* Active RPC session icon
* Add RpcOwner, don't show the RPC icon when the session was started from BLE
* Fix rpc_test and f18 api
* Bump API version
Co-authored-by: あく <alleteam@gmail.com>
* Improve RNG error handling
* Sync RTC shadow registers on Stop mode exit
* Implement working STOP2 mode
* Fix formatting
* FuriHal: disable SWD pins if debug is disabled
* Power: cleanup battery info view, handle zero current report from gauge
* Fbt: add command line argument for extra global defines
* FuriHal: cleanup debug defines in power and os, drop deep_insomnia counter.
* Add a setting to disable deep sleep
* Clean up furi_hal_power
* FuriHal,FapLoader,Debug: implement debug in stop mode, workaround resume in stop
* FuriHal: document OS and power subsystems debugging
* Furi: enable debug interface on crash
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Canvas with rotation
* Full icon rotation, cleanup of unused resources
* F18 API update
* Bitmap draw cleanup
* More cleaning up
* Migrate recovery and DFU to canvas
* Make the internal draw function static
* Remove all calls to u8g2_DrawXBM
Co-authored-by: あく <alleteam@gmail.com>
* Furi: more gpio checks in HAL
* Nfc: do not spawn service thread if it is already spawned
Co-authored-by: Sergey Gavrilov <who.just.the.doctor@gmail.com>
* Core, Thread: mark thread to join from prvDeleteTCB
* USB HAL: move vars to MEM2
* Core, Thread: cleanup sources
* Cli: add magic delays on rx pipe error, prevent cli from consuming processor time
* Furi: update thread documentation
Co-authored-by: あく <alleteam@gmail.com>
* Separate ibutton to its own module, add one_wire to f18
* Move onewire cli to a separate app
* Add definitions for normal and overdrive timings
* Update api definitions
* Add rough overdrive timings definition for onewire emulation
* Remove one_wire_host_timing.h
* Add rough overdrive timings for onewire host
* Improve overdrive mode
* Working overdrive mode from flipper to flipper
* Update thermometer example app
* Turn on otg power when running thermometer example app
* Implement reset overdrive switching
* Always exit out of overdrive mode
* Improve overdrive timings
* Fix typos
* Fix reset behaviour
* Use overdrive mode everywhere in DS1996
* Improve comments
* Bump API version
Co-authored-by: あく <alleteam@gmail.com>
* BadUSB: remove unused out EP
* BadUSB: do not use iad for a single interface
* BadUSB: implement the boot protocol
* BadUSB: implement SET_PROTOCOL
* Improve HID report descriptor readability
* CODEOWNERS update
Co-authored-by: nminaylov <nm29719@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
No issues was found during my own testing and running sd benchmarks, sorry for rushing, I may miss something, usually I prefer to wait for official review
* NFC: Support reading Mifare Classic key B from sector trailer and reusing it for other sectors
* NFC: Fix my pointer typo
* NFC: Fix reading sector with B key where A key can't read block (fixes#2413) and fix Nfc Magic app not using NFC folder by default (in file select)
* NFC: Fix strange bug
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
The recent SD rewrite dropped a couple of lines from the CID parsing
function resulting in zero manufacturing date displayed.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* Temporary get Metakom and Cyfral keys out of the way
* Better enum name
* Syncing work, does not compile
* Syncing work, now compiles
* Working read impl for DS1990 and DS1992
* Add the ability to display extended key data
* Get rid of DialogEx
* Add save and load API
* Better iButtonKey encapsulation
* Fix crash
* Load key code boilerplate
* More load key code boilerplate
* Minor code cleanup
* Implement loading and saving DS1990 keys
* Implement the Info scene
* Implement loading & saving for DS1992
* Implement read error scene stub
* Implement delete confirmation screen
* Better error messages (protocol-dependent)
* Minor old code cleanup
* Remove iButtonDevice, add command callback to iButtonSlave
* Implement draft emulation for DS1990
* Better emulation for DS1990
* Initial emulation implementation for DS1992
* Better common command definitions
* Use common submenu callback, add protocol list
* Improve ViewData screen
* Improve scene_add_type
* Add stubs for write functionality
* Improve naming consistency
* Implement writing a DS1992 onto another one
* Improve DS1992 write code
* Improve DS1992 write code once more
* Prepare write_blank for DS1990, delete ibutton_writer
* Implement writing DS1990 onto blanks
* Fix reading DS1990
* Partially implement writing DS1992 onto blanks
* Implement GUI for writing keys
* Implement GUI for emulating keys
* Reduce memory usage for pretty_format
* Automatically truncate data more than 256 bytes
* Initial implementation of DS1996 (not tested)
* Fix crash due to missing virtual function
* Improve emulation code
* Improve DS1992 emulation code
* Correct return value for onewire_slave_send
* Correct return value for onewire_slave_receive
* Implement emulation for DS1992 & DS1996
* Better constant names
* Simplify & optimise the emulation code
* Remove duplicate code
* Add skip rom command emulation
* Show loading animation for large keys
* Implement manual adding & editing of keys
* Use buffered file streams to speed up saving & loading
* Reset key name before adding a new one
* Sync a buffered file stream before saving
* Use the DSGeneric protocol as a fallback option
* Implement emulation via RPC
* Refactor iButton code in preparation for comparator keys
* Refactor iButton code in preparation for comparator keys once more
* Make some functions static
* Make protocols not rely on one_wire classes
* Improve ProtocolDict usage
* Improve ProtocolDict usage more
* Implement reading Metakom & Cyfral keys
* Rename some files
* Better file structure
* Implement a unified interface for misc protocols
* Implement a unified interface for dallas protocols
* Concrete types for Dallas protocols
* Implement a unified interface for all key types
* Improved type naming
* Improved private types
* Proper types in protocol definitions
* Implement emulation for Cyfral & Metakom keys
* Implement save&load for Metakom & Cyfral keys
* Better type names
* Rename files, better names
* Allocate iButtonProtocols like a normal class
* Reset the key each time the start scene is selected
* Improve comments and constants
* Add ibutton_protocols to SDK headers
* Add ibutton_key to SDK headers
* Add ibutton_key to SDK headers
* Implement reading via cli
* Implement emulation via cli
* Implement writing Dallas blanks via cli
* Correctly revert the editing if cancelled by the user
* Correct committing mishap
* Elide the long text on the info screen
* Change key name for data in Misc keys
* Update iButtonFileFormat.md
* Remember the key's folder
* Save menu position in ReadKeyMenu and SavedKeyMenu
* Correct use of preselected path in file browser
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Threads: application id
* Unit tests: appsdata getter test
* Unit tests: moar test cases for appsdata getter
* Unit tests: remove folders after test
* Storage: dir_is_exist, migrate, + unit_tests
* Plugins: migration
* Storage: common_exists, moar unit_tests 4 "common_migrate", "common_migrate" and "common_merge" bugfixes
* Storage: use FuriString for path handling
* Storage API: send caller thread id with path
* Storage: remove StorageType field in storage file list
* Storage: simplify processing
* Storage API: send caller thread id with path everywhere
* Storage: /app alias, unit tests and path creation
* Storage, path helper: remove unused
* Examples: app data example
* App plugins: use new VFS path
* Storage: file_info_is_dir
* Services: handle alias if the service accepts a path.
* App plugins: fixes
* Make PVS happy
* Storage: fix storage_merge_recursive
* Storage: rename process_aliases to resolve_path. Rename APPS_DATA to APP_DATA.
* Apps: use predefined macro instead of raw paths. Example Apps Data: README fixes.
* Storage: rename storage_common_resolve_path to storage_common_resolve_path_and_ensure_app_directory
* Api: fix version
* Storage: rename alias message
* Storage: do not create app folders in path resolving process in certain cases.
---------
Co-authored-by: Astra <93453568+Astrrra@users.noreply.github.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal, Power, UnitTests: rename battery charge voltage limit API
* FuriHal: bump API, power info major versions
* Power: fix battery charge voltage limit for > 7.935v
Co-authored-by: あく <alleteam@gmail.com>
* Re-init NFC when starting the worker
* FuriHal: cleanup nfc init/deinit sequence
* FuriHal: a little bit more defensive nfc init
Co-authored-by: あく <alleteam@gmail.com>
BUG: Now sound works but sending signal with sound on doesn't actually send signal!!!
Need to return previous implementation with 2 channel Timer or find another way
* SubGhz: add protocol DataRAW (binarization of data quantized by the minimum correlated duration)
* SubGhz: fix name history
* SubGhz: add encoder Data_RAW protocol
* SubGhz: decreasing the size of the LevelDuration structure
* SubGhz: history, added check that there is free RAM
* SubGhz: checking for free memory, support to pass without gap
* SubGhz: add running average to average the result, auto cut noise at the end of a burst
* SubGhz: support for repeating sequences
* SubGhz: fix secplus_v2 decoder
* SubGhz: bin_RAW fix add history
* SubGhz: add debug
* SubGhz: debug refactoring
* FURI_LOG: add FURI_LOG_RAW_x formatted string output like printf
* SubGhz: fix new FURI_LOG metod
* FURI_LOG: fix unit test
* SubGhz: add enable/disable BinRAW protocol decoding
* SubGhz: fix PVS
* SubGhz: forcibly turn off the speaker when exiting SubGhz
* SubGhz: adaptive adjustment to the noise level
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Fix recording RAW files, sometimes could not start at a high level
* SubGhz: subghz_worker, add short duration filter setting
* SubGhz: capture raw timings in cli. Furi: clear pending interrupts on ISR set/reset
* SubGhz: fix start duration in furi_hal_subghz_start_async_rx
* [FL-3093] SubGhz: hopping issue in some regions
* [FL-3087] SubGhz: fix delete-ok issue
* SubGhz: remove copypasta from rx_raw cli command
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* custom font set function
* update API symbols
* add example of custom font usage
* delete u8g2 dependency in example custom font
* rename to canvas_set_custom_u8g2_font
* now change the name in ALL places
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Fix formatting
* Fix PVS-studio warnings
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* FuriHal: move furi_hal_gpio_get_ext_pin_number to resources
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* get rid of BSP layer
* sector_cache: init in any case
* new sd-spi driver: init
* Delete stm32_adafruit_sd.c.old
* Delete spi_sd_hal.c.old
* Storage: faster api lock primitive
* Threads: priority control
* Flags: correct error code
* Spi: dma mode
* SD-card: use DMA for big blocks of SPI data
* Fix wrong SD_TOKEN_START_DATA_MULTIPLE_BLOCK_WRITE value
* do not memset cache if it is NULL
* remove top-level timeouts
* sd hal: disable debug
* Furi HAL: DMA
* Furi HAL RFID: use furi_hal_dma
* Furi HAL DMA: tests
* Furi HAL DMA: docs
* rollback "Furi HAL RFID: use furi_hal_dma"
* 4 channels taken from DMA manager for core HAL.
* Furi HAL DMA: live fast, die young
* RPC tests: increase message buffer
* SPI HAL: use second DMA instance
* sd hal: new CID getter
* SPI hal: use non-DMA version if kernel is not running
* IR hal: generalize DMA definition
* storage: add CID data to sd info
* RFID hal: generalize DMA definition
* SUBGHZ hal: generalize DMA definition. Core hal moved to DMA2.
* Storage: small optimizations, removal of extra mutex
* Storage: redundant macro
* SD hal: more timeouts
* SPI hal: DMA init
* Target: make furi_hal_spi_dma_init symbol private
* Update F18 api symbols
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* First part of multitarget porting
* Delete firmware/targets/f7/Inc directory
* Delete firmware/targets/f7/Src directory
* gpio: cli fixes; about: using version from HAL
* sdk: path fixes
* gui: include fixes
* applications: more include fixes
* gpio: ported to new apis
* hal: introduced furi_hal_target_hw.h; libs: added one_wire
* hal: f18 target
* github: also build f18 by default
* typo fix
* fbt: removed extra checks on app list
* api: explicitly bundling select mlib headers with sdk
* hal: f18: changed INPUT_DEBOUNCE_TICKS to match f7
* cleaned up commented out code
* docs: added info on hw targets
* docs: targets: formatting fixes
* f18: fixed link error
* f18: fixed API version to match f7
* docs: hardware: minor wording fixes
* faploader: added fw target check
* docs: typo fixes
* github: not building komi target by default
* fbt: support for `targets` field for built-in apps
* github: reworked build flow to exclude app_set; fbt: removed komi-specific appset; added additional target buildset check
* github: fixed build; nfc: fixed pvs warnings
* attempt to fix target id
* f7, f18: removed certain HAL function from public API
* apps: debug: enabled bt_debug_app for f18
* Targets: backport input pins configuration routine from F7 to F18
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Furi: make `furi_is_irq_context` public
* Furi: proper name and documentation for furi_kernel_is_irq_or_masked.
* Target: bump symbol table version
* Furi: proper doxygen context for warnings
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Better Infrared protocol file structure
* Rename InfraredProtocolSpec to InfraredProtocolVariant
* Slightly better names
* Add repeat count field to protocol variant description
* Repeat the signal the appropriate number of times when brute-forcing
* Repeat the signal the appropriate number of times when sending via worker
* Better signal count logic in infrared_transmit
* Better variable names
* Convert some raw signals to messages in tv.ir
Co-authored-by: あく <alleteam@gmail.com>
* Toolbox: add seek to character stream method. UpdateUtils: reverse manifest iterator. UnitTests: more unit tests.
* Target: bump API version. Updater: delete empty folders from manifest before resource deployment.
* UnitTests: use manifest from unit_tests folder instead of global one
* Make PVS happy
* sector cache: allocate always
* Better PVS config for manifest.c
* PVS: Move exception outside of condition
* PVS: remove confusing condition
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Change the wording in the headers
* Add support for text in the progress bar
* New MFC key bruteforce screen
* Typo fix
* nfc: rename Flipper Dict to System Dict
* elements: fix types
* Display the correct key attack sector
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
SubGHz app launch times improved, also setting_user file no longer added by firmware, this update will remove this file, be sure to backup!
Now this file is actually should be created by user and will be not removed every update!
* SubGhz: fix RAW "Send never ends"
* SubGhz: delete comments
* SubGhz: RAW file parsing speed increase
* SubGhz: fix level_duration_is_wait
* SubGhz: modification furi_hal_subghz_async_tx_refill
* SubGhz: furi_hal_subghz_stop_async_rx
* SubGhz: hal unit test and better async tx yield handling
* FuriHal: proper async tx end in subghz, vibro on power off
* FuriHal: variable naming in subghz
* SubGhz,FuriHal: extreme timings in subghz hal unit tests, remove memset in async tx buffer fill routine
* FuriHal: small refinements in subghz
Co-authored-by: あく <alleteam@gmail.com>
* Update protobuf definitions
* Add Property subsystem entry point function
* Key-based system info and power info function stubs
* Remove unneeded functions
* Working power info
* Working system info
* Replace #defines with string literals
* Remove unneeded field
* Simplify system info formatting
* Refactor output callback handling
* Handle the last info element correctly
* Optimise power info, rename methods
* Add comments
* Add power debug
* Remove unneeded definitions
* Rename some files and functions
* Update protobuf definitions
* Implement App GetError and DataExchange APIs
* Send GetErrorReply with correct command_id
* Add RPC debug app stub
* Add more scenes
* Add warning, increase stack size
* Add receive data exchange scene
* Improve data exchange
* Add notifications
* Update application requirements
* Bump format version for property-based infos
* Correctly reset error text
* RCP: sync protobuf repo to latest release tag
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: MFUL minor cleanup
* nfc: Add mechanism to pass event data
* nfc: Add NTAG authentication event to emulation
* nfc: Rename enum member to align with existing convention
* nfc: Add function to determine whether MFUL is fully captured
* nfc: Fix emulation of incompletely-read password-protected MFUL
* nfc: Add reader password capture scene
* nfc: Set default MFUL password input to 0xFFFFFFFF
* nfc: Fix MFUL auth counter loading
* nfc: Be explicit about using manual auth method when using auto unlock
* nfc: Fill in MFUL has_auth when loading file
* nfc: Fix MFUL auth success usage, remove unused variable
* nfc: Display PWD and PACK in MFUL info if available
* nfc: Remove unnecessary include
* nfc: Add unlock options to loaded MFUL menu
* nfc: Move set default MFUL password. This way it can be edited if needed instead of reentered
* nfc: Fix unlock menu not maintaining selection index
* nfc: Move captured MFUL auth data from worker to device data
* nfc: Attempt to authenticate with default PWD when possible when reading NTAG
* nfc: Don't try to auth NTAG on read if we already authed
* nfc: Add title for all pages read but failed auth for NTAG auth
* nfc: Add faster auth callback patch
* lib: Remove scons submodule from index
* nfc: Revise MFUL unlock UI flow
* nfc: Disallow MFUL unlock with reader if card not read yet. Trying to read first results in either needing to make a new scene or badly jury rigging other scenes, so let's just not do that
* f7: Bump API symbols
* Format code
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Core: thread alloc+set shortcut
* Apps: use thread allocation shortcut
* Mark some service threads as services
* Init BT as soon as possible
Co-authored-by: あく <alleteam@gmail.com>
* Gui: refactor buttons remapping
Instead of calling 3 separate functions with a ton of switch/case statements,
use a 2-dimensional lookup table to remap buttons based on the orientation.
* Gui: cleanup input mapping and fix incorrect asserts
* SnakeGame: handle input special case
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* WS: add protocol Acurite-606TX
* WS: history, added display of the channel (if any) in the general list
* WS: added display of the button state if it is on the transmitter, and displaying the data that is in the signal
* WS: fix batt info
* WS: add protocol LaCrosse_TX141THBv2
* WS; fix syntax
* Furi: bump api_symbols version
Co-authored-by: あく <alleteam@gmail.com>
