* cubewb: downgraded to v1.15.0
* hal: updated f18 symbols to match LL
* hal: flash: use furi_hal_cortex_timer for timeouts
* scripts: fixed cube version validation from config file
* hal: flash: added 3 seconds timeout when waiting for C2 to unlock flash controller. On timeout, triggers furi_check
* nfc: fixed missing interrupt setup on multiple platformSetIrqCallback() invocations
* hal: gpio: don't trigger furi_check on furi_hal_gpio_add_int_callback() with same parameters
* Reverted NFC fixes - will be in a separate PR
* scripts: storage: fixed exception handler for paths
* Improve RNG error handling
* Sync RTC shadow registers on Stop mode exit
* Implement working STOP2 mode
* Fix formatting
* FuriHal: disable SWD pins if debug is disabled
* Power: cleanup battery info view, handle zero current report from gauge
* Fbt: add command line argument for extra global defines
* FuriHal: cleanup debug defines in power and os, drop deep_insomnia counter.
* Add a setting to disable deep sleep
* Clean up furi_hal_power
* FuriHal,FapLoader,Debug: implement debug in stop mode, workaround resume in stop
* FuriHal: document OS and power subsystems debugging
* Furi: enable debug interface on crash
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Furi: more gpio checks in HAL
* Nfc: do not spawn service thread if it is already spawned
Co-authored-by: Sergey Gavrilov <who.just.the.doctor@gmail.com>
* Core, Thread: mark thread to join from prvDeleteTCB
* USB HAL: move vars to MEM2
* Core, Thread: cleanup sources
* Cli: add magic delays on rx pipe error, prevent cli from consuming processor time
* Furi: update thread documentation
Co-authored-by: あく <alleteam@gmail.com>
* BadUSB: remove unused out EP
* BadUSB: do not use iad for a single interface
* BadUSB: implement the boot protocol
* BadUSB: implement SET_PROTOCOL
* Improve HID report descriptor readability
* CODEOWNERS update
Co-authored-by: nminaylov <nm29719@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
No issues was found during my own testing and running sd benchmarks, sorry for rushing, I may miss something, usually I prefer to wait for official review
* FuriHal, Power, UnitTests: rename battery charge voltage limit API
* FuriHal: bump API, power info major versions
* Power: fix battery charge voltage limit for > 7.935v
Co-authored-by: あく <alleteam@gmail.com>
* Re-init NFC when starting the worker
* FuriHal: cleanup nfc init/deinit sequence
* FuriHal: a little bit more defensive nfc init
Co-authored-by: あく <alleteam@gmail.com>
BUG: Now sound works but sending signal with sound on doesn't actually send signal!!!
Need to return previous implementation with 2 channel Timer or find another way
* SubGhz: Fix recording RAW files, sometimes could not start at a high level
* SubGhz: subghz_worker, add short duration filter setting
* SubGhz: capture raw timings in cli. Furi: clear pending interrupts on ISR set/reset
* SubGhz: fix start duration in furi_hal_subghz_start_async_rx
* [FL-3093] SubGhz: hopping issue in some regions
* [FL-3087] SubGhz: fix delete-ok issue
* SubGhz: remove copypasta from rx_raw cli command
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Fix formatting
* Fix PVS-studio warnings
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* FuriHal: move furi_hal_gpio_get_ext_pin_number to resources
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* get rid of BSP layer
* sector_cache: init in any case
* new sd-spi driver: init
* Delete stm32_adafruit_sd.c.old
* Delete spi_sd_hal.c.old
* Storage: faster api lock primitive
* Threads: priority control
* Flags: correct error code
* Spi: dma mode
* SD-card: use DMA for big blocks of SPI data
* Fix wrong SD_TOKEN_START_DATA_MULTIPLE_BLOCK_WRITE value
* do not memset cache if it is NULL
* remove top-level timeouts
* sd hal: disable debug
* Furi HAL: DMA
* Furi HAL RFID: use furi_hal_dma
* Furi HAL DMA: tests
* Furi HAL DMA: docs
* rollback "Furi HAL RFID: use furi_hal_dma"
* 4 channels taken from DMA manager for core HAL.
* Furi HAL DMA: live fast, die young
* RPC tests: increase message buffer
* SPI HAL: use second DMA instance
* sd hal: new CID getter
* SPI hal: use non-DMA version if kernel is not running
* IR hal: generalize DMA definition
* storage: add CID data to sd info
* RFID hal: generalize DMA definition
* SUBGHZ hal: generalize DMA definition. Core hal moved to DMA2.
* Storage: small optimizations, removal of extra mutex
* Storage: redundant macro
* SD hal: more timeouts
* SPI hal: DMA init
* Target: make furi_hal_spi_dma_init symbol private
* Update F18 api symbols
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* First part of multitarget porting
* Delete firmware/targets/f7/Inc directory
* Delete firmware/targets/f7/Src directory
* gpio: cli fixes; about: using version from HAL
* sdk: path fixes
* gui: include fixes
* applications: more include fixes
* gpio: ported to new apis
* hal: introduced furi_hal_target_hw.h; libs: added one_wire
* hal: f18 target
* github: also build f18 by default
* typo fix
* fbt: removed extra checks on app list
* api: explicitly bundling select mlib headers with sdk
* hal: f18: changed INPUT_DEBOUNCE_TICKS to match f7
* cleaned up commented out code
* docs: added info on hw targets
* docs: targets: formatting fixes
* f18: fixed link error
* f18: fixed API version to match f7
* docs: hardware: minor wording fixes
* faploader: added fw target check
* docs: typo fixes
* github: not building komi target by default
* fbt: support for `targets` field for built-in apps
* github: reworked build flow to exclude app_set; fbt: removed komi-specific appset; added additional target buildset check
* github: fixed build; nfc: fixed pvs warnings
* attempt to fix target id
* f7, f18: removed certain HAL function from public API
* apps: debug: enabled bt_debug_app for f18
* Targets: backport input pins configuration routine from F7 to F18
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: fix RAW "Send never ends"
* SubGhz: delete comments
* SubGhz: RAW file parsing speed increase
* SubGhz: fix level_duration_is_wait
* SubGhz: modification furi_hal_subghz_async_tx_refill
* SubGhz: furi_hal_subghz_stop_async_rx
* SubGhz: hal unit test and better async tx yield handling
* FuriHal: proper async tx end in subghz, vibro on power off
* FuriHal: variable naming in subghz
* SubGhz,FuriHal: extreme timings in subghz hal unit tests, remove memset in async tx buffer fill routine
* FuriHal: small refinements in subghz
Co-authored-by: あく <alleteam@gmail.com>
* Update protobuf definitions
* Add Property subsystem entry point function
* Key-based system info and power info function stubs
* Remove unneeded functions
* Working power info
* Working system info
* Replace #defines with string literals
* Remove unneeded field
* Simplify system info formatting
* Refactor output callback handling
* Handle the last info element correctly
* Optimise power info, rename methods
* Add comments
* Add power debug
* Remove unneeded definitions
* Rename some files and functions
* Update protobuf definitions
* Implement App GetError and DataExchange APIs
* Send GetErrorReply with correct command_id
* Add RPC debug app stub
* Add more scenes
* Add warning, increase stack size
* Add receive data exchange scene
* Improve data exchange
* Add notifications
* Update application requirements
* Bump format version for property-based infos
* Correctly reset error text
* RCP: sync protobuf repo to latest release tag
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Core: thread alloc+set shortcut
* Apps: use thread allocation shortcut
* Mark some service threads as services
* Init BT as soon as possible
Co-authored-by: あく <alleteam@gmail.com>
* Gui: refactor buttons remapping
Instead of calling 3 separate functions with a ton of switch/case statements,
use a 2-dimensional lookup table to remap buttons based on the orientation.
* Gui: cleanup input mapping and fix incorrect asserts
* SnakeGame: handle input special case
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* updater: remove files from existing resources Manifest file before deploying new resources
* toolbox: tar: single file extraction API
Co-authored-by: あく <alleteam@gmail.com>
* power: Also ask charger if charge done
* F7: bump API Symbols version
* Lib: remove double include in bq25896.c
Co-authored-by: あく <alleteam@gmail.com>
* updater: lowered logging level for resources unpacking; hal: implemented fast flash write mode
* hal: reworked fast flash programming; clearing most error flags on flash init; changed some flash functions return type from bool to void; scripts: fixed malformed CRC values in update bundles in certain cases;
* hal: flash: larger critical section
* hal: flash: enabling fast write inside critical section
* api_symbols: bump minor version
* Show error popup when NFC chip is not init/disconnected
* Move to dialogs for the error message
* Fix a memory leak and wrap the hal check
* F7: update api_symbols.csv, add furi_hal_nfc_is_init
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Added support for running applications from SD card (FAPs - Flipper Application Packages)
* Added plugin_dist target for fbt to build FAPs
* All apps of type FlipperAppType.EXTERNAL and FlipperAppType.PLUGIN are built as FAPs by default
* Updated VSCode configuration for new fbt features - re-deploy stock configuration to use them
* Added debugging support for FAPs with fbt debug & VSCode
* Added public firmware API with automated versioning
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
We search for ST25TB type cards, but not handling them being found.
As a result, such cards are detected as NFC-A with 8-byte UID, which lead
to read error on emulation attempt.
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* FuriHal: sram2 memory manager
* FuriHal: sram2 memory allocator
* FuriHal: allow NULL buffers for txrx in spi hal
* SD card: sector cache
* FuriHal: fix init in memory hal
* RPC: STARTUP instead SERVICE
* Memory: pool "free" command
* Thread: service can be statically allocated in a memory pool
Co-authored-by: あく <alleteam@gmail.com>
