#pragma once

#include <stdint.h>
#include <stdbool.h>

#define BQ27220_ERROR 0x0
#define BQ27220_SUCCESS 0x1

typedef struct {
    // Low byte, Low bit first
    bool DSG:1;         // The device is in DISCHARGE
    bool SYSDWN:1;      // System down bit indicating the system should shut down
    bool TDA:1;         // Terminate Discharge Alarm
    bool BATTPRES:1;    // Battery Present detected
    bool AUTH_GD:1;     // Detect inserted battery
    bool OCVGD:1;       // Good OCV measurement taken
    bool TCA:1;         // Terminate Charge Alarm
    bool RSVD:1;        // Reserved
    // High byte, Low bit first
    bool CHGINH:1;      // Charge inhibit
    bool FC:1;          // Full-charged is detected
    bool OTD:1;         // Overtemperature in discharge condition is detected
    bool OTC:1;         // Overtemperature in charge condition is detected
    bool SLEEP:1;       // Device is operating in SLEEP mode when set
    bool OCVFAIL:1;     // Status bit indicating that the OCV reading failed due to current
    bool OCVCOMP:1;     // An OCV measurement update is complete
    bool FD:1;          // Full-discharge is detected
} BatteryStatus;

typedef struct {
    // Low byte, Low bit first
    bool CALMD:1;
    bool SEC0:1;
    bool SEC1:1;
    bool EDV2:1;
    bool VDQ:1;
    bool INITCOMP:1;
    bool SMTH:1;
    bool BTPINT:1;
    // High byte, Low bit first
    uint8_t RSVD1:2;
    bool CFGUPDATE:1;
    uint8_t RSVD0:5;
} OperationStatus;

/* Initialize Driver */
void bq27220_init();

/* Get battery voltage in mV or error */
uint16_t bq27220_get_voltage();

/* Get current in mA or error*/
int16_t bq27220_get_current();

/* Get battery status */
uint8_t bq27220_get_battery_status(BatteryStatus* battery_status);

/* Get operation status */
uint8_t bq27220_get_operation_status(OperationStatus* operation_status);

/* Get temperature in units of 0.1°K */
uint16_t bq27220_get_temperature();

/* Get compensated full charge capacity in in mAh */
uint16_t bq27220_get_full_charge_capacity();

/* Get remaining capacity in in mAh */
uint16_t bq27220_get_remaining_capacity();

/* Get predicted remaining battery capacity in percents */
uint16_t bq27220_get_state_of_charge();

/* Get ratio of full charge capacity over design capacity in percents */
uint16_t bq27220_get_state_of_health();