* Implement support for reading Opal card (Sydney, Australia)
* stub_parser_verify_read: used UNUSED macro
* furi_hal_rtc: expose calendaring as functions
* opal: use bit-packed struct to parse, rather than manually shifting about
* Update f18 api symbols
Co-authored-by: あく <alleteam@gmail.com>
* added DigitalSequence to chain multiple DigitalSignals
added PulseReader for hardware assisted digital signal sampling
* added send_time option to start a signal at a specific DWT->CYCCNT value
* fixed linter errors and undone function renaming
* fixed renaming
* flagged functions in api_symbols.csv
* allow gpio field to stay uninitialized in digital_signal_prepare_arr()
* fix test cases to match (expected) implementation
* pulse_reader: build as static library
Signed-off-by: g3gg0.de <git@g3gg0.de>
* fix starting level detection in pulse_reader
* added unit test for pulse_reader
* change pulse reader test timings to 1, 10 and 100 ms
* fine tuned timings for pulse_reader test
* pulse_reader_stop now deinits GPIO as recommended by @gornekich
* ran format_py
* pulse_reader: remove from API, allow to link with faps
Signed-off-by: g3gg0.de <git@g3gg0.de>
* remove unit test for pulse_reader again
* pulse_reader: add call to set GPIO pull direction
* make structures private, add C implementation of digital_signal_update_dma()
* digital_signal/pulse_reader: allow parameters for free to be NULL
* digital_signal: show unoptimized and optimized code for digital_signal_update_dma() next to each other
* pulse_reader: further optimize assembly code
* digital_signal: reduce code complexity of digital_signal_update_dma() by only reconfiguring DMA2
* digital_signal: remove assembly code, limiting the performance but increasing portability
* added recovery if the timer already expired
* digital_signal: fix memory leak
* digital_signal: keep lock until all DMA transfers have finished
* DigitalSequence: fix issues with concatenation of same levels and spurious bit flips
* DigitalSignal: use cyclic DMA buffer for sequences
* update api_symbols.csv
* Update api_symbols.csv for f18 target
* Patches from @gornekich to fix linter warnings.
* Remove some redundant if checks
* Remove some magic numbers and reformat.
* Remove forced terminating edge.
Signed-off-by: g3gg0.de <git@g3gg0.de>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: Tiernan Messmer <tiernan.messmer@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Furi: properly handle thread free before TCB scrapping, add furi_free - more invasive version of free to memmgr. FuriHal: add DWT comparator api to cortex. Updater, RPC: refactor various thread shanenigans. Code cleanup.
* Rollback free macros and related changes
* Loader: menu part
* Settings: remove unused loader api
* Desktop: get loader from record_open
* CLI: remove unneeded loader api
* gitignore: ignore .old files
* Loader: now really a service
* Loader: working service prototype
* Loader: cli, system start hooks
* CI/CD: make happy
* Loader: autorun
* Loader: lock and unlock
* Loader: rearrange code
* Gui, module menu: fix memleak
* Updater test: add timeout
* added update timeouts and max run duration
* Github: revert updater test workflow changes
* Loader: less missleading message in info cli command
Co-authored-by: doomwastaken <k.volkov@flipperdevices.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* hal: device_info: added API version to "firmware.api.major" & "firmware.api.minor"
* FuriHal: bump device info version
Co-authored-by: あく <alleteam@gmail.com>
* cubewb: downgraded to v1.15.0
* hal: updated f18 symbols to match LL
* hal: flash: use furi_hal_cortex_timer for timeouts
* scripts: fixed cube version validation from config file
* hal: flash: added 3 seconds timeout when waiting for C2 to unlock flash controller. On timeout, triggers furi_check
* nfc: fixed missing interrupt setup on multiple platformSetIrqCallback() invocations
* hal: gpio: don't trigger furi_check on furi_hal_gpio_add_int_callback() with same parameters
* Reverted NFC fixes - will be in a separate PR
* scripts: storage: fixed exception handler for paths
* Active RPC session icon
* Add RpcOwner, don't show the RPC icon when the session was started from BLE
* Fix rpc_test and f18 api
* Bump API version
Co-authored-by: あく <alleteam@gmail.com>
* Improve RNG error handling
* Sync RTC shadow registers on Stop mode exit
* Implement working STOP2 mode
* Fix formatting
* FuriHal: disable SWD pins if debug is disabled
* Power: cleanup battery info view, handle zero current report from gauge
* Fbt: add command line argument for extra global defines
* FuriHal: cleanup debug defines in power and os, drop deep_insomnia counter.
* Add a setting to disable deep sleep
* Clean up furi_hal_power
* FuriHal,FapLoader,Debug: implement debug in stop mode, workaround resume in stop
* FuriHal: document OS and power subsystems debugging
* Furi: enable debug interface on crash
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Canvas with rotation
* Full icon rotation, cleanup of unused resources
* F18 API update
* Bitmap draw cleanup
* More cleaning up
* Migrate recovery and DFU to canvas
* Make the internal draw function static
* Remove all calls to u8g2_DrawXBM
Co-authored-by: あく <alleteam@gmail.com>
* Separate ibutton to its own module, add one_wire to f18
* Move onewire cli to a separate app
* Add definitions for normal and overdrive timings
* Update api definitions
* Add rough overdrive timings definition for onewire emulation
* Remove one_wire_host_timing.h
* Add rough overdrive timings for onewire host
* Improve overdrive mode
* Working overdrive mode from flipper to flipper
* Update thermometer example app
* Turn on otg power when running thermometer example app
* Implement reset overdrive switching
* Always exit out of overdrive mode
* Improve overdrive timings
* Fix typos
* Fix reset behaviour
* Use overdrive mode everywhere in DS1996
* Improve comments
* Bump API version
Co-authored-by: あく <alleteam@gmail.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* Temporary get Metakom and Cyfral keys out of the way
* Better enum name
* Syncing work, does not compile
* Syncing work, now compiles
* Working read impl for DS1990 and DS1992
* Add the ability to display extended key data
* Get rid of DialogEx
* Add save and load API
* Better iButtonKey encapsulation
* Fix crash
* Load key code boilerplate
* More load key code boilerplate
* Minor code cleanup
* Implement loading and saving DS1990 keys
* Implement the Info scene
* Implement loading & saving for DS1992
* Implement read error scene stub
* Implement delete confirmation screen
* Better error messages (protocol-dependent)
* Minor old code cleanup
* Remove iButtonDevice, add command callback to iButtonSlave
* Implement draft emulation for DS1990
* Better emulation for DS1990
* Initial emulation implementation for DS1992
* Better common command definitions
* Use common submenu callback, add protocol list
* Improve ViewData screen
* Improve scene_add_type
* Add stubs for write functionality
* Improve naming consistency
* Implement writing a DS1992 onto another one
* Improve DS1992 write code
* Improve DS1992 write code once more
* Prepare write_blank for DS1990, delete ibutton_writer
* Implement writing DS1990 onto blanks
* Fix reading DS1990
* Partially implement writing DS1992 onto blanks
* Implement GUI for writing keys
* Implement GUI for emulating keys
* Reduce memory usage for pretty_format
* Automatically truncate data more than 256 bytes
* Initial implementation of DS1996 (not tested)
* Fix crash due to missing virtual function
* Improve emulation code
* Improve DS1992 emulation code
* Correct return value for onewire_slave_send
* Correct return value for onewire_slave_receive
* Implement emulation for DS1992 & DS1996
* Better constant names
* Simplify & optimise the emulation code
* Remove duplicate code
* Add skip rom command emulation
* Show loading animation for large keys
* Implement manual adding & editing of keys
* Use buffered file streams to speed up saving & loading
* Reset key name before adding a new one
* Sync a buffered file stream before saving
* Use the DSGeneric protocol as a fallback option
* Implement emulation via RPC
* Refactor iButton code in preparation for comparator keys
* Refactor iButton code in preparation for comparator keys once more
* Make some functions static
* Make protocols not rely on one_wire classes
* Improve ProtocolDict usage
* Improve ProtocolDict usage more
* Implement reading Metakom & Cyfral keys
* Rename some files
* Better file structure
* Implement a unified interface for misc protocols
* Implement a unified interface for dallas protocols
* Concrete types for Dallas protocols
* Implement a unified interface for all key types
* Improved type naming
* Improved private types
* Proper types in protocol definitions
* Implement emulation for Cyfral & Metakom keys
* Implement save&load for Metakom & Cyfral keys
* Better type names
* Rename files, better names
* Allocate iButtonProtocols like a normal class
* Reset the key each time the start scene is selected
* Improve comments and constants
* Add ibutton_protocols to SDK headers
* Add ibutton_key to SDK headers
* Add ibutton_key to SDK headers
* Implement reading via cli
* Implement emulation via cli
* Implement writing Dallas blanks via cli
* Correctly revert the editing if cancelled by the user
* Correct committing mishap
* Elide the long text on the info screen
* Change key name for data in Misc keys
* Update iButtonFileFormat.md
* Remember the key's folder
* Save menu position in ReadKeyMenu and SavedKeyMenu
* Correct use of preselected path in file browser
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* custom font set function
* update API symbols
* add example of custom font usage
* delete u8g2 dependency in example custom font
* rename to canvas_set_custom_u8g2_font
* now change the name in ALL places
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Fix formatting
* Fix PVS-studio warnings
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* FuriHal: move furi_hal_gpio_get_ext_pin_number to resources
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* get rid of BSP layer
* sector_cache: init in any case
* new sd-spi driver: init
* Delete stm32_adafruit_sd.c.old
* Delete spi_sd_hal.c.old
* Storage: faster api lock primitive
* Threads: priority control
* Flags: correct error code
* Spi: dma mode
* SD-card: use DMA for big blocks of SPI data
* Fix wrong SD_TOKEN_START_DATA_MULTIPLE_BLOCK_WRITE value
* do not memset cache if it is NULL
* remove top-level timeouts
* sd hal: disable debug
* Furi HAL: DMA
* Furi HAL RFID: use furi_hal_dma
* Furi HAL DMA: tests
* Furi HAL DMA: docs
* rollback "Furi HAL RFID: use furi_hal_dma"
* 4 channels taken from DMA manager for core HAL.
* Furi HAL DMA: live fast, die young
* RPC tests: increase message buffer
* SPI HAL: use second DMA instance
* sd hal: new CID getter
* SPI hal: use non-DMA version if kernel is not running
* IR hal: generalize DMA definition
* storage: add CID data to sd info
* RFID hal: generalize DMA definition
* SUBGHZ hal: generalize DMA definition. Core hal moved to DMA2.
* Storage: small optimizations, removal of extra mutex
* Storage: redundant macro
* SD hal: more timeouts
* SPI hal: DMA init
* Target: make furi_hal_spi_dma_init symbol private
* Update F18 api symbols
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* First part of multitarget porting
* Delete firmware/targets/f7/Inc directory
* Delete firmware/targets/f7/Src directory
* gpio: cli fixes; about: using version from HAL
* sdk: path fixes
* gui: include fixes
* applications: more include fixes
* gpio: ported to new apis
* hal: introduced furi_hal_target_hw.h; libs: added one_wire
* hal: f18 target
* github: also build f18 by default
* typo fix
* fbt: removed extra checks on app list
* api: explicitly bundling select mlib headers with sdk
* hal: f18: changed INPUT_DEBOUNCE_TICKS to match f7
* cleaned up commented out code
* docs: added info on hw targets
* docs: targets: formatting fixes
* f18: fixed link error
* f18: fixed API version to match f7
* docs: hardware: minor wording fixes
* faploader: added fw target check
* docs: typo fixes
* github: not building komi target by default
* fbt: support for `targets` field for built-in apps
* github: reworked build flow to exclude app_set; fbt: removed komi-specific appset; added additional target buildset check
* github: fixed build; nfc: fixed pvs warnings
* attempt to fix target id
* f7, f18: removed certain HAL function from public API
* apps: debug: enabled bt_debug_app for f18
* Targets: backport input pins configuration routine from F7 to F18
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
