When xTimerDelete is called using a dymanic timer handle, the timer
handle should immediately be considered unusable for any operation;
including checking if the timer is still running. Under high system
loads, that memory region may see fast reuse while furi_timer_free
is sleeping between timer active checks. That reuse could result in
memory at that pointer causing the timer active check to return true.
Rework the furi_timer_delete process (in the case of dynamically
allocated callback memory) to stop the timer, wait for it to stop,
free the memory, and then delete the timer. Timers without dynamically
allocated callback memory are just sent a delete command; no need
to stop it first.
Fixes: ff33bc6aea ("Furi: wait for timer wind down in destructor (#1716)")
Signed-off-by: Kris Bahnsen <Kris@KBEmbedded.com>
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* Implement basic external module detection and echo
* Update api symbols for f18
* Minimally working implementation (can create directory via rpc)
* Make expansion protocol parser a header-only library
* Rename a function
* Improve thread syncronisation
* Implement multi-packet transmissions
* Improve test application
* Clean up expansion worker code
* Send heartbeat when host is ready
* Update API symbols
* Add draft documentation
* Expansion worker: proper timeout and error handling
* Expansion worker: correct TX, do not disable expansion callback
* Expansion protocol: pc side test script
* PC side expansion test: trying to change baudrate
* Working comms between 2 flippers
* Cleaner exit from expansion worker thread
* Better checks
* Add debug logs
* Remove unneeded delays
* Use USART as default expansion port
* Refactor furi_hal_serial_control, fix crash
* Improve furi_hal abstraction, wait for stable rx pin
* Remove rogue include
* Set proper exit reason on RPC error
* Remove rogue comment
* Remove RX stability check as potentially problematic
* Improve expansion_test application
* Remove rogue define
* Give up on TODO
* Implement expansion protocol checksum support
* Update ExpansionModules.md
* RPC: reverse input
* Assets: sync protobuf
* Fix typos
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* Make expansion_test compile
* Remove unneeded file
* Make PVS-studio happy
* Optimise stack usage
* Optimise heap usage, improve api signature
* Fix typo
* Clean up code
* Update expansion_protocol.h
* Fix unit tests
* Add doxygen comments to expansion.h
* Update/add doxygen comments
* Update ExpansionModules.md
* Github: new global code owner
* FuriHal: naming in serial control
* Expansion: check mutex acquire return result
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* FuriHal: UART refactoring
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* FuriHalSerial: various improvements and PR review fixes
* FuriHal: proper ISR function signatures
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* Implement basic external module detection and echo
* Update api symbols for f18
* Minimally working implementation (can create directory via rpc)
* Make expansion protocol parser a header-only library
* Rename a function
* Improve thread syncronisation
* Implement multi-packet transmissions
* Improve test application
* Clean up expansion worker code
* Send heartbeat when host is ready
* Update API symbols
* Add draft documentation
* Expansion worker: proper timeout and error handling
* Expansion worker: correct TX, do not disable expansion callback
* Expansion protocol: pc side test script
* PC side expansion test: trying to change baudrate
* Working comms between 2 flippers
* Cleaner exit from expansion worker thread
* Better checks
* Add debug logs
* Remove unneeded delays
* Use USART as default expansion port
* Refactor furi_hal_serial_control, fix crash
* Improve furi_hal abstraction, wait for stable rx pin
* Remove rogue include
* Set proper exit reason on RPC error
* Remove rogue comment
* Remove RX stability check as potentially problematic
* Improve expansion_test application
* Remove rogue define
* Give up on TODO
* Implement expansion protocol checksum support
* Update ExpansionModules.md
* RPC: reverse input
* Assets: sync protobuf
* Fix typos
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* Make expansion_test compile
* Remove unneeded file
* Make PVS-studio happy
* Optimise stack usage
* Optimise heap usage, improve api signature
* Fix typo
* Clean up code
* Update expansion_protocol.h
* Fix unit tests
* Add doxygen comments to expansion.h
* Update/add doxygen comments
* Update ExpansionModules.md
* Github: new global code owner
* FuriHal: naming in serial control
* Expansion: check mutex acquire return result
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* FuriHal: UART refactoring
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* FuriHalSerial: various improvements and PR review fixes
* FuriHal: proper ISR function signatures
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* FuriHal: retry gauge/charger initialization
* FuriHal: lower logging level for flash known errata
* FuriHal: graceful fail if subghz chip is not working
* Furi: issue stop command even if timer is not active, document timer behavior
* Furi: remove direct FreeRTOS timers use
* Furi: eliminate FreeRTOS headers leak. What did it cost? Everything...
* SubGhz: proper public api for protocols. Format Sources.
* Furi: slightly less redundant declarations
* Desktop: proper types in printf
* Sync API Symbols
* Furi: add timer reset and fix dolphin service, fix unit tests
* Furi: proper timer restart method naming and correct behavior in timer stopped state.
---------
Co-authored-by: hedger <hedger@nanode.su>
* FuriHal: enable HSI in stop mode only if we use STOP0, proper SMPS selected clock assert
* Furi: fix double crash caused by bkpt use outside of debug session
* Libs: update ERC and MGG contrast
* Fix various crashes with LIB_DEBUG=1
* BadUsb: size_t where it should be and proper printf types
* Various fixes and make PVS happy
* FuriHal: proper CCID status and make PVS happy
* boot: update mode: graceful handling of corrupted stage file
---------
Co-authored-by: hedger <hedger@nanode.su>
* More descriptive error messages for the log command
* Log level description improvements
* Log help changes
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: allow nulling null isr
* FuriHal: include interrupt priority 15 as allowed
* Furi: prevent compiler from optimizing arg in r0 of RESTORE_REGISTERS_AND_HALT_MCU
* Lib: adjust default contrast for ERC displays
* Furi: various improvements in check module
* Format Sources
* FurHal: ble early hardfault detection
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
* fbt: added hooks for build & dist environments
* Moved env hooks to an optional file
* Fixed var name
* Added fw origin to device info
* Bumped device info version
* fbt: added FIRMWARE_ORIGIN option. Different implementation for FW_ORIGIN_* C macro.
* api: bumped versions
* fbt: added fbt_options_local.py
* gitignore: cleanup
Co-authored-by: あく <alleteam@gmail.com>
* Furi: properly handle thread free before TCB scrapping, add furi_free - more invasive version of free to memmgr. FuriHal: add DWT comparator api to cortex. Updater, RPC: refactor various thread shanenigans. Code cleanup.
* Rollback free macros and related changes
* hal: device_info: added API version to "firmware.api.major" & "firmware.api.minor"
* FuriHal: bump device info version
Co-authored-by: あく <alleteam@gmail.com>
* Improve RNG error handling
* Sync RTC shadow registers on Stop mode exit
* Implement working STOP2 mode
* Fix formatting
* FuriHal: disable SWD pins if debug is disabled
* Power: cleanup battery info view, handle zero current report from gauge
* Fbt: add command line argument for extra global defines
* FuriHal: cleanup debug defines in power and os, drop deep_insomnia counter.
* Add a setting to disable deep sleep
* Clean up furi_hal_power
* FuriHal,FapLoader,Debug: implement debug in stop mode, workaround resume in stop
* FuriHal: document OS and power subsystems debugging
* Furi: enable debug interface on crash
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Core, Thread: mark thread to join from prvDeleteTCB
* USB HAL: move vars to MEM2
* Core, Thread: cleanup sources
* Cli: add magic delays on rx pipe error, prevent cli from consuming processor time
* Furi: update thread documentation
Co-authored-by: あく <alleteam@gmail.com>
* Threads: application id
* Unit tests: appsdata getter test
* Unit tests: moar test cases for appsdata getter
* Unit tests: remove folders after test
* Storage: dir_is_exist, migrate, + unit_tests
* Plugins: migration
* Storage: common_exists, moar unit_tests 4 "common_migrate", "common_migrate" and "common_merge" bugfixes
* Storage: use FuriString for path handling
* Storage API: send caller thread id with path
* Storage: remove StorageType field in storage file list
* Storage: simplify processing
* Storage API: send caller thread id with path everywhere
* Storage: /app alias, unit tests and path creation
* Storage, path helper: remove unused
* Examples: app data example
* App plugins: use new VFS path
* Storage: file_info_is_dir
* Services: handle alias if the service accepts a path.
* App plugins: fixes
* Make PVS happy
* Storage: fix storage_merge_recursive
* Storage: rename process_aliases to resolve_path. Rename APPS_DATA to APP_DATA.
* Apps: use predefined macro instead of raw paths. Example Apps Data: README fixes.
* Storage: rename storage_common_resolve_path to storage_common_resolve_path_and_ensure_app_directory
* Api: fix version
* Storage: rename alias message
* Storage: do not create app folders in path resolving process in certain cases.
---------
Co-authored-by: Astra <93453568+Astrrra@users.noreply.github.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: add protocol DataRAW (binarization of data quantized by the minimum correlated duration)
* SubGhz: fix name history
* SubGhz: add encoder Data_RAW protocol
* SubGhz: decreasing the size of the LevelDuration structure
* SubGhz: history, added check that there is free RAM
* SubGhz: checking for free memory, support to pass without gap
* SubGhz: add running average to average the result, auto cut noise at the end of a burst
* SubGhz: support for repeating sequences
* SubGhz: fix secplus_v2 decoder
* SubGhz: bin_RAW fix add history
* SubGhz: add debug
* SubGhz: debug refactoring
* FURI_LOG: add FURI_LOG_RAW_x formatted string output like printf
* SubGhz: fix new FURI_LOG metod
* FURI_LOG: fix unit test
* SubGhz: add enable/disable BinRAW protocol decoding
* SubGhz: fix PVS
* SubGhz: forcibly turn off the speaker when exiting SubGhz
* SubGhz: adaptive adjustment to the noise level
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* get rid of BSP layer
* sector_cache: init in any case
* new sd-spi driver: init
* Delete stm32_adafruit_sd.c.old
* Delete spi_sd_hal.c.old
* Storage: faster api lock primitive
* Threads: priority control
* Flags: correct error code
* Spi: dma mode
* SD-card: use DMA for big blocks of SPI data
* Fix wrong SD_TOKEN_START_DATA_MULTIPLE_BLOCK_WRITE value
* do not memset cache if it is NULL
* remove top-level timeouts
* sd hal: disable debug
* Furi HAL: DMA
* Furi HAL RFID: use furi_hal_dma
* Furi HAL DMA: tests
* Furi HAL DMA: docs
* rollback "Furi HAL RFID: use furi_hal_dma"
* 4 channels taken from DMA manager for core HAL.
* Furi HAL DMA: live fast, die young
* RPC tests: increase message buffer
* SPI HAL: use second DMA instance
* sd hal: new CID getter
* SPI hal: use non-DMA version if kernel is not running
* IR hal: generalize DMA definition
* storage: add CID data to sd info
* RFID hal: generalize DMA definition
* SUBGHZ hal: generalize DMA definition. Core hal moved to DMA2.
* Storage: small optimizations, removal of extra mutex
* Storage: redundant macro
* SD hal: more timeouts
* SPI hal: DMA init
* Target: make furi_hal_spi_dma_init symbol private
* Update F18 api symbols
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Furi: make `furi_is_irq_context` public
* Furi: proper name and documentation for furi_kernel_is_irq_or_masked.
* Target: bump symbol table version
* Furi: proper doxygen context for warnings
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
