mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-25 12:13:08 +00:00
e12958d408
* WS: add protocol LaCrosse-TX (TFA Dostmann) * WS: fix syntax * WS: fix MSG_TYPE * WS: fix PVS Co-authored-by: あく <alleteam@gmail.com>
329 lines
13 KiB
C
329 lines
13 KiB
C
#include "lacrosse_tx.h"
|
|
|
|
#define TAG "WSProtocolLaCrosse_TX"
|
|
|
|
/*
|
|
* Help
|
|
* https://github.com/merbanan/rtl_433/blob/master/src/devices/lacrosse.c
|
|
*
|
|
*
|
|
* LaCrosse TX 433 Mhz Temperature and Humidity Sensors.
|
|
* - Tested: TX-7U and TX-6U (Temperature only)
|
|
* - Not Tested but should work: TX-3, TX-4
|
|
* - also TFA Dostmann 30.3120.90 sensor (for e.g. 35.1018.06 (WS-9015) station)
|
|
* - also TFA Dostmann 30.3121 sensor
|
|
* Protocol Documentation: http://www.f6fbb.org/domo/sensors/tx3_th.php
|
|
* Message is 44 bits, 11 x 4 bit nybbles:
|
|
* [00] [cnt = 10] [type] [addr] [addr + parity] [v1] [v2] [v3] [iv1] [iv2] [check]
|
|
* Notes:
|
|
* - Zero Pulses are longer (1,400 uS High, 1,000 uS Low) = 2,400 uS
|
|
* - One Pulses are shorter ( 550 uS High, 1,000 uS Low) = 1,600 uS
|
|
* - Sensor id changes when the battery is changed
|
|
* - Primary Value are BCD with one decimal place: vvv = 12.3
|
|
* - Secondary value is integer only intval = 12, seems to be a repeat of primary
|
|
* This may actually be an additional data check because the 4 bit checksum
|
|
* and parity bit is pretty week at detecting errors.
|
|
* - Temperature is in Celsius with 50.0 added (to handle negative values)
|
|
* - Humidity values appear to be integer precision, decimal always 0.
|
|
* - There is a 4 bit checksum and a parity bit covering the three digit value
|
|
* - Parity check for TX-3 and TX-4 might be different.
|
|
* - Msg sent with one repeat after 30 mS
|
|
* - Temperature and humidity are sent as separate messages
|
|
* - Frequency for each sensor may be could be off by as much as 50-75 khz
|
|
* - LaCrosse Sensors in other frequency ranges (915 Mhz) use FSK not OOK
|
|
* so they can't be decoded by rtl_433 currently.
|
|
* - Temperature and Humidity are sent in different messages bursts.
|
|
*/
|
|
|
|
#define LACROSSE_TX_GAP 1000
|
|
#define LACROSSE_TX_BIT_SIZE 44
|
|
#define LACROSSE_TX_SUNC_PATTERN 0x0A000000000
|
|
#define LACROSSE_TX_SUNC_MASK 0x0F000000000
|
|
#define LACROSSE_TX_MSG_TYPE_TEMP 0x00
|
|
#define LACROSSE_TX_MSG_TYPE_HUM 0x0E
|
|
|
|
static const SubGhzBlockConst ws_protocol_lacrosse_tx_const = {
|
|
.te_short = 550,
|
|
.te_long = 1300,
|
|
.te_delta = 120,
|
|
.min_count_bit_for_found = 40,
|
|
};
|
|
|
|
struct WSProtocolDecoderLaCrosse_TX {
|
|
SubGhzProtocolDecoderBase base;
|
|
|
|
SubGhzBlockDecoder decoder;
|
|
WSBlockGeneric generic;
|
|
|
|
uint16_t header_count;
|
|
};
|
|
|
|
struct WSProtocolEncoderLaCrosse_TX {
|
|
SubGhzProtocolEncoderBase base;
|
|
|
|
SubGhzProtocolBlockEncoder encoder;
|
|
WSBlockGeneric generic;
|
|
};
|
|
|
|
typedef enum {
|
|
LaCrosse_TXDecoderStepReset = 0,
|
|
LaCrosse_TXDecoderStepCheckPreambule,
|
|
LaCrosse_TXDecoderStepSaveDuration,
|
|
LaCrosse_TXDecoderStepCheckDuration,
|
|
} LaCrosse_TXDecoderStep;
|
|
|
|
const SubGhzProtocolDecoder ws_protocol_lacrosse_tx_decoder = {
|
|
.alloc = ws_protocol_decoder_lacrosse_tx_alloc,
|
|
.free = ws_protocol_decoder_lacrosse_tx_free,
|
|
|
|
.feed = ws_protocol_decoder_lacrosse_tx_feed,
|
|
.reset = ws_protocol_decoder_lacrosse_tx_reset,
|
|
|
|
.get_hash_data = ws_protocol_decoder_lacrosse_tx_get_hash_data,
|
|
.serialize = ws_protocol_decoder_lacrosse_tx_serialize,
|
|
.deserialize = ws_protocol_decoder_lacrosse_tx_deserialize,
|
|
.get_string = ws_protocol_decoder_lacrosse_tx_get_string,
|
|
};
|
|
|
|
const SubGhzProtocolEncoder ws_protocol_lacrosse_tx_encoder = {
|
|
.alloc = NULL,
|
|
.free = NULL,
|
|
|
|
.deserialize = NULL,
|
|
.stop = NULL,
|
|
.yield = NULL,
|
|
};
|
|
|
|
const SubGhzProtocol ws_protocol_lacrosse_tx = {
|
|
.name = WS_PROTOCOL_LACROSSE_TX_NAME,
|
|
.type = SubGhzProtocolWeatherStation,
|
|
.flag = SubGhzProtocolFlag_433 | SubGhzProtocolFlag_315 | SubGhzProtocolFlag_868 |
|
|
SubGhzProtocolFlag_AM | SubGhzProtocolFlag_Decodable,
|
|
|
|
.decoder = &ws_protocol_lacrosse_tx_decoder,
|
|
.encoder = &ws_protocol_lacrosse_tx_encoder,
|
|
};
|
|
|
|
void* ws_protocol_decoder_lacrosse_tx_alloc(SubGhzEnvironment* environment) {
|
|
UNUSED(environment);
|
|
WSProtocolDecoderLaCrosse_TX* instance = malloc(sizeof(WSProtocolDecoderLaCrosse_TX));
|
|
instance->base.protocol = &ws_protocol_lacrosse_tx;
|
|
instance->generic.protocol_name = instance->base.protocol->name;
|
|
return instance;
|
|
}
|
|
|
|
void ws_protocol_decoder_lacrosse_tx_free(void* context) {
|
|
furi_assert(context);
|
|
WSProtocolDecoderLaCrosse_TX* instance = context;
|
|
free(instance);
|
|
}
|
|
|
|
void ws_protocol_decoder_lacrosse_tx_reset(void* context) {
|
|
furi_assert(context);
|
|
WSProtocolDecoderLaCrosse_TX* instance = context;
|
|
instance->header_count = 0;
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepReset;
|
|
}
|
|
|
|
static bool ws_protocol_lacrosse_tx_check_crc(WSProtocolDecoderLaCrosse_TX* instance) {
|
|
if(!instance->decoder.decode_data) return false;
|
|
uint8_t msg[] = {
|
|
(instance->decoder.decode_data >> 36) & 0x0F,
|
|
(instance->decoder.decode_data >> 32) & 0x0F,
|
|
(instance->decoder.decode_data >> 28) & 0x0F,
|
|
(instance->decoder.decode_data >> 24) & 0x0F,
|
|
(instance->decoder.decode_data >> 20) & 0x0F,
|
|
(instance->decoder.decode_data >> 16) & 0x0F,
|
|
(instance->decoder.decode_data >> 12) & 0x0F,
|
|
(instance->decoder.decode_data >> 8) & 0x0F,
|
|
(instance->decoder.decode_data >> 4) & 0x0F};
|
|
|
|
uint8_t crc = subghz_protocol_blocks_add_bytes(msg, 9);
|
|
return ((crc & 0x0F) == ((instance->decoder.decode_data) & 0x0F));
|
|
}
|
|
|
|
/**
|
|
* Analysis of received data
|
|
* @param instance Pointer to a WSBlockGeneric* instance
|
|
*/
|
|
static void ws_protocol_lacrosse_tx_remote_controller(WSBlockGeneric* instance) {
|
|
uint8_t msg_type = (instance->data >> 32) & 0x0F;
|
|
instance->id = (((instance->data >> 28) & 0x0F) << 3) | (((instance->data >> 24) & 0x0F) >> 1);
|
|
|
|
float msg_value = (float)((instance->data >> 20) & 0x0F) * 10.0f +
|
|
(float)((instance->data >> 16) & 0x0F) +
|
|
(float)((instance->data >> 12) & 0x0F) * 0.1f;
|
|
|
|
if(msg_type == LACROSSE_TX_MSG_TYPE_TEMP) { //-V1051
|
|
instance->temp = msg_value - 50.0f;
|
|
instance->humidity = WS_NO_HUMIDITY;
|
|
} else if(msg_type == LACROSSE_TX_MSG_TYPE_HUM) {
|
|
//ToDo for verification, records are needed with sensors maintaining temperature and temperature for this standard
|
|
instance->humidity = (uint8_t)msg_value;
|
|
} else {
|
|
furi_crash("WS: WSProtocolLaCrosse_TX incorrect msg_type.");
|
|
}
|
|
|
|
instance->btn = WS_NO_BTN;
|
|
instance->battery_low = WS_NO_BATT;
|
|
instance->channel = WS_NO_CHANNEL;
|
|
}
|
|
|
|
void ws_protocol_decoder_lacrosse_tx_feed(void* context, bool level, uint32_t duration) {
|
|
furi_assert(context);
|
|
WSProtocolDecoderLaCrosse_TX* instance = context;
|
|
|
|
switch(instance->decoder.parser_step) {
|
|
case LaCrosse_TXDecoderStepReset:
|
|
if((!level) && (DURATION_DIFF(duration, LACROSSE_TX_GAP) <
|
|
ws_protocol_lacrosse_tx_const.te_delta * 2)) {
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepCheckPreambule;
|
|
instance->header_count = 0;
|
|
}
|
|
break;
|
|
|
|
case LaCrosse_TXDecoderStepCheckPreambule:
|
|
|
|
if(level) {
|
|
if((DURATION_DIFF(duration, ws_protocol_lacrosse_tx_const.te_short) <
|
|
ws_protocol_lacrosse_tx_const.te_delta) &&
|
|
(instance->header_count > 1)) {
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepCheckDuration;
|
|
instance->decoder.decode_data = 0;
|
|
instance->decoder.decode_count_bit = 0;
|
|
instance->decoder.te_last = duration;
|
|
} else if(duration > (ws_protocol_lacrosse_tx_const.te_long * 2)) {
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepReset;
|
|
}
|
|
} else {
|
|
if(DURATION_DIFF(duration, LACROSSE_TX_GAP) <
|
|
ws_protocol_lacrosse_tx_const.te_delta * 2) {
|
|
instance->decoder.te_last = duration;
|
|
instance->header_count++;
|
|
} else {
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepReset;
|
|
}
|
|
}
|
|
|
|
break;
|
|
|
|
case LaCrosse_TXDecoderStepSaveDuration:
|
|
if(level) {
|
|
instance->decoder.te_last = duration;
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepCheckDuration;
|
|
} else {
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepReset;
|
|
}
|
|
break;
|
|
|
|
case LaCrosse_TXDecoderStepCheckDuration:
|
|
|
|
if(!level) {
|
|
if(duration > LACROSSE_TX_GAP * 3) {
|
|
if(DURATION_DIFF(
|
|
instance->decoder.te_last, ws_protocol_lacrosse_tx_const.te_short) <
|
|
ws_protocol_lacrosse_tx_const.te_delta) {
|
|
subghz_protocol_blocks_add_bit(&instance->decoder, 1);
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepSaveDuration;
|
|
} else if(
|
|
DURATION_DIFF(
|
|
instance->decoder.te_last, ws_protocol_lacrosse_tx_const.te_long) <
|
|
ws_protocol_lacrosse_tx_const.te_delta) {
|
|
subghz_protocol_blocks_add_bit(&instance->decoder, 0);
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepSaveDuration;
|
|
}
|
|
if((instance->decoder.decode_data & LACROSSE_TX_SUNC_MASK) ==
|
|
LACROSSE_TX_SUNC_PATTERN) {
|
|
if(ws_protocol_lacrosse_tx_check_crc(instance)) {
|
|
instance->generic.data = instance->decoder.decode_data;
|
|
instance->generic.data_count_bit = LACROSSE_TX_BIT_SIZE;
|
|
ws_protocol_lacrosse_tx_remote_controller(&instance->generic);
|
|
if(instance->base.callback)
|
|
instance->base.callback(&instance->base, instance->base.context);
|
|
}
|
|
}
|
|
|
|
instance->decoder.decode_data = 0;
|
|
instance->decoder.decode_count_bit = 0;
|
|
instance->header_count = 0;
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepReset;
|
|
break;
|
|
} else if(
|
|
(DURATION_DIFF(instance->decoder.te_last, ws_protocol_lacrosse_tx_const.te_short) <
|
|
ws_protocol_lacrosse_tx_const.te_delta) &&
|
|
(DURATION_DIFF(duration, LACROSSE_TX_GAP) <
|
|
ws_protocol_lacrosse_tx_const.te_delta * 2)) {
|
|
subghz_protocol_blocks_add_bit(&instance->decoder, 1);
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepSaveDuration;
|
|
} else if(
|
|
(DURATION_DIFF(instance->decoder.te_last, ws_protocol_lacrosse_tx_const.te_long) <
|
|
ws_protocol_lacrosse_tx_const.te_delta) &&
|
|
(DURATION_DIFF(duration, LACROSSE_TX_GAP) <
|
|
ws_protocol_lacrosse_tx_const.te_delta * 2)) {
|
|
subghz_protocol_blocks_add_bit(&instance->decoder, 0);
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepSaveDuration;
|
|
} else {
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepReset;
|
|
}
|
|
|
|
} else {
|
|
instance->decoder.parser_step = LaCrosse_TXDecoderStepReset;
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
uint8_t ws_protocol_decoder_lacrosse_tx_get_hash_data(void* context) {
|
|
furi_assert(context);
|
|
WSProtocolDecoderLaCrosse_TX* instance = context;
|
|
return subghz_protocol_blocks_get_hash_data(
|
|
&instance->decoder, (instance->decoder.decode_count_bit / 8) + 1);
|
|
}
|
|
|
|
bool ws_protocol_decoder_lacrosse_tx_serialize(
|
|
void* context,
|
|
FlipperFormat* flipper_format,
|
|
SubGhzRadioPreset* preset) {
|
|
furi_assert(context);
|
|
WSProtocolDecoderLaCrosse_TX* instance = context;
|
|
return ws_block_generic_serialize(&instance->generic, flipper_format, preset);
|
|
}
|
|
|
|
bool ws_protocol_decoder_lacrosse_tx_deserialize(void* context, FlipperFormat* flipper_format) {
|
|
furi_assert(context);
|
|
WSProtocolDecoderLaCrosse_TX* instance = context;
|
|
bool ret = false;
|
|
do {
|
|
if(!ws_block_generic_deserialize(&instance->generic, flipper_format)) {
|
|
break;
|
|
}
|
|
if(instance->generic.data_count_bit !=
|
|
ws_protocol_lacrosse_tx_const.min_count_bit_for_found) {
|
|
FURI_LOG_E(TAG, "Wrong number of bits in key");
|
|
break;
|
|
}
|
|
ret = true;
|
|
} while(false);
|
|
return ret;
|
|
}
|
|
|
|
void ws_protocol_decoder_lacrosse_tx_get_string(void* context, FuriString* output) {
|
|
furi_assert(context);
|
|
WSProtocolDecoderLaCrosse_TX* instance = context;
|
|
furi_string_printf(
|
|
output,
|
|
"%s %dbit\r\n"
|
|
"Key:0x%lX%08lX\r\n"
|
|
"Sn:0x%lX Ch:%d Bat:%d\r\n"
|
|
"Temp:%3.1f C Hum:%d%%",
|
|
instance->generic.protocol_name,
|
|
instance->generic.data_count_bit,
|
|
(uint32_t)(instance->generic.data >> 32),
|
|
(uint32_t)(instance->generic.data),
|
|
instance->generic.id,
|
|
instance->generic.channel,
|
|
instance->generic.battery_low,
|
|
(double)instance->generic.temp,
|
|
instance->generic.humidity);
|
|
}
|