* Listener log level changed to Trace
* Show pages count without pwd pages in case of no auth success
* Fixed unit tests
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Furi: remove direct FreeRTOS timers use
* Furi: eliminate FreeRTOS headers leak. What did it cost? Everything...
* SubGhz: proper public api for protocols. Format Sources.
* Furi: slightly less redundant declarations
* Desktop: proper types in printf
* Sync API Symbols
* Furi: add timer reset and fix dolphin service, fix unit tests
* Furi: proper timer restart method naming and correct behavior in timer stopped state.
---------
Co-authored-by: hedger <hedger@nanode.su>
* Increase MF DESFire result buffer
* Ignore chunks that do not fit into the result buffer and show warning
* Display information about partial files
Co-authored-by: あく <alleteam@gmail.com>
* firmware: remove nfc lib build settings section
* furi hal nfc: fix nfc irq gpio deinit
* lib nfc: remove deprecated exception from sources
* nfc: use ASK demodulator in transparent mode
* mf ultralight: add upper page bound for NTAGI2C1K
* furi hal nfc: set event if nfc event was started
* nfc: fix PVS warnings
* lib signal reader: remove gpio pull setting in alloc
* furi: added math.h include for compatibility with existing apps
* nfc: remove resolved TODO in mf desfire poller
* bump api symbol version
Co-authored-by: hedger <hedger@nanode.su>
Co-authored-by: あく <alleteam@gmail.com>
"A long time ago in a galaxy far, far away...." we started NFC subsystem refactoring.
Starring:
- @gornekich - NFC refactoring project lead, architect, senior developer
- @gsurkov - architect, senior developer
- @RebornedBrain - senior developer
Supporting roles:
- @skotopes, @DrZlo13, @hedger - general architecture advisors, code review
- @Astrrra, @doomwastaken, @Hellitron, @ImagineVagon333 - quality assurance
Special thanks:
@bettse, @pcunning, @nxv, @noproto, @AloneLiberty and everyone else who has been helping us all this time and contributing valuable knowledges, ideas and source code.
* FuriHal: enable HSI in stop mode only if we use STOP0, proper SMPS selected clock assert
* Furi: fix double crash caused by bkpt use outside of debug session
* Libs: update ERC and MGG contrast
* Fix various crashes with LIB_DEBUG=1
* BadUsb: size_t where it should be and proper printf types
* Various fixes and make PVS happy
* FuriHal: proper CCID status and make PVS happy
* boot: update mode: graceful handling of corrupted stage file
---------
Co-authored-by: hedger <hedger@nanode.su>
* Storage: count opened files
* Storage: sd mount
* Storage: prompt to mount SD card if not mounted
* F18: update API
* F18: update API version
* Fix logger naming scheme
* Storage: storage_files_count -> storage_open_files_count
Co-authored-by: あく <alleteam@gmail.com>
* added filename mode setting
* added furi_flag checks for when filename_mode is set
* changed naming for ibutton, lfrfid and subghz
* requested changes from PR
* Lib: gather all naming bits and pieces under name generator module. Properly bump api version. FuriHal: fix RTC flag enum.
* PR requested changes
* bug fix for arg type
* added functionality for other application scenes
* Lib: cleanup name generator API, simplify usage. Sync API symbols.
* Lib: proper size type in name_generator. Cleanup.
* FuriHal: cleanup rtc api usage across firmware
Co-authored-by: あく <alleteam@gmail.com>
* NFC CLI: Fix multiple apdu commands from not working when one of them gives an empty response
* Make PVS happy
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: あく <alleteam@gmail.com>
* NFC: Fix key invalidation (again~)
* NFC: shouldn't be there
This code get called each time we check for B key
Co-authored-by: あく <alleteam@gmail.com>
* NFC: Improved MFC emulation on some readers
* NFC: Improved emulation on some readers (part 2): Some Android devices don't like this
* NFC: Improved emulation on some readers (part 3): I knew that during the emulation timings are critical, but one log breaks all...
* NFC: Improved emulation on some readers (part 4): Add fixes to Detect reader and refactor code
* NFC: Improved emulation on some readers (part 5)
* NFC: Improved emulation on some readers (part 6): GUI doesn't update without delay
* NFC: Improved emulation on some readers (part 7): Reworked emulation flow, some bug fixes and improvements
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* improve digital_signal for longer packets, also clean up code
* added SLIX2 specific features like signature and unknown keys (for issue #2781), added WRITE_PASSWORD handling
* fix NfcV AFI selection
* when NFCV_CMD_READ_MULTI_BLOCK reads beyond memory end, return the maximum possible block's content
* added SLIX2 reading
* fix NXP SYSTEMINFO response check size
* capture the first received password if none was set before
* clear stored data before reading SLIX details renamed slix2_dump functions to slix2_read
* display card block size values as decimal
Co-authored-by: あく <alleteam@gmail.com>
* I was outplayed by the C programming language
* Fix emulating empty keys as 0s
* Add exceptions for Detect Reader
* Sync api_symbols.csv for F18
* Outplayed by the C language [X2]
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* added support for ISO15693 (NfcV) emulation, added support for reading SLIX tags
* SLIX: fixed crash situation when an invalid password was requested
* ISO15693: show emulate menu when opening file
* rename NfcV emulate scene to match other NfcV names
* optimize allocation size for signals
* ISO15693: further optimizations of allocation and free code
* ISO15693: reduce latency on state machine reset
* respond with block security status when option flag is set
* increased maximum memory size to match standard
added security status handling/load/save
added SELECT/QUIET handling
more fine grained allocation routines and checks
fix memset sizes
* added "Listen NfcV Reader" to sniff traffic from reader to card
* added correct description to delete menu
* also added DSFID/AFI handling and locking
* increase sniff log size
* scale NfcV frequency a bit, add echo mode, fix signal level at the end
* use symbolic modulated/unmodulated GPIO levels
* honor AFI field, decrease verbosity and removed debug code
* refactor defines for less namespace pollution by using NFCV_ prefixes
* correct an oversight that original cards return an generic error when addressing outside block range
* use inverse modulation, increasing readable range significantly
* rework and better document nfc chip initialization
* nfcv code review fixes
* Disable accidentally left on signal debug gpio output
* Improve NFCV Read/Info GUIs. Authored by @xMasterX, committed by @nvx
* Fix crash that occurs when you exit from NFCV emulation and start it again. Authored by @xMasterX, committed by @nvx
* Remove delay from emulation loop. This improves compatibility when the reader is Android.
* Lib: digital signal debug output pin info
Co-authored-by: Tiernan Messmer <tiernan.messmer@gmail.com>
Co-authored-by: MX <10697207+xMasterX@users.noreply.github.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: add bus abstraction and port some subsystem to it
* Make PVS happy, cleanup code
* Update API symbols for f18
* F18: backport bus changes from f7
* Revert to STOP2 sleep mode
* Fix downgrading the firmware via updater
* Port iButton TIM1 to furi_hal_bus
* Port Infrared TIM1 and TIM2 to furi_hal_bus
* Just enable the timer bus
* Port furi_hal_pwm to bus API
* Fix include statement
* Port furi_hal_rfid to bus API
* Port furi_hal_subghz and others to bus API
* Remove unneeded include
* Improve furi_hal_infrared defines
* Reset LPTIM1 via furi_hal_bus API
* Crash when trying to enable an already enabled peripheral
* Better defines
* Improved checks
* Lots of macro wrappers
* Copy spi changes for f18
* Fix crashes in LFRFID system
* Fix crashes in NFC system
* Improve comments
* Create FuriHalBus.md
* Update FuriHalBus.md
* Fix crash when launching updater
* Documentation: couple small fixes in FuriHalBus
* FuriHal: fix copypaste in furi_hal_rfid_tim_reset
* FuriHal: reset radio core related peripherals on restart
* FuriHalBus: is enabled routine and bug fix for uart
* RFID HAL: accomodate furi hal bus
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Implement support for reading Opal card (Sydney, Australia)
* stub_parser_verify_read: used UNUSED macro
* furi_hal_rtc: expose calendaring as functions
* opal: use bit-packed struct to parse, rather than manually shifting about
* Update f18 api symbols
Co-authored-by: あく <alleteam@gmail.com>
* nfc: Add Mifare Ultralight C detection
* nfc: Add display name for MFUL C and hide menu items
MFUL C unlock and emulation currently not supported, so hide from menu
if current card is MFUL C
* nfc: Also check response when probing 3DES auth
* nfc: Hide emulate option in saved menu for MFUL if not supported
* nfc: Remove unlock options from saved menu if Ultralight C
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* NFC: Support reading Mifare Classic key B from sector trailer and reusing it for other sectors
* NFC: Fix my pointer typo
* NFC: Fix reading sector with B key where A key can't read block (fixes#2413) and fix Nfc Magic app not using NFC folder by default (in file select)
* NFC: Fix strange bug
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Re-init NFC when starting the worker
* FuriHal: cleanup nfc init/deinit sequence
* FuriHal: a little bit more defensive nfc init
Co-authored-by: あく <alleteam@gmail.com>
* First part of multitarget porting
* Delete firmware/targets/f7/Inc directory
* Delete firmware/targets/f7/Src directory
* gpio: cli fixes; about: using version from HAL
* sdk: path fixes
* gui: include fixes
* applications: more include fixes
* gpio: ported to new apis
* hal: introduced furi_hal_target_hw.h; libs: added one_wire
* hal: f18 target
* github: also build f18 by default
* typo fix
* fbt: removed extra checks on app list
* api: explicitly bundling select mlib headers with sdk
* hal: f18: changed INPUT_DEBOUNCE_TICKS to match f7
* cleaned up commented out code
* docs: added info on hw targets
* docs: targets: formatting fixes
* f18: fixed link error
* f18: fixed API version to match f7
* docs: hardware: minor wording fixes
* faploader: added fw target check
* docs: typo fixes
* github: not building komi target by default
* fbt: support for `targets` field for built-in apps
* github: reworked build flow to exclude app_set; fbt: removed komi-specific appset; added additional target buildset check
* github: fixed build; nfc: fixed pvs warnings
* attempt to fix target id
* f7, f18: removed certain HAL function from public API
* apps: debug: enabled bt_debug_app for f18
* Targets: backport input pins configuration routine from F7 to F18
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* NFC: fix creating MF Classic cards from "Add Manually" menu (BCC calculation and AQTA/SAK writing)
* NFC: Fix BCC/SAK/ATQA in unit_tests and SAK in nfc_generate_mf_classic
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* NFC: add MIFARE MINI support
* Move new value to end of enum
* nfc: added missing unit test
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Fix sector reads when one block is unreadable
* Auth on the correct block instead of first
* Fix in sector reader as well
* Apply patch by @gornekich
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Change the wording in the headers
* Add support for text in the progress bar
* New MFC key bruteforce screen
* Typo fix
* nfc: rename Flipper Dict to System Dict
* elements: fix types
* Display the correct key attack sector
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
