#include <furi_hal_subghz.h>
#include <furi_hal_subghz_configs.h>

#include <furi_hal_version.h>
#include <furi_hal_rtc.h>
#include <furi_hal_spi.h>
#include <furi_hal_interrupt.h>
#include <furi_hal_resources.h>
#include <furi_hal_power.h>

#include <stm32wbxx_ll_dma.h>

#include <lib/flipper_format/flipper_format.h>

#include <furi.h>
#include <cc1101.h>
#include <stdio.h>

#define TAG "FuriHalSubGhz"
//Initialisation timeout (ms)
#define INIT_TIMEOUT 10

static uint32_t furi_hal_subghz_debug_gpio_buff[2];
static bool last_OTG_state = false;

/* DMA Channels definition */
#define SUBGHZ_DMA DMA2
#define SUBGHZ_DMA_CH1_CHANNEL LL_DMA_CHANNEL_1
#define SUBGHZ_DMA_CH2_CHANNEL LL_DMA_CHANNEL_2
#define SUBGHZ_DMA_CH1_IRQ FuriHalInterruptIdDma2Ch1
#define SUBGHZ_DMA_CH1_DEF SUBGHZ_DMA, SUBGHZ_DMA_CH1_CHANNEL
#define SUBGHZ_DMA_CH2_DEF SUBGHZ_DMA, SUBGHZ_DMA_CH2_CHANNEL

volatile FuriHalSubGhz furi_hal_subghz = {
    .state = SubGhzStateInit,
    .regulation = SubGhzRegulationTxRx,
    .preset = FuriHalSubGhzPresetIDLE,
    .async_mirror_pin = NULL,
    .radio_type = SubGhzRadioInternal,
    .spi_bus_handle = &furi_hal_spi_bus_handle_subghz,
    .cc1101_g0_pin = &gpio_cc1101_g0,
};

bool furi_hal_subghz_set_radio_type(SubGhzRadioType state) {
    furi_hal_subghz.radio_type = state;
    furi_hal_spi_bus_handle_deinit(furi_hal_subghz.spi_bus_handle);
    if(state) {
        furi_hal_subghz.spi_bus_handle = &furi_hal_spi_bus_handle_subghz_ext;
        furi_hal_subghz.cc1101_g0_pin = &gpio_cc1101_g0_ext;
    } else {
        furi_hal_subghz.spi_bus_handle = &furi_hal_spi_bus_handle_subghz;
        furi_hal_subghz.cc1101_g0_pin = &gpio_cc1101_g0;
    }
    furi_hal_spi_bus_handle_init(furi_hal_subghz.spi_bus_handle);
    furi_hal_subghz_init_check();
    return true;
}

SubGhzRadioType furi_hal_subghz_get_radio_type(void) {
    return furi_hal_subghz.radio_type;
}

void furi_hal_subghz_set_async_mirror_pin(const GpioPin* pin) {
    furi_hal_subghz.async_mirror_pin = pin;
}

void furi_hal_subghz_init(void) {
    furi_hal_subghz_init_check();
}

void furi_hal_subghz_enable_ext_power(void) {
    if(furi_hal_subghz.radio_type != SubGhzRadioInternal && !furi_hal_power_is_otg_enabled()) {
        furi_hal_power_enable_otg();
    }
}

void furi_hal_subghz_disable_ext_power(void) {
    if(furi_hal_subghz.radio_type != SubGhzRadioInternal && !last_OTG_state) {
        furi_hal_power_disable_otg();
    }
}

bool furi_hal_subghz_check_radio(void) {
    bool result = true;

    furi_hal_subghz_enable_ext_power();

    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    uint8_t ver = cc1101_get_version(furi_hal_subghz.spi_bus_handle);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);

    if((ver != 0) && (ver != 255)) {
        FURI_LOG_D(TAG, "Radio check ok");
    } else {
        FURI_LOG_D(TAG, "Radio check failed");
        furi_hal_subghz_disable_ext_power();
        result = false;
    }
    return result;
}

bool furi_hal_subghz_init_check(void) {
    bool result = true;

    furi_assert(furi_hal_subghz.state == SubGhzStateInit);
    furi_hal_subghz.state = SubGhzStateIdle;
    furi_hal_subghz.preset = FuriHalSubGhzPresetIDLE;

    last_OTG_state = furi_hal_power_is_otg_enabled();
    furi_hal_subghz_enable_ext_power();
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);

#ifdef FURI_HAL_SUBGHZ_TX_GPIO
    furi_hal_gpio_init(&FURI_HAL_SUBGHZ_TX_GPIO, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
#endif

    // Reset
    furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
    cc1101_reset(furi_hal_subghz.spi_bus_handle);
    cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHighImpedance);

    // Prepare GD0 for power on self test
    furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);

    // GD0 low
    cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHW);
    uint32_t test_start_time = furi_get_tick();
    while(furi_hal_gpio_read(furi_hal_subghz.cc1101_g0_pin) != false && result) {
        if(furi_get_tick() - test_start_time > INIT_TIMEOUT) {
            result = false;
        }
    }

    // GD0 high
    cc1101_write_reg(
        furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHW | CC1101_IOCFG_INV);
    test_start_time = furi_get_tick();
    while(furi_hal_gpio_read(furi_hal_subghz.cc1101_g0_pin) != true && result) {
        if(furi_get_tick() - test_start_time > INIT_TIMEOUT) {
            result = false;
        }
    }

    // Reset GD0 to floating state
    cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHighImpedance);
    furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);

    // RF switches
    furi_hal_gpio_init(&gpio_rf_sw_0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
    cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW);

    // Go to sleep
    cc1101_shutdown(furi_hal_subghz.spi_bus_handle);

    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);

    if(result) {
        FURI_LOG_I(TAG, "Init OK");
    } else {
        FURI_LOG_E(TAG, "Failed to initialization");
        furi_hal_subghz_disable_ext_power();
    }
    return result;
}

void furi_hal_subghz_sleep() {
    furi_assert(furi_hal_subghz.state == SubGhzStateIdle);
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);

    cc1101_switch_to_idle(furi_hal_subghz.spi_bus_handle);

    cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHighImpedance);
    furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);

    cc1101_shutdown(furi_hal_subghz.spi_bus_handle);

    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);

    furi_hal_subghz_disable_ext_power();

    furi_hal_subghz.preset = FuriHalSubGhzPresetIDLE;
}

void furi_hal_subghz_dump_state() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    printf(
        "[furi_hal_subghz] cc1101 chip %d, version %d\r\n",
        cc1101_get_partnumber(furi_hal_subghz.spi_bus_handle),
        cc1101_get_version(furi_hal_subghz.spi_bus_handle));
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

void furi_hal_subghz_load_preset(FuriHalSubGhzPreset preset) {
    if(preset == FuriHalSubGhzPresetOok650Async) {
        furi_hal_subghz_load_registers((uint8_t*)furi_hal_subghz_preset_ook_650khz_async_regs);
        furi_hal_subghz_load_patable(furi_hal_subghz_preset_ook_async_patable);
    } else if(preset == FuriHalSubGhzPresetOok270Async) {
        furi_hal_subghz_load_registers((uint8_t*)furi_hal_subghz_preset_ook_270khz_async_regs);
        furi_hal_subghz_load_patable(furi_hal_subghz_preset_ook_async_patable);
    } else if(preset == FuriHalSubGhzPreset2FSKDev238Async) {
        furi_hal_subghz_load_registers(
            (uint8_t*)furi_hal_subghz_preset_2fsk_dev2_38khz_async_regs);
        furi_hal_subghz_load_patable(furi_hal_subghz_preset_2fsk_async_patable);
    } else if(preset == FuriHalSubGhzPreset2FSKDev476Async) {
        furi_hal_subghz_load_registers(
            (uint8_t*)furi_hal_subghz_preset_2fsk_dev47_6khz_async_regs);
        furi_hal_subghz_load_patable(furi_hal_subghz_preset_2fsk_async_patable);
    } else if(preset == FuriHalSubGhzPresetMSK99_97KbAsync) {
        furi_hal_subghz_load_registers((uint8_t*)furi_hal_subghz_preset_msk_99_97kb_async_regs);
        furi_hal_subghz_load_patable(furi_hal_subghz_preset_msk_async_patable);
    } else if(preset == FuriHalSubGhzPresetGFSK9_99KbAsync) {
        furi_hal_subghz_load_registers((uint8_t*)furi_hal_subghz_preset_gfsk_9_99kb_async_regs);
        furi_hal_subghz_load_patable(furi_hal_subghz_preset_gfsk_async_patable);
    } else {
        furi_crash("SubGhz: Missing config.");
    }
    furi_hal_subghz.preset = preset;
}

void furi_hal_subghz_load_custom_preset(uint8_t* preset_data) {
    //load config
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_reset(furi_hal_subghz.spi_bus_handle);
    uint32_t i = 0;
    uint8_t pa[8] = {0};
    while(preset_data[i]) {
        cc1101_write_reg(furi_hal_subghz.spi_bus_handle, preset_data[i], preset_data[i + 1]);
        i += 2;
    }
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);

    //load pa table
    memcpy(&pa[0], &preset_data[i + 2], 8);
    furi_hal_subghz_load_patable(pa);
    furi_hal_subghz.preset = FuriHalSubGhzPresetCustom;

    //show debug
    if(furi_hal_rtc_is_flag_set(FuriHalRtcFlagDebug)) {
        i = 0;
        FURI_LOG_D(TAG, "Loading custom preset");
        while(preset_data[i]) {
            FURI_LOG_D(TAG, "Reg[%lu]: %02X=%02X", i, preset_data[i], preset_data[i + 1]);
            i += 2;
        }
        for(uint8_t y = i; y < i + 10; y++) {
            FURI_LOG_D(TAG, "PA[%u]:  %02X", y, preset_data[y]);
        }
    }
}

void furi_hal_subghz_load_registers(uint8_t* data) {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_reset(furi_hal_subghz.spi_bus_handle);
    uint32_t i = 0;
    while(data[i]) {
        cc1101_write_reg(furi_hal_subghz.spi_bus_handle, data[i], data[i + 1]);
        i += 2;
    }
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

void furi_hal_subghz_load_patable(const uint8_t data[8]) {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_set_pa_table(furi_hal_subghz.spi_bus_handle, data);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

void furi_hal_subghz_write_packet(const uint8_t* data, uint8_t size) {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_flush_tx(furi_hal_subghz.spi_bus_handle);
    cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_FIFO, size);
    cc1101_write_fifo(furi_hal_subghz.spi_bus_handle, data, size);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

void furi_hal_subghz_flush_rx() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_flush_rx(furi_hal_subghz.spi_bus_handle);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

void furi_hal_subghz_flush_tx() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_flush_tx(furi_hal_subghz.spi_bus_handle);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

bool furi_hal_subghz_rx_pipe_not_empty() {
    CC1101RxBytes status[1];
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_read_reg(
        furi_hal_subghz.spi_bus_handle, (CC1101_STATUS_RXBYTES) | CC1101_BURST, (uint8_t*)status);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
    // TODO: you can add a buffer overflow flag if needed
    if(status->NUM_RXBYTES > 0) {
        return true;
    } else {
        return false;
    }
}

bool furi_hal_subghz_is_rx_data_crc_valid() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    uint8_t data[1];
    cc1101_read_reg(furi_hal_subghz.spi_bus_handle, CC1101_STATUS_LQI | CC1101_BURST, data);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
    if(((data[0] >> 7) & 0x01)) {
        return true;
    } else {
        return false;
    }
}

void furi_hal_subghz_read_packet(uint8_t* data, uint8_t* size) {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_read_fifo(furi_hal_subghz.spi_bus_handle, data, size);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

void furi_hal_subghz_shutdown() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    // Reset and shutdown
    cc1101_shutdown(furi_hal_subghz.spi_bus_handle);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
    furi_hal_subghz_disable_ext_power();
}

void furi_hal_subghz_reset() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
    cc1101_switch_to_idle(furi_hal_subghz.spi_bus_handle);
    cc1101_reset(furi_hal_subghz.spi_bus_handle);
    cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHighImpedance);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

void furi_hal_subghz_idle() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_switch_to_idle(furi_hal_subghz.spi_bus_handle);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

void furi_hal_subghz_rx() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_switch_to_rx(furi_hal_subghz.spi_bus_handle);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

bool furi_hal_subghz_tx() {
    if(furi_hal_subghz.regulation != SubGhzRegulationTxRx) return false;
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    cc1101_switch_to_tx(furi_hal_subghz.spi_bus_handle);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
    return true;
}

float furi_hal_subghz_get_rssi() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    int32_t rssi_dec = cc1101_get_rssi(furi_hal_subghz.spi_bus_handle);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);

    float rssi = rssi_dec;
    if(rssi_dec >= 128) {
        rssi = ((rssi - 256.0f) / 2.0f) - 74.0f;
    } else {
        rssi = (rssi / 2.0f) - 74.0f;
    }

    return rssi;
}

uint8_t furi_hal_subghz_get_lqi() {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    uint8_t data[1];
    cc1101_read_reg(furi_hal_subghz.spi_bus_handle, CC1101_STATUS_LQI | CC1101_BURST, data);
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
    return data[0] & 0x7F;
}

/* 
 Modified by @tkerby & MX to the full YARD Stick One extended range of 281-361 MHz, 378-481 MHz, and 749-962 MHz. 
 These changes are at your own risk. The PLL may not lock and FZ devs have warned of possible damage!
 */

bool furi_hal_subghz_is_frequency_valid(uint32_t value) {
    if(!(value >= 281000000 && value <= 361000000) &&
       !(value >= 378000000 && value <= 481000000) &&
       !(value >= 749000000 && value <= 962000000)) {
        return false;
    }

    return true;
}

uint32_t furi_hal_subghz_set_frequency_and_path(uint32_t value) {
    // Set these values to the extended frequency range only. They dont define if you can transmit but do select the correct RF path
    value = furi_hal_subghz_set_frequency(value);
    if(value >= 281000000 && value <= 361000000) {
        furi_hal_subghz_set_path(FuriHalSubGhzPath315);
    } else if(value >= 378000000 && value <= 481000000) {
        furi_hal_subghz_set_path(FuriHalSubGhzPath433);
    } else if(value >= 749000000 && value <= 962000000) {
        furi_hal_subghz_set_path(FuriHalSubGhzPath868);
    } else {
        furi_crash("SubGhz: Incorrect frequency during set.");
    }
    return value;
}

bool furi_hal_subghz_is_tx_allowed(uint32_t value) {
    bool is_extended = false;

    // TODO: !!! Move file check to another place
    Storage* storage = furi_record_open(RECORD_STORAGE);
    FlipperFormat* fff_data_file = flipper_format_file_alloc(storage);

    if(flipper_format_file_open_existing(fff_data_file, "/ext/subghz/assets/dangerous_settings")) {
        flipper_format_read_bool(
            fff_data_file, "yes_i_want_to_destroy_my_flipper", &is_extended, 1);
    }

    flipper_format_free(fff_data_file);
    furi_record_close(RECORD_STORAGE);

    if(!(value >= 299999755 && value <= 350000335) &&
       !(value >= 386999938 && value <= 464000000) &&
       !(value >= 778999847 && value <= 928000000) && !(is_extended)) {
        FURI_LOG_I(TAG, "Frequency blocked - outside default range");
        return false;
    } else if(
        !(value >= 281000000 && value <= 361000000) &&
        !(value >= 378000000 && value <= 481000000) &&
        !(value >= 749000000 && value <= 962000000) && is_extended) {
        FURI_LOG_I(TAG, "Frequency blocked - outside dangerous range");
        return false;
    }

    return true;
}

uint32_t furi_hal_subghz_set_frequency(uint32_t value) {
    furi_hal_subghz.regulation = SubGhzRegulationTxRx;

    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    uint32_t real_frequency = cc1101_set_frequency(furi_hal_subghz.spi_bus_handle, value);
    cc1101_calibrate(furi_hal_subghz.spi_bus_handle);

    while(true) {
        CC1101Status status = cc1101_get_status(furi_hal_subghz.spi_bus_handle);
        if(status.STATE == CC1101StateIDLE) break;
    }

    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
    return real_frequency;
}

void furi_hal_subghz_set_path(FuriHalSubGhzPath path) {
    furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
    if(path == FuriHalSubGhzPath433) {
        furi_hal_gpio_write(&gpio_rf_sw_0, 0);
        cc1101_write_reg(
            furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW | CC1101_IOCFG_INV);
    } else if(path == FuriHalSubGhzPath315) {
        furi_hal_gpio_write(&gpio_rf_sw_0, 1);
        cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW);
    } else if(path == FuriHalSubGhzPath868) {
        furi_hal_gpio_write(&gpio_rf_sw_0, 1);
        cc1101_write_reg(
            furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW | CC1101_IOCFG_INV);
    } else if(path == FuriHalSubGhzPathIsolate) {
        furi_hal_gpio_write(&gpio_rf_sw_0, 0);
        cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW);
    } else {
        furi_crash("SubGhz: Incorrect path during set.");
    }
    furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}

static bool furi_hal_subghz_start_debug() {
    bool ret = false;
    if(furi_hal_subghz.async_mirror_pin != NULL) {
        furi_hal_gpio_init(
            furi_hal_subghz.async_mirror_pin,
            GpioModeOutputPushPull,
            GpioPullNo,
            GpioSpeedVeryHigh);
        ret = true;
    }
    return ret;
}

static bool furi_hal_subghz_stop_debug() {
    bool ret = false;
    if(furi_hal_subghz.async_mirror_pin != NULL) {
        furi_hal_gpio_init(
            furi_hal_subghz.async_mirror_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
        ret = true;
    }
    return ret;
}

volatile FuriHalSubGhzCaptureCallback furi_hal_subghz_capture_callback = NULL;
volatile void* furi_hal_subghz_capture_callback_context = NULL;

static void furi_hal_subghz_capture_ISR() {
    if(!furi_hal_gpio_read(furi_hal_subghz.cc1101_g0_pin)) {
        if(furi_hal_subghz_capture_callback) {
            if(furi_hal_subghz.async_mirror_pin != NULL)
                furi_hal_gpio_write(furi_hal_subghz.async_mirror_pin, false);

            furi_hal_subghz_capture_callback(
                true, TIM2->CNT, (void*)furi_hal_subghz_capture_callback_context);
        }
    } else {
        if(furi_hal_subghz_capture_callback) {
            if(furi_hal_subghz.async_mirror_pin != NULL)
                furi_hal_gpio_write(furi_hal_subghz.async_mirror_pin, true);

            furi_hal_subghz_capture_callback(
                false, TIM2->CNT, (void*)furi_hal_subghz_capture_callback_context);
        }
    }
    //Forced correction for improved accuracy
    TIM2->CNT = 9;
}

void furi_hal_subghz_start_async_rx(FuriHalSubGhzCaptureCallback callback, void* context) {
    furi_assert(furi_hal_subghz.state == SubGhzStateIdle);
    furi_hal_subghz.state = SubGhzStateAsyncRx;

    furi_hal_subghz_capture_callback = callback;
    furi_hal_subghz_capture_callback_context = context;

    furi_hal_gpio_init(
        furi_hal_subghz.cc1101_g0_pin, GpioModeInterruptRiseFall, GpioPullUp, GpioSpeedVeryHigh);
    furi_hal_gpio_add_int_callback(
        furi_hal_subghz.cc1101_g0_pin,
        furi_hal_subghz_capture_ISR,
        furi_hal_subghz_capture_callback);
    furi_hal_gpio_enable_int_callback(furi_hal_subghz.cc1101_g0_pin);

    // Timer: base
    LL_TIM_InitTypeDef TIM_InitStruct = {0};
    TIM_InitStruct.Prescaler = 64 - 1;
    TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP;
    TIM_InitStruct.Autoreload = 0x7FFFFFFE;
    TIM_InitStruct.ClockDivision = LL_TIM_CLOCKDIVISION_DIV4; // Clock division for capture filter
    LL_TIM_Init(TIM2, &TIM_InitStruct);

    // Timer: advanced
    LL_TIM_SetClockSource(TIM2, LL_TIM_CLOCKSOURCE_INTERNAL);
    LL_TIM_DisableARRPreload(TIM2);
    LL_TIM_DisableDMAReq_TRIG(TIM2);
    LL_TIM_DisableIT_TRIG(TIM2);

    // Start timer
    LL_TIM_SetCounter(TIM2, 0);
    LL_TIM_EnableCounter(TIM2);

    // Start debug
    furi_hal_subghz_start_debug();

    // Switch to RX
    furi_hal_subghz_rx();

    // Not used with current implementation
    // Clear the variable after the end of the session
    //furi_hal_subghz_capture_delta_duration = 0;
}

void furi_hal_subghz_stop_async_rx() {
    furi_assert(furi_hal_subghz.state == SubGhzStateAsyncRx);
    furi_hal_subghz.state = SubGhzStateIdle;

    // Shutdown radio
    furi_hal_subghz_idle();

    FURI_CRITICAL_ENTER();
    LL_TIM_DeInit(TIM2);

    // Stop debug
    furi_hal_subghz_stop_debug();

    FURI_CRITICAL_EXIT();

    furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
}

typedef struct {
    uint32_t* buffer;
    LevelDuration carry_ld;
    FuriHalSubGhzAsyncTxCallback callback;
    void* callback_context;
    uint64_t duty_high;
    uint64_t duty_low;
} FuriHalSubGhzAsyncTx;

static FuriHalSubGhzAsyncTx furi_hal_subghz_async_tx = {0};

static void furi_hal_subghz_async_tx_refill(uint32_t* buffer, size_t samples) {
    furi_assert(furi_hal_subghz.state == SubGhzStateAsyncTx);
    while(samples > 0) {
        bool is_odd = samples % 2;
        LevelDuration ld;
        if(level_duration_is_reset(furi_hal_subghz_async_tx.carry_ld)) {
            ld = furi_hal_subghz_async_tx.callback(furi_hal_subghz_async_tx.callback_context);
        } else {
            ld = furi_hal_subghz_async_tx.carry_ld;
            furi_hal_subghz_async_tx.carry_ld = level_duration_reset();
        }

        if(level_duration_is_wait(ld)) {
            *buffer = API_HAL_SUBGHZ_ASYNC_TX_GUARD_TIME;
            buffer++;
            samples--;
        } else if(level_duration_is_reset(ld)) {
            *buffer = 0;
            buffer++;
            samples--;
            LL_DMA_DisableIT_HT(SUBGHZ_DMA_CH1_DEF);
            LL_DMA_DisableIT_TC(SUBGHZ_DMA_CH1_DEF);
            LL_TIM_EnableIT_UPDATE(TIM2);
            break;
        } else {
            bool level = level_duration_get_level(ld);

            // Inject guard time if level is incorrect
            if(is_odd != level) {
                *buffer = API_HAL_SUBGHZ_ASYNC_TX_GUARD_TIME;
                buffer++;
                samples--;
                if(is_odd) {
                    furi_hal_subghz_async_tx.duty_high += API_HAL_SUBGHZ_ASYNC_TX_GUARD_TIME;
                } else {
                    furi_hal_subghz_async_tx.duty_low += API_HAL_SUBGHZ_ASYNC_TX_GUARD_TIME;
                }

                // Special case: prevent buffer overflow if sample is last
                if(samples == 0) {
                    furi_hal_subghz_async_tx.carry_ld = ld;
                    break;
                }
            }

            uint32_t duration = level_duration_get_duration(ld);
            furi_assert(duration > 0);
            *buffer = duration;
            buffer++;
            samples--;

            if(is_odd) {
                furi_hal_subghz_async_tx.duty_high += duration;
            } else {
                furi_hal_subghz_async_tx.duty_low += duration;
            }
        }
    }
}

static void furi_hal_subghz_async_tx_dma_isr() {
    furi_assert(furi_hal_subghz.state == SubGhzStateAsyncTx);

#if SUBGHZ_DMA_CH1_CHANNEL == LL_DMA_CHANNEL_1
    if(LL_DMA_IsActiveFlag_HT1(SUBGHZ_DMA)) {
        LL_DMA_ClearFlag_HT1(SUBGHZ_DMA);
        furi_hal_subghz_async_tx_refill(
            furi_hal_subghz_async_tx.buffer, API_HAL_SUBGHZ_ASYNC_TX_BUFFER_HALF);
    }
    if(LL_DMA_IsActiveFlag_TC1(SUBGHZ_DMA)) {
        LL_DMA_ClearFlag_TC1(SUBGHZ_DMA);
        furi_hal_subghz_async_tx_refill(
            furi_hal_subghz_async_tx.buffer + API_HAL_SUBGHZ_ASYNC_TX_BUFFER_HALF,
            API_HAL_SUBGHZ_ASYNC_TX_BUFFER_HALF);
    }
#else
#error Update this code. Would you kindly?
#endif
}

static void furi_hal_subghz_async_tx_timer_isr() {
    if(LL_TIM_IsActiveFlag_UPDATE(TIM2)) {
        LL_TIM_ClearFlag_UPDATE(TIM2);
        if(LL_TIM_GetAutoReload(TIM2) == 0) {
            if(furi_hal_subghz.state == SubGhzStateAsyncTx) {
                furi_hal_subghz.state = SubGhzStateAsyncTxLast;
                LL_DMA_DisableChannel(SUBGHZ_DMA_CH1_DEF);
            } else if(furi_hal_subghz.state == SubGhzStateAsyncTxLast) {
                furi_hal_subghz.state = SubGhzStateAsyncTxEnd;
                //forcibly pulls the pin to the ground so that there is no carrier
                furi_hal_gpio_init(
                    furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullDown, GpioSpeedLow);
                LL_TIM_DisableCounter(TIM2);
            } else {
                furi_crash(NULL);
            }
        }
    }
}

bool furi_hal_subghz_start_async_tx(FuriHalSubGhzAsyncTxCallback callback, void* context) {
    furi_assert(furi_hal_subghz.state == SubGhzStateIdle);
    furi_assert(callback);

    //If transmission is prohibited by regional settings
    if(furi_hal_subghz.regulation != SubGhzRegulationTxRx) return false;

    furi_hal_subghz_async_tx.callback = callback;
    furi_hal_subghz_async_tx.callback_context = context;

    furi_hal_subghz.state = SubGhzStateAsyncTx;

    furi_hal_subghz_async_tx.duty_low = 0;
    furi_hal_subghz_async_tx.duty_high = 0;

    furi_hal_subghz_async_tx.buffer =
        malloc(API_HAL_SUBGHZ_ASYNC_TX_BUFFER_FULL * sizeof(uint32_t));

    furi_hal_gpio_write(furi_hal_subghz.cc1101_g0_pin, true);
    furi_hal_gpio_init(
        furi_hal_subghz.cc1101_g0_pin, GpioModeOutputPushPull, GpioPullNo, GpioSpeedVeryHigh);

    // Configure DMA
    LL_DMA_InitTypeDef dma_config = {0};
    dma_config.PeriphOrM2MSrcAddress = (uint32_t) & (TIM2->ARR);
    dma_config.MemoryOrM2MDstAddress = (uint32_t)furi_hal_subghz_async_tx.buffer;
    dma_config.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH;
    dma_config.Mode = LL_DMA_MODE_CIRCULAR;
    dma_config.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
    dma_config.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT;
    dma_config.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_WORD;
    dma_config.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_WORD;
    dma_config.NbData = API_HAL_SUBGHZ_ASYNC_TX_BUFFER_FULL;
    dma_config.PeriphRequest = LL_DMAMUX_REQ_TIM2_UP;
    dma_config.Priority = LL_DMA_MODE_NORMAL;
    LL_DMA_Init(SUBGHZ_DMA_CH1_DEF, &dma_config);
    furi_hal_interrupt_set_isr(SUBGHZ_DMA_CH1_IRQ, furi_hal_subghz_async_tx_dma_isr, NULL);
    LL_DMA_EnableIT_TC(SUBGHZ_DMA_CH1_DEF);
    LL_DMA_EnableIT_HT(SUBGHZ_DMA_CH1_DEF);
    LL_DMA_EnableChannel(SUBGHZ_DMA_CH1_DEF);

    // Configure TIM2
    LL_TIM_InitTypeDef TIM_InitStruct = {0};
    TIM_InitStruct.Prescaler = 64 - 1;
    TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP;
    TIM_InitStruct.Autoreload = 1000;
    TIM_InitStruct.ClockDivision = LL_TIM_CLOCKDIVISION_DIV1;
    LL_TIM_Init(TIM2, &TIM_InitStruct);
    LL_TIM_SetClockSource(TIM2, LL_TIM_CLOCKSOURCE_INTERNAL);
    LL_TIM_EnableARRPreload(TIM2);

    // Configure TIM2 CH2
    LL_TIM_OC_InitTypeDef TIM_OC_InitStruct = {0};
    TIM_OC_InitStruct.OCMode = LL_TIM_OCMODE_TOGGLE;
    TIM_OC_InitStruct.OCState = LL_TIM_OCSTATE_DISABLE;
    TIM_OC_InitStruct.OCNState = LL_TIM_OCSTATE_DISABLE;
    TIM_OC_InitStruct.CompareValue = 0;
    TIM_OC_InitStruct.OCPolarity = LL_TIM_OCPOLARITY_LOW;
    LL_TIM_OC_Init(TIM2, LL_TIM_CHANNEL_CH2, &TIM_OC_InitStruct);
    LL_TIM_OC_DisableFast(TIM2, LL_TIM_CHANNEL_CH2);
    LL_TIM_DisableMasterSlaveMode(TIM2);

    furi_hal_interrupt_set_isr(FuriHalInterruptIdTIM2, furi_hal_subghz_async_tx_timer_isr, NULL);

    furi_hal_subghz_async_tx_refill(
        furi_hal_subghz_async_tx.buffer, API_HAL_SUBGHZ_ASYNC_TX_BUFFER_FULL);

    LL_TIM_EnableDMAReq_UPDATE(TIM2);
    LL_TIM_CC_EnableChannel(TIM2, LL_TIM_CHANNEL_CH2);

    // Start counter
    LL_TIM_GenerateEvent_UPDATE(TIM2);
#ifdef FURI_HAL_SUBGHZ_TX_GPIO
    furi_hal_gpio_write(&FURI_HAL_SUBGHZ_TX_GPIO, true);
#endif
    furi_hal_subghz_tx();

    LL_TIM_SetCounter(TIM2, 0);
    LL_TIM_EnableCounter(TIM2);

    //Signal generation for external module

    // Start debug (and speaker)
    furi_hal_subghz_start_debug();

    const GpioPin* gpio = furi_hal_subghz.cc1101_g0_pin;

    if((furi_hal_subghz.async_mirror_pin != NULL) &&
       (furi_hal_subghz.radio_type == SubGhzRadioInternal)) {
        gpio = furi_hal_subghz.async_mirror_pin;
    }

    furi_hal_subghz_debug_gpio_buff[0] = (uint32_t)gpio->pin << GPIO_NUMBER;
    furi_hal_subghz_debug_gpio_buff[1] = gpio->pin;

    dma_config.MemoryOrM2MDstAddress = (uint32_t)furi_hal_subghz_debug_gpio_buff;
    dma_config.PeriphOrM2MSrcAddress = (uint32_t) & (gpio->port->BSRR);
    dma_config.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH;
    dma_config.Mode = LL_DMA_MODE_CIRCULAR;
    dma_config.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
    dma_config.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT;
    dma_config.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_WORD;
    dma_config.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_WORD;
    dma_config.NbData = 2;
    dma_config.PeriphRequest = LL_DMAMUX_REQ_TIM2_UP;
    dma_config.Priority = LL_DMA_PRIORITY_VERYHIGH;
    LL_DMA_Init(SUBGHZ_DMA_CH2_DEF, &dma_config);
    LL_DMA_SetDataLength(SUBGHZ_DMA_CH2_DEF, 2);
    LL_DMA_EnableChannel(SUBGHZ_DMA_CH2_DEF);

    return true;
}

bool furi_hal_subghz_is_async_tx_complete() {
    return furi_hal_subghz.state == SubGhzStateAsyncTxEnd;
}

void furi_hal_subghz_stop_async_tx() {
    furi_assert(
        furi_hal_subghz.state == SubGhzStateAsyncTx ||
        furi_hal_subghz.state == SubGhzStateAsyncTxLast ||
        furi_hal_subghz.state == SubGhzStateAsyncTxEnd);

    // Shutdown radio
    furi_hal_subghz_idle();

    furi_hal_gpio_write(furi_hal_subghz.cc1101_g0_pin, false);

    // Deinitialize Timer
    FURI_CRITICAL_ENTER();
    LL_TIM_DeInit(TIM2);
    furi_hal_interrupt_set_isr(FuriHalInterruptIdTIM2, NULL, NULL);

    // Deinitialize DMA
    LL_DMA_DeInit(SUBGHZ_DMA_CH1_DEF);

    furi_hal_interrupt_set_isr(SUBGHZ_DMA_CH1_IRQ, NULL, NULL);

    // Deinitialize GPIO
    furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);

    // Stop debug
    furi_hal_subghz_stop_debug();

    LL_DMA_DisableChannel(SUBGHZ_DMA_CH2_DEF);

    FURI_CRITICAL_EXIT();

    free(furi_hal_subghz_async_tx.buffer);

    float duty_cycle =
        100.0f * (float)furi_hal_subghz_async_tx.duty_high /
        ((float)furi_hal_subghz_async_tx.duty_low + (float)furi_hal_subghz_async_tx.duty_high);
    FURI_LOG_D(
        TAG,
        "Async TX Radio stats: on %0.0fus, off %0.0fus, DutyCycle: %0.0f%%",
        (double)furi_hal_subghz_async_tx.duty_high,
        (double)furi_hal_subghz_async_tx.duty_low,
        (double)duty_cycle);

    furi_hal_subghz.state = SubGhzStateIdle;
}