mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-11-23 21:13:16 +00:00
fae392d84e
* FuriHal: region HAL draft * FuriHal,SubGhz: complete region provisioning. * Rpc: fix null pointer dereference. * Cli: device info formatting * FuriHal: region provisioning fixes and documentation.
240 lines
6 KiB
C
240 lines
6 KiB
C
/**
|
|
* @file furi_hal_subghz.h
|
|
* SubGhz HAL API
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
#include <stddef.h>
|
|
#include <toolbox/level_duration.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** Radio Presets */
|
|
typedef enum {
|
|
FuriHalSubGhzPresetIDLE, /**< default configuration */
|
|
FuriHalSubGhzPresetOok270Async, /**< OOK, bandwidth 270kHz, asynchronous */
|
|
FuriHalSubGhzPresetOok650Async, /**< OOK, bandwidth 650kHz, asynchronous */
|
|
FuriHalSubGhzPreset2FSKDev238Async, /**< FM, deviation 2.380371 kHz, asynchronous */
|
|
FuriHalSubGhzPreset2FSKDev476Async, /**< FM, deviation 47.60742 kHz, asynchronous */
|
|
FuriHalSubGhzPresetMSK99_97KbAsync, /**< MSK, deviation 47.60742 kHz, 99.97Kb/s, asynchronous */
|
|
FuriHalSubGhzPresetGFSK9_99KbAsync, /**< GFSK, deviation 19.042969 kHz, 9.996Kb/s, asynchronous */
|
|
FuriHalSubGhzPresetCustom, /**Custom Preset*/
|
|
} FuriHalSubGhzPreset;
|
|
|
|
/** Switchable Radio Paths */
|
|
typedef enum {
|
|
FuriHalSubGhzPathIsolate, /**< Isolate Radio from antenna */
|
|
FuriHalSubGhzPath433, /**< Center Frquency: 433MHz. Path 1: SW1RF1-SW2RF2, LCLCL */
|
|
FuriHalSubGhzPath315, /**< Center Frquency: 315MHz. Path 2: SW1RF2-SW2RF1, LCLCLCL */
|
|
FuriHalSubGhzPath868, /**< Center Frquency: 868MHz. Path 3: SW1RF3-SW2RF3, LCLC */
|
|
} FuriHalSubGhzPath;
|
|
|
|
/** SubGhz state */
|
|
typedef enum {
|
|
SubGhzStateInit, /**< Init pending */
|
|
|
|
SubGhzStateIdle, /**< Idle, energy save mode */
|
|
|
|
SubGhzStateAsyncRx, /**< Async RX started */
|
|
|
|
SubGhzStateAsyncTx, /**< Async TX started, DMA and timer is on */
|
|
SubGhzStateAsyncTxLast, /**< Async TX continue, DMA completed and timer got last value to go */
|
|
SubGhzStateAsyncTxEnd, /**< Async TX complete, cleanup needed */
|
|
|
|
} SubGhzState;
|
|
|
|
/** SubGhz regulation, receive transmission on the current frequency for the
|
|
* region */
|
|
typedef enum {
|
|
SubGhzRegulationOnlyRx, /**only Rx*/
|
|
SubGhzRegulationTxRx, /**TxRx*/
|
|
} SubGhzRegulation;
|
|
|
|
/** Initialize and switch to power save mode Used by internal API-HAL
|
|
* initalization routine Can be used to reinitialize device to safe state and
|
|
* send it to sleep
|
|
*/
|
|
void furi_hal_subghz_init();
|
|
|
|
/** Send device to sleep mode
|
|
*/
|
|
void furi_hal_subghz_sleep();
|
|
|
|
/** Dump info to stdout
|
|
*/
|
|
void furi_hal_subghz_dump_state();
|
|
|
|
/** Load registers from preset by preset name
|
|
*
|
|
* @param preset to load
|
|
*/
|
|
void furi_hal_subghz_load_preset(FuriHalSubGhzPreset preset);
|
|
|
|
/** Load custom registers from preset
|
|
*
|
|
* @param preset_data registers to load
|
|
*/
|
|
void furi_hal_subghz_load_custom_preset(uint8_t* preset_data);
|
|
|
|
/** Load registers
|
|
*
|
|
* @param data Registers data
|
|
*/
|
|
void furi_hal_subghz_load_registers(uint8_t* data);
|
|
|
|
/** Load PATABLE
|
|
*
|
|
* @param data 8 uint8_t values
|
|
*/
|
|
void furi_hal_subghz_load_patable(const uint8_t data[8]);
|
|
|
|
/** Write packet to FIFO
|
|
*
|
|
* @param data bytes array
|
|
* @param size size
|
|
*/
|
|
void furi_hal_subghz_write_packet(const uint8_t* data, uint8_t size);
|
|
|
|
/** Check if recieve pipe is not empty
|
|
*
|
|
* @return true if not empty
|
|
*/
|
|
bool furi_hal_subghz_rx_pipe_not_empty();
|
|
|
|
/** Check if recieved data crc is valid
|
|
*
|
|
* @return true if valid
|
|
*/
|
|
bool furi_hal_subghz_is_rx_data_crc_valid();
|
|
|
|
/** Read packet from FIFO
|
|
*
|
|
* @param data pointer
|
|
* @param size size
|
|
*/
|
|
void furi_hal_subghz_read_packet(uint8_t* data, uint8_t* size);
|
|
|
|
/** Flush rx FIFO buffer
|
|
*/
|
|
void furi_hal_subghz_flush_rx();
|
|
|
|
/** Flush tx FIFO buffer
|
|
*/
|
|
void furi_hal_subghz_flush_tx();
|
|
|
|
/** Shutdown Issue spwd command
|
|
* @warning registers content will be lost
|
|
*/
|
|
void furi_hal_subghz_shutdown();
|
|
|
|
/** Reset Issue reset command
|
|
* @warning registers content will be lost
|
|
*/
|
|
void furi_hal_subghz_reset();
|
|
|
|
/** Switch to Idle
|
|
*/
|
|
void furi_hal_subghz_idle();
|
|
|
|
/** Switch to Recieve
|
|
*/
|
|
void furi_hal_subghz_rx();
|
|
|
|
/** Switch to Transmit
|
|
*
|
|
* @return true if the transfer is allowed by belonging to the region
|
|
*/
|
|
bool furi_hal_subghz_tx();
|
|
|
|
/** Get RSSI value in dBm
|
|
*
|
|
* @return RSSI value
|
|
*/
|
|
float furi_hal_subghz_get_rssi();
|
|
|
|
/** Get LQI
|
|
*
|
|
* @return LQI value
|
|
*/
|
|
uint8_t furi_hal_subghz_get_lqi();
|
|
|
|
/** Check if frequency is in valid range
|
|
*
|
|
* @param value frequency in Hz
|
|
*
|
|
* @return true if frequncy is valid, otherwise false
|
|
*/
|
|
bool furi_hal_subghz_is_frequency_valid(uint32_t value);
|
|
|
|
/** Set frequency and path This function automatically selects antenna matching
|
|
* network
|
|
*
|
|
* @param value frequency in Hz
|
|
*
|
|
* @return real frequency in herz
|
|
*/
|
|
uint32_t furi_hal_subghz_set_frequency_and_path(uint32_t value);
|
|
|
|
/** Set frequency
|
|
*
|
|
* @param value frequency in Hz
|
|
*
|
|
* @return real frequency in herz
|
|
*/
|
|
uint32_t furi_hal_subghz_set_frequency(uint32_t value);
|
|
|
|
/** Set path
|
|
*
|
|
* @param path path to use
|
|
*/
|
|
void furi_hal_subghz_set_path(FuriHalSubGhzPath path);
|
|
|
|
/* High Level API */
|
|
|
|
/** Signal Timings Capture callback */
|
|
typedef void (*FuriHalSubGhzCaptureCallback)(bool level, uint32_t duration, void* context);
|
|
|
|
/** Enable signal timings capture Initializes GPIO and TIM2 for timings capture
|
|
*
|
|
* @param callback FuriHalSubGhzCaptureCallback
|
|
* @param context callback context
|
|
*/
|
|
void furi_hal_subghz_start_async_rx(FuriHalSubGhzCaptureCallback callback, void* context);
|
|
|
|
/** Disable signal timings capture Resets GPIO and TIM2
|
|
*/
|
|
void furi_hal_subghz_stop_async_rx();
|
|
|
|
/** Async TX callback type
|
|
* @param context callback context
|
|
* @return LevelDuration
|
|
*/
|
|
typedef LevelDuration (*FuriHalSubGhzAsyncTxCallback)(void* context);
|
|
|
|
/** Start async TX Initializes GPIO, TIM2 and DMA1 for signal output
|
|
*
|
|
* @param callback FuriHalSubGhzAsyncTxCallback
|
|
* @param context callback context
|
|
*
|
|
* @return true if the transfer is allowed by belonging to the region
|
|
*/
|
|
bool furi_hal_subghz_start_async_tx(FuriHalSubGhzAsyncTxCallback callback, void* context);
|
|
|
|
/** Wait for async transmission to complete
|
|
*
|
|
* @return true if TX complete
|
|
*/
|
|
bool furi_hal_subghz_is_async_tx_complete();
|
|
|
|
/** Stop async transmission and cleanup resources Resets GPIO, TIM2, and DMA1
|
|
*/
|
|
void furi_hal_subghz_stop_async_tx();
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|