MX
16a3f4c06a
add missing include
2024-01-19 23:19:07 +03:00
MX
eef4574a63
small fixes for subghz cli
2024-01-19 23:17:20 +03:00
MX
36114de5f7
SubGhz: add subghz tx_from_file CLI cmd, major TX flow refactoring, various improvements and bug fixes ( #3302 )
...
By Skorpionm
* SubGhz: add cmd CLI "subghz tx_from_file"
* SubGhz: add sending raw.sub files
* SubGhz: add load custom preset
* SubGhz: remove unnecessary files
* SubGhz: change message
* SubGhz: fix printf formatting
* SubGhz: Cli refactoring code
* FuriHal: add furi_hal_subghz Tx Rx IDLE state switching test
* SubGhz: remove debug code, fix ext driver compilation
* SubGhz: cleanup code, move wait status routine to cc1101 driver
* SubGhz: proper pin mode transition in tx stop isr routine, proper DMA and ISR priorities, fix issue with async tx stuck
* SubGhz: simplify async tx stop flow, fix ISR ARR check condition race
* SubGhz: check ARR only when we transmitting
* SubGhz: check ARR only when we transmitting for ext cc1101
* SubGhz: lower ISR priorities to safe level
* SubGhz: proper gpio config, comments update
Co-authored-by: あく <alleteam@gmail.com>
2024-01-19 22:45:59 +03:00
MX
b87a8ca329
Merge branch 'ofw_dev' into dev
2023-10-15 01:30:55 +03:00
あく
f45a5dff43
Fix various crashes if debug libraries used ( #3144 )
...
* FuriHal: enable HSI in stop mode only if we use STOP0, proper SMPS selected clock assert
* Furi: fix double crash caused by bkpt use outside of debug session
* Libs: update ERC and MGG contrast
* Fix various crashes with LIB_DEBUG=1
* BadUsb: size_t where it should be and proper printf types
* Various fixes and make PVS happy
* FuriHal: proper CCID status and make PVS happy
* boot: update mode: graceful handling of corrupted stage file
---------
Co-authored-by: hedger <hedger@nanode.su>
2023-10-12 20:34:30 +04:00
MX
1653abe0ef
Remove unused table
2023-09-05 05:51:21 +03:00
MX
9c6e20356f
Merge branch 'ofw-dev' into dev
2023-09-04 16:47:08 +03:00
Sergey Gavrilov
0b806c2360
Storage: force mount ( #3033 )
...
* Storage: count opened files
* Storage: sd mount
* Storage: prompt to mount SD card if not mounted
* F18: update API
* F18: update API version
* Fix logger naming scheme
* Storage: storage_files_count -> storage_open_files_count
Co-authored-by: あく <alleteam@gmail.com>
2023-09-04 14:10:07 +09:00
MX
c4b04a06bb
Merge branch 'ofw-dev' into dev
2023-07-12 21:19:16 +03:00
Skorpionm
25ec09c7eb
SubGhz: fix check connect cc1101_ext ( #2857 )
...
* SubGhz: fix check connect cc1101_ext
* SubGhz: fix syntax
* SubGhz: enable interface pin pullups
* SubGhz: fix syntax
* SubGhz: fix CLI check connect CC1101_ext
* SubGhz: fix CLI display of the selected device
Co-authored-by: あく <alleteam@gmail.com>
2023-07-12 13:41:46 +04:00
gid9798
2ef07a7a6c
SubGhz: add some consts and fix unit tests
2023-07-03 14:02:57 +03:00
gid9798
01d7beef4e
SubGhz: furi_hal_subghz remove preset load function by name
2023-07-03 13:36:26 +03:00
Skorpionm
8c93695d01
[FL-3375] SubGhz: add CC1101 module external ( #2747 )
...
* SubGhz: add CC1101 Ext driver
* SubGhz: move TIM2 -> TIM17 use cc1101_ext
* FuriHal: SPI move channel DMA 3,4 -> 6.7
* Documentation: fix font
* SubGhz: add work with SubGhz devices by link to device
* SubGhz: add support switching external/internal cc1101 "subghz chat"
* SubGhz: add support switching external/internal cc1101 "subghz tx" and "subghz rx"
* SubGhz: add "Radio Settings" scene
* SubGhz: add icon
* SubGhz: add supported CC1101 external module in SubGhz app
* SubGhz: fix check frequency supported radio device
* SubGhz: fix clang-formatted
* Sughz: move dirver CC1101_Ext to lib , compile cmd ./fbt launch_app APPSRC=radio_device_cc1101_ext
* SubGhz: fix CLI
* SubGhz: fix PVS
* SubGhz: delete comments
* SubGhz: fix unit_test
* Format sources
* Update api symbols and drivers targets
* Drivers: find proper place for target option
* SubGhz: external device connected method naming
* Format sources
* SubGhz: fix module selection menu, when external is not connected
* SubGhz: fix furi_assert(device);
* SubGhz: fix split h and c
* SubGhz: furi_hal_subghz remove preset load function by name
* SubGhz: deleted comments
* Format Sources
* SubGhz: add some consts and fix unit tests
* Sync API Symbols
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2023-06-30 23:03:36 +09:00
gid9798
6e26de3763
SubGhz app: fix is_tx_allowed and freq check
2023-06-20 14:28:03 +03:00
gid9798
72712d9f07
updated TODO descriptions
2023-06-19 12:51:02 +03:00
gid9798
5eb677aa55
prt2
2023-06-18 20:25:40 +03:00
MX
ee8bbdcfe0
remake just a bit, disable external on command end
2023-06-14 18:05:05 +03:00
Sil333033
6aed650bcc
added external cc1101 module at cli
2023-06-12 14:15:22 +02:00
MX
774156a78a
Merge branch 'ofw-dev' into dev
2023-05-31 17:14:49 +03:00
Skorpionm
d09c59fd2f
[FL-3340] SubGhz: fix flipper crashes after exiting broadcast blocking message and crash cli ( #2714 )
2023-05-31 21:59:12 +09:00
MX
b0b9e507e7
SubGHz combine FuriString allocs
2023-05-05 03:51:16 +03:00
MX
ed78c4ca04
Fixes
2023-02-08 20:49:06 +03:00
MX
bbc1ba62fc
Merge branch 'fz-dev' into dev
2023-02-08 20:12:10 +03:00
Skorpionm
31259d5304
[FL-3091] SubGhz: add protocol Alutech at-4n ( #2352 )
...
* GubGhz: add protocol Alutech at-4n
* SubGhz: fix syntax
* SubGhz: fix subghz_protocol_decoder_alutech_at_4n_get_hash_data
* SubGhz: add unit test alutech at-4n
* SubGhz: add name key
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2023-02-09 01:59:49 +09:00
MX
0dccbe28bb
Merge branch 'fz-dev' into dev
2023-02-08 17:15:17 +03:00
Skorpionm
99253a0e28
[FL-3093, FL-3087] SubGhz: Fix Raw write, add short duration filter setting ( #2300 )
...
* SubGhz: Fix recording RAW files, sometimes could not start at a high level
* SubGhz: subghz_worker, add short duration filter setting
* SubGhz: capture raw timings in cli. Furi: clear pending interrupts on ISR set/reset
* SubGhz: fix start duration in furi_hal_subghz_start_async_rx
* [FL-3093] SubGhz: hopping issue in some regions
* [FL-3087] SubGhz: fix delete-ok issue
* SubGhz: remove copypasta from rx_raw cli command
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2023-02-08 22:20:42 +09:00
Victor
5458157924
Added external CC1101 support
2023-02-02 22:47:50 +03:00
MX
6d368c3e3a
Merge branch 'fz-dev' into dev
2022-12-26 22:42:21 +03:00
Georgii Surkov
8582670a34
[FL-2811] Fix PVS-Studio warnings ( #2142 )
...
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
2022-12-26 21:13:30 +09:00
MX
7829428455
Merge branch 'fz-dev' into dev
2022-11-23 19:21:50 +03:00
Kyhwana Pardus
1c8451fad4
Fix typos in subghz_cli.c ( #2030 )
...
Fix up the "receive" typos
Co-authored-by: あく <alleteam@gmail.com>
2022-11-23 22:23:11 +09:00
Skorpionm
9a9abd59e9
[FL-2904, FL-2900, FL-2890] WS: add app WeatherStation ( #1833 )
...
* WeatherStation: start
* SubGhz: rename protocol magellen -> magellan
* WeatherStation: err Unresolved symbols: {'subghz_protocol_decoder_base_get_string'}
* WeatherStation: fix Unresolved symbols: {'subghz_protocol_decoder_base_get_string'}
* Subghz: add set protocol_items
* WeatherStation: adding your protocols
* WS: add Infactory protocol
* WS: add history
* WS: add setting
* WS: add lock
* WS: add hopper frequency
* WS: fix history
* WS fix string_t -> FuriString*
* WS: add images
* WS: history record update when receiving data from the sensor again
* WS: add receiver info, delete extra code
* WS: add protocol ThermoPRO_TX4
* [FL-2900] SubGhz: Move icons in Sub-GHz
* WS: add Notification
* [FL-2890] SubGhz: Rename *_user files in resources to _user.example
* WS: add about scene
* WS: removing redundant code
* WS: add protocol Nexus-TH
* WS: add protocol GT_WT03
* WS: fix notification and rename "Weather Station" -> "Read Weather Station"
* SubGhz: partial unit tests fix
* SubGhz: fix unit_test
* SubGhz: remove dead code
* SubGhz: rename SubGhzPresetDefinition into SubGhzRadioPreset, cleanup subghz types.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-10-20 02:27:26 +09:00
MX
84d12da45a
add app WeatherStation
...
OFW PR 1833 by Skorpionm
2022-10-18 19:51:44 +03:00
MX
bdd052937b
Merge branch 'fz-dev' into dev
2022-10-07 17:24:20 +03:00
Sergey Gavrilov
4000f0cac5
[FL-2870] Printf function attributes ( #1841 )
...
* Furi strings: printf attribute
* Logs: printf attribute
* Plugins: adapt
* Plugins: accommodate
* Unit tests: accommodate
Co-authored-by: あく <alleteam@gmail.com>
2022-10-07 22:35:15 +09:00
Sergey Gavrilov
38a82a1907
[FL-2839] Furi stream buffer ( #1834 )
...
* Core: stream buffer
* stream buffer: API and usage
* stream buffer: documentation
* stream buffer: more documentation
* Furi: fix spelling
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-10-07 21:27:11 +09:00
MX
c60bfbf271
oh no
2022-10-05 21:27:13 +03:00
MX
0796263e81
Merge branch 'fz-dev' into dev
2022-10-05 19:27:46 +03:00
Sergey Gavrilov
4bf29827f8
M*LIB: non-inlined strings, FuriString primitive ( #1795 )
...
* Quicksave 1
* Header stage complete
* Source stage complete
* Lint & merge fixes
* Includes
* Documentation step 1
* FBT: output free size considering BT STACK
* Documentation step 2
* py lint
* Fix music player plugin
* unit test stage 1: string allocator, mem, getters, setters, appends, compare, search.
* unit test: string equality
* unit test: string replace
* unit test: string start_with, end_with
* unit test: string trim
* unit test: utf-8
* Rename
* Revert fw_size changes
* Simplify CLI backspace handling
* Simplify CLI character insert
* Merge fixes
* Furi: correct filenaming and spelling
* Bt: remove furi string include
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-10-06 00:15:23 +09:00
MX
3fbaad1488
Merge branch 'fz-dev' into dev
2022-09-14 21:04:04 +03:00
SG
b9a766d909
[FL-2627] Flipper applications: SDK, build and debug system ( #1387 )
...
* Added support for running applications from SD card (FAPs - Flipper Application Packages)
* Added plugin_dist target for fbt to build FAPs
* All apps of type FlipperAppType.EXTERNAL and FlipperAppType.PLUGIN are built as FAPs by default
* Updated VSCode configuration for new fbt features - re-deploy stock configuration to use them
* Added debugging support for FAPs with fbt debug & VSCode
* Added public firmware API with automated versioning
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
2022-09-15 02:21:03 +09:00
SG
873e1f114b
[FL-2627] Flipper applications: SDK, build and debug system ( #1387 )
2022-09-15 01:11:38 +09:00
