIFOComplete() \
|
|
st25r3916CheckReg(ST25R3916_REG_FIFO_STATUS2, ST25R3916_REG_FIFO_STATUS2_fifo_lb_mask, 0)
|
|
|
|
/*! Checks if the Oscillator is enabled */
|
|
#define st25r3916IsOscOn() \
|
|
st25r3916CheckReg( \
|
|
ST25R3916_REG_OP_CONTROL, ST25R3916_REG_OP_CONTROL_en, ST25R3916_REG_OP_CONTROL_en)
|
|
|
|
/*
|
|
******************************************************************************
|
|
* GLOBAL FUNCTION PROTOTYPES
|
|
******************************************************************************
|
|
*/
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Initialise ST25R3916 driver
|
|
*
|
|
* This function initialises the ST25R3916 driver.
|
|
*
|
|
* \return ERR_NONE : Operation successful
|
|
* \return ERR_HW_MISMATCH : Expected HW do not match or communication error
|
|
* \return ERR_IO : Error during communication selftest. Check communication interface
|
|
* \return ERR_TIMEOUT : Timeout during IRQ selftest. Check IRQ handling
|
|
* \return ERR_SYSTEM : Failure during oscillator activation or timer error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916Initialize(void);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Deinitialize ST25R3916 driver
|
|
*
|
|
* Calling this function deinitializes the ST25R3916 driver.
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
void st25r3916Deinitialize(void);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Turn on Oscillator and Regulator
|
|
*
|
|
* This function turn on oscillator and regulator and waits for the
|
|
* oscillator to become stable
|
|
*
|
|
* \return ERR_SYSTEM : Failure dusring Oscillator activation
|
|
* \return ERR_NONE : No error, Oscillator is active and stable, Regulator is on
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916OscOn(void);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Sets the bitrate
|
|
*
|
|
* This function sets the bitrates for rx and tx
|
|
*
|
|
* \param txrate : speed is 2^txrate * 106 kb/s
|
|
* 0xff : don't set txrate (ST25R3916_BR_DO_NOT_SET)
|
|
* \param rxrate : speed is 2^rxrate * 106 kb/s
|
|
* 0xff : don't set rxrate (ST25R3916_BR_DO_NOT_SET)
|
|
*
|
|
* \return ERR_PARAM: At least one bit rate was invalid
|
|
* \return ERR_NONE : No error, both bit rates were set
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916SetBitrate(uint8_t txrate, uint8_t rxrate);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Adjusts supply regulators according to the current supply voltage
|
|
*
|
|
* This function the power level is measured in maximum load conditions and
|
|
* the regulated voltage reference is set to 250mV below this level.
|
|
* Execution of this function lasts arround 5ms.
|
|
*
|
|
* The regulated voltages will be set to the result of Adjust Regulators
|
|
*
|
|
* \param [out] result_mV : Result of calibration in milliVolts
|
|
*
|
|
* \return ERR_IO : Error during communication with ST25R3916
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916AdjustRegulators(uint16_t* result_mV);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Measure Amplitude
|
|
*
|
|
* This function measured the amplitude on the RFI inputs and stores the
|
|
* result in parameter \a result.
|
|
*
|
|
* \param[out] result: result of RF measurement.
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916MeasureAmplitude(uint8_t* result);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Measure Power Supply
|
|
*
|
|
* This function executes Measure Power Supply and returns the raw value
|
|
*
|
|
* \param[in] mpsv : one of ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd
|
|
* ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd_rf
|
|
* ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd_a
|
|
* ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd_d
|
|
* ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd_am
|
|
*
|
|
* \return the measured voltage in raw format.
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
uint8_t st25r3916MeasurePowerSupply(uint8_t mpsv);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Measure Voltage
|
|
*
|
|
* This function measures the voltage on one of VDD and VDD_* and returns
|
|
* the result in mV
|
|
*
|
|
* \param[in] mpsv : one of ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd
|
|
* ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd_rf
|
|
* ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd_a
|
|
* ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd_d
|
|
* or ST25R3916_REG_REGULATOR_CONTROL_mpsv_vdd_am
|
|
*
|
|
* \return the measured voltage in mV
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
uint16_t st25r3916MeasureVoltage(uint8_t mpsv);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Measure Phase
|
|
*
|
|
* This function performs a Phase measurement.
|
|
* The result is stored in the \a result parameter.
|
|
*
|
|
* \param[out] result: 8 bit long result of the measurement.
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916MeasurePhase(uint8_t* result);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Measure Capacitance
|
|
*
|
|
* This function performs the capacitance measurement and stores the
|
|
* result in parameter \a result.
|
|
*
|
|
* \param[out] result: 8 bit long result of RF measurement.
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916MeasureCapacitance(uint8_t* result);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Calibrates Capacitive Sensor
|
|
*
|
|
* This function performs automatic calibration of the capacitive sensor
|
|
* and stores the result in parameter \a result.
|
|
*
|
|
* \warning To avoid interference with Xtal oscillator and reader magnetic
|
|
* field, it is strongly recommended to perform calibration
|
|
* in Power-down mode only.
|
|
* This method does not modify the Oscillator nor transmitter state,
|
|
* these should be configured before by user.
|
|
*
|
|
* \param[out] result: 5 bit long result of the calibration.
|
|
* Binary weighted, step 0.1 pF, max 3.1 pF
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_IO : The calibration was not successful
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916CalibrateCapacitiveSensor(uint8_t* result);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Get NRT time
|
|
*
|
|
* This returns the last value set on the NRT
|
|
*
|
|
* \warning it does not read chip register, just the sw var that contains the
|
|
* last value set before
|
|
*
|
|
* \return the value of the NRT in 64/fc
|
|
*/
|
|
uint32_t st25r3916GetNoResponseTime(void);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Set NRT time
|
|
*
|
|
* This function sets the No Response Time with the given value
|
|
*
|
|
* \param [in] nrt_64fcs : no response time in steps of 64/fc (4.72us)
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter (time is too large)
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916SetNoResponseTime(uint32_t nrt_64fcs);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Set and Start NRT
|
|
*
|
|
* This function sets the No Response Time with the given value and
|
|
* immediately starts it
|
|
* Used when needs to add more time before timeout without performing Tx
|
|
*
|
|
* \param [in] nrt_64fcs : no response time in steps of 64/fc (4.72us)
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916SetStartNoResponseTimer(uint32_t nrt_64fcs);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Set GPT time
|
|
*
|
|
* This function sets the General Purpose Timer time registers
|
|
*
|
|
* \param [in] gpt_8fcs : general purpose timer timeout in steps of 8/fc (590ns)
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
void st25r3916SetGPTime(uint16_t gpt_8fcs);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Set and Start GPT
|
|
*
|
|
* This function sets the General Purpose Timer with the given timeout and
|
|
* immediately starts it ONLY if the trigger source is not set to none.
|
|
*
|
|
* \param [in] gpt_8fcs : general purpose timer timeout in steps of8/fc (590ns)
|
|
* \param [in] trigger_source : no trigger, start of Rx, end of Rx, end of Tx in NFC mode
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916SetStartGPTimer(uint16_t gpt_8fcs, uint8_t trigger_source);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Sets the number Tx Bits
|
|
*
|
|
* Sets ST25R3916 internal registers with correct number of complete bytes and
|
|
* bits to be sent
|
|
*
|
|
* \param [in] nBits : number of bits to be set/transmitted
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
void st25r3916SetNumTxBits(uint16_t nBits);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Get amount of bytes in FIFO
|
|
*
|
|
* Gets the number of bytes currently in the FIFO
|
|
*
|
|
* \return the number of bytes currently in the FIFO
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
uint16_t st25r3916GetNumFIFOBytes(void);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Get amount of bits of the last FIFO byte if incomplete
|
|
*
|
|
* Gets the number of bits of the last FIFO byte if incomplete
|
|
*
|
|
* \return the number of bits of the last FIFO byte if incomplete, 0 if
|
|
* the last byte is complete
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
uint8_t st25r3916GetNumFIFOLastBits(void);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Perform Collision Avoidance
|
|
*
|
|
* Performs Collision Avoidance with the given threshold and with the
|
|
* n number of TRFW
|
|
*
|
|
* \param[in] FieldONCmd : Field ON command to be executed ST25R3916_CMD_INITIAL_RF_COLLISION
|
|
* or ST25R3916_CMD_RESPONSE_RF_COLLISION_N
|
|
* \param[in] pdThreshold : Peer Detection Threshold (ST25R3916_REG_FIELD_THRESHOLD_trg_xx)
|
|
* 0xff : don't set Threshold (ST25R3916_THRESHOLD_DO_NOT_SET)
|
|
* \param[in] caThreshold : Collision Avoidance Threshold (ST25R3916_REG_FIELD_THRESHOLD_rfe_xx)
|
|
* 0xff : don't set Threshold (ST25R3916_THRESHOLD_DO_NOT_SET)
|
|
* \param[in] nTRFW : Number of TRFW
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_RF_COLLISION : Collision detected
|
|
* \return ERR_NONE : No collision detected
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916PerformCollisionAvoidance(
|
|
uint8_t FieldONCmd,
|
|
uint8_t pdThreshold,
|
|
uint8_t caThreshold,
|
|
uint8_t nTRFW);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Check Identity
|
|
*
|
|
* Checks if the chip ID is as expected.
|
|
*
|
|
* 5 bit IC type code for ST25R3916: 00101
|
|
* The 3 lsb contain the IC revision code
|
|
*
|
|
* \param[out] rev : the IC revision code
|
|
*
|
|
* \return true when IC type is as expected
|
|
* \return false otherwise
|
|
*/
|
|
bool st25r3916CheckChipID(uint8_t* rev);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Retrieves all internal registers from ST25R3916
|
|
*
|
|
* \param[out] regDump : pointer to the struct/buffer where the reg dump
|
|
* will be written
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_NONE : No error
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916GetRegsDump(t_st25r3916Regs* regDump);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Check if command is valid
|
|
*
|
|
* Checks if the given command is a valid ST25R3916 command
|
|
*
|
|
* \param[in] cmd: Command to check
|
|
*
|
|
* \return true if is a valid command
|
|
* \return false otherwise
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
bool st25r3916IsCmdValid(uint8_t cmd);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Configure the stream mode of ST25R3916
|
|
*
|
|
* This function initializes the stream with the given parameters
|
|
*
|
|
* \param[in] config : all settings for bitrates, type, etc.
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_NONE : No error, stream mode driver initialized
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916StreamConfigure(const struct st25r3916StreamConfig* config);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Executes a direct command and returns the result
|
|
*
|
|
* This function executes the direct command given by \a cmd waits for
|
|
* \a sleeptime for I_dct and returns the result read from register \a resreg.
|
|
* The value of cmd is not checked.
|
|
*
|
|
* \param[in] cmd : direct command to execute
|
|
* \param[in] resReg: address of the register containing the result
|
|
* \param[in] tout : time in milliseconds to wait before reading the result
|
|
* \param[out] result: result
|
|
*
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode
|
|
st25r3916ExecuteCommandAndGetResult(uint8_t cmd, uint8_t resReg, uint8_t tout, uint8_t* result);
|
|
|
|
/*!
|
|
*****************************************************************************
|
|
* \brief Gets the RSSI values
|
|
*
|
|
* This function gets the RSSI value of the previous reception taking into
|
|
* account the gain reductions that were used.
|
|
* RSSI value for both AM and PM channel can be retrieved.
|
|
*
|
|
* \param[out] amRssi: the RSSI on the AM channel expressed in mV
|
|
* \param[out] pmRssi: the RSSI on the PM channel expressed in mV
|
|
*
|
|
* \return ERR_PARAM : Invalid parameter
|
|
* \return ERR_NONE : No error
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
ReturnCode st25r3916GetRSSI(uint16_t* amRssi, uint16_t* pmRssi);
|
|
#endif /* ST25R3916_H */
|
|
|
|
/**
|
|
* @}
|
|
*
|
|
* @}
|
|
*
|
|
* @}
|
|
*
|
|
* @}
|
|
*/
|