* ble-glue: add on connect \ disconnect, on send \ received callbacks
* bt: rework service with furi-hal-bt and callbacks
* bt: update battery level on connect
* ble-glue: set one callback with parameters
* bt: rework callbacks, remove unused API
* ble-glue: remove dead code
* furi-hal-bt: add documentation
* ble-glue: apply changes for f7 target
* bt: rename RpcInstance -> Rpc
* ble: add disconnection reason
* ble: don't open bt record from GAP
* bt: fix RPC session close
* Assets: separate targets for icons and protobuf
Co-authored-by: あく <alleteam@gmail.com>
* ToolBox: add manchester-decoder and manchester-encoder
* SubGhz: add new FM config cc1101
* Subghz: add protocol Kia
* SubGhz: fix receiving the last packet Nero Radio
* SubGhz: app protocol CAME Twin (TW2EE/TW4EE)
* SubGhz: add protocol CAME Atomo (AT03EV/ AT04EV)
* F7: sync with F6
* SubGhz: add frequency analyzer
* SubGhz: remove space from file name
* SubGhz: frequency analyzer add filter and fix view
* [FL-1939] GubGhz: Frequency analyzer redesign
* SubGhz: fix incorrect subghz api call sequence in frequency analyzer worker
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: add charge suppress API.
* FuriHal: add guards to insomnia and charge suppress routines.
* FuriHal: proper API for scheduler in power.
* FuriHal: move charging control from critical section, fix deadlock.
* Gui: use FreeRTOS native timers controls for IconAnimation, fix crash on animation start stop
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission, decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config, add hardware signal processing less than 16 μs, add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets
Co-authored-by: あく <alleteam@gmail.com>
* bt: add authentication for all characteristics
* bt: app_ble cleanup
* bt: add start and stop advertising API
* bt: rework application with start and stop advertising API
* bt: support f7 target
* bt: f7 target remove unused files
* bt: stop advertising in bt debug application
* bt: fix bt status bar update
* bt: change bluetooth On Off order
* WidGet: fix name Multiline String Element
* SubGhz: rename SubGhzProtocol to SubGhzParser and bring it up
* SubGhz: a new way to navigate in receiver views
* SubGhz: fix syntax
* WedGet: add forwarding input type to wedget button callback, fix using a callback in an application
* SubGhz: add assertions and status checks
* SubGhz: fix syntax
* [FL-1790] SubGhz: fix GateTX
* SubGhz: add 434.42 MHz frequency support
* SubGhz: rename type protocol, add decoder stage names
* SubGhz: fix navigation through received signals when changing scenes
* SubGhz: fix 2-fsk config
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ble: remove heart rate profile
* ble-glue: delete dead code
* ble-glue: dis refactoring
* ble-glue: add battery service
* broken ble_common refactoring
* ble-glue: advertise 128 bit service uid
* ble-glue: remove dead code
* ble: advertise service 16 bit uid depending on flipper color
* ble-glue: remove debug
* ble: intriduce serial service
* ble: serial over ble
* bt: serial echo server
* bt: serial service process indicate acknowledge
* bt: serial service event handler update
* bt: refactore battery service
* bt: add battery level apdate API
* power: update battery level on change
* bt: refactore device information service
* app_ble: pairing configuration
* bt: display pin code
* bt: refactor battery service
* bt: refactor device info service
* bt: change advertise timer to freertos one
* bt: separate app_ble to hci and gap
* bt: increase max ble packet size
* gap: refactoring
* bt: refactor serial service
* bt: support f7 target
* bt: not blocking pin code show request
Co-authored-by: Anna Prosvetova <anna@prosvetova.me>
Co-authored-by: あく <alleteam@gmail.com>
* RFID: pull antenna down when emulating
* Rfid: fixed HID emulation by adding zero pulse every 4 bits
* Rfid: HID emulation fixed with DSP based FSK oscillator.
* Rfid: receive 125KHz clock for emulation timer from antenna and comparator
* Rfid: commented unused variable
* Firmware: rollback changes in f6.
* Add F7 target based on F6.
* F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values.
* FuriHal: RFID init routine.
* Scripts: update OTP tool for v11 board
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ble: remove heart rate profile
* ble-glue: delete dead code
* ble-glue: dis refactoring
* ble-glue: add battery service
* broken ble_common refactoring
* ble-glue: advertise 128 bit service uid
* ble-glue: remove dead code
* ble: advertise service 16 bit uid depending on flipper color
* ble-glue: remove debug
* ble: intriduce serial service
* ble: serial over ble
* bt: serial echo server
* bt: serial service process indicate acknowledge
* bt: serial service event handler update
* bt: refactore battery service
* bt: add battery level apdate API
* power: update battery level on change
* bt: refactore device information service
Co-authored-by: あく <alleteam@gmail.com>
* Cli: add missing const in cli_write.
* Gui, Input: bit fields based key complementarity on all levels, key and type names API.
* Gui: minor cleanup of bit filed usage
* SubGhz: Fix Timer hopping
* SubGhz: add display of received packages and their maximum number. redesigned interface, the maximum number of received packages increased to 50
* SubGhz: add clearing history on exit read scene, jump after saving the key into the history of received signals
* SubGhz: Fix honoring the width of the icon for transmitter scene
* RFID: Fix [FL-1755] freeze after key emulation
* SubGhz: drop analyze scene and views
* SubGhz: fix save scene
* Input, GUI: new event delivery scheme that groups event for complementarity.
* Gui: update View Dispatcher documentation
* Gui: remove dead code, wait till all input events are delivered in ViewDispatcher in queue mode.
* Gui: update comment in ViewDispatcher
* FuriHal: fix incorrect clock disable invocation
* FuriHal: proper include
* SubGhz: properly reset history in receiver view
* Gui: correct view switch order and non-complementary events discarding
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Add millis() furi, add subghz history struct
* SubGhz: Fix subghz history
* Gubghz: Fix code repeat history, add clean history
* SubGhz: reading and adding keys to history
* Gui: Renaming Sub 1-Ghz -> SubGhz
* Archive: Renaming Sub 1-Ghz -> SubGhz
* SubGhz: Add menu history, modified button for sending a signal, changed output of data about accepted protocol
* Archive: Fix name subghz
* SubGhz: Menu navigation
* Assets: Add assets/SubGHz/icon.png
* Assets: add new icons for subghz
* SubGhz: Fix name Add manually scene
* SubGhz: Fix load icon Read scene. rename encoder struct, rename protocol function load from file, add load raw data protocol, add info pleasant signals all protocol
* SubGhz: fix memory leak
* SubGhz: change of receiving frequency for read scene
* SubGhz: Add save/load frequency and preset, add automatic configuration of transmit/receive to the desired frequency and modulation, add button "save" config scene
* SubGhz: Fix frequency and preset, fix frequency add manualli scene, fix re-executing the parser
* Furi-hal-subghz: add 2-FSK config, fix ook config 650KHz BW Tx filter
* Fix formatting and release build
* SubGhz: Delete read scene
* SubGhz: Fix frequency add manualli scene, refactoring code
* SubGhz: 2 profiles for OOK, fix broken build.
* SubGhz: Add passing static codes from read scene, add notification read scene, refactoring code
* SubGhz: fix assert on worker double stop.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* USB-CDC: accepting the next data packet only if we process previous data
* USB-CDC: use USB FS packet size
* HAL-console: puts method
* Check: print assertion data
* FuriHal: rx stream free space aware CDC confirmation.
* Bootloader: pull down USB lines, leave the rest to the firmware or bootloader
* F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom.
* F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
- Restrict with 31 bytes length for remote and signal name
- Don't stuck for 0 PWM cycle timings
- Support timings > 65535 PWM cycles
- Fix remote file open error
- Add IRDA TX debug redirect
- Add remote parse error print, improve parsing, support tabs
- Fix stucks with uncorrect RAW signal values, long strings in remote file, etc
- Fix HAL signals capturing (save previous read value)
- Fix leak in case of failed parsing
* Storage-cli: the file write function is splitted into a function for working with text and function for raw data
* Storage-cli: read_chunks, renamed write_raw to write_chunk
* Storage-cli: fix typo
* SD Hal: fixed wrong read/write block address
* HAL-console: printf
* Storage benchmark: more popular sizes
* Toolbox: md5
* Storage-cli: better read_chunks function, md5 hash function
* Notification: fixed incorrect error message when loading settings
* Storage-cli: stat command
* Storage-cli: stat, "/" is also storage
* Scripts: add storage managment script
* Scripts, storage lib: send command with known response syntax instead of SOH
* Scripts: python3 from env
* Storage-cli: fixed mess with error texts
* Storage-cli: write, show welcome message only if we didn't have any errors
* Storage: poorly fixed folders copying
* Storage: close an old file if an error occurred while opening a new file
* Storage-cli: fixed storage info spacing
* Scripts: use positional arguments in storage.
* Scripts: explicit string encoding and decoding, documentation in comments.
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: update STM32CubeWB to latest version.
* Makefile: debug other script
* FuriHal: correctly handle 0 size transfers in VCP
* Dolphin: cleanup and minor timer tuning.
* FuriHal: update FreeRTOS config with bigger timer command queue.
* FuriHal: delayed irq enabling, fixes missing ticks.
* FuriHal: use SFSA to determine free space for internal FS, update linker script to use as much space as theoretically possible.
* Scripts: update core2 flashing scripts and OB data.
* Github: bundle resources, core2 firmware and supplementary data.
* GitHub: versioning for supplemental artifacts
* SubGhz: the functions of saving loading KeeLog have been modified, saving KeeLog is prohibited
* SubGhz: Fix displaying Nice FlorS in the Raed scene
* SubGhz: Fix displaying Faac SLH in the Raed scene
* SubGhz: Fix displaying iDo in the Raed scene
* SubGhz: Fix displaying Star Line in the Raed scene
* SubGhz: Fix displaying Nice Flo in the Raed scene, added save and load functions. (testing needed, no remote control)
* SubGhz: subghz_beginadded common encoder upload signal
* SubGhz: add Came encoder
* SubGhz: modified pricenton encoder, fix view transmitter hide the "Send" button if there is no encoder
* SubGhz: add nice flo encoder, need testing no remote control
* SubGhz: add gate_tx encoder
* SubGhz: add nero_sketch encoder
* SubGhz: add keelog encoder
* SubGhz: add long upload upload while the button is pressed while releasing the transfer is over, with a check for sticking (maximum 200 upload repetitions)
* SubGhz: fix max upload
* SubGhz: Fix structure subghz add encoder
* SubGhz: add generating and sending a dynamic keelog key, refactoring the code
* SubGhz: add notifications
* SubGhz: add creating a new remote control (Pricenton, Nice Flo 12bit, Nice Flo 24bit, CAME 12bit, CAME 24bit, Gate TX, DoorHan)
* SubGhz: Fix load file, fix scene start
* Subghz: Fix show key
* SubGhz: Fix subghz_cli
* SubGhz: Fix furi-hal-subghz
* Format sources
* SubGhz: standard notification scheme, fix broken assert in DMA.
* SubGhz: move level alignment logic to furi-hal-subghz, fix spelling, cleanup.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: port spi to ll. Bootloader: add spi and display.
* Makefile: rollback disabled freertos introspection
* FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio.
* SdCard: port missing bits to furi-hal-gpio
* FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code.
* GUI: clear canvas on start. FuriHal: no pullup on radio spi bus.
* FuriHal: use check instead of assert in spi lock routines
* FuriHal: remove timeouts
* SdHal: add guard time to SDCARD CS PIN control.
* FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation.
* Bootloader: update DFU text and add image.
* FuriHal: drop unused ST HAL modules.
* SdHal: fixed swapped hal_gpio_init_ex arguments
* SpiHal: fixed swapped hal_gpio_init_ex arguments
* IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex
* RfidHal: fixed swapped hal_gpio_init_ex arguments
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Rfid: indala 40134 validation and decoding
* Rfid: show indala info
* Rfid: decoder to output comparator signal on gpio pins
* Rfid: working indala 40134 decoder
* HAL: added function to change rfid timer parameters on the fly
* RFID: Indala reading, card detection, card verification
* Rfid: indala writing
* Lib: add random name library
* Text_input: add default text clearing
* All: rework all applications with new text_input API
* Nfc: fix removing dev file on save_name scene enter
* Lib: move all free radicals to toolbox and update API usage.
Co-authored-by: あく <alleteam@gmail.com>
* FS-Api: removed datetime manipulation functions and most of the file flags
* Filesystem: common proxy api
* Filesystem: renamed to Storage. Work has begun on a glue layer. Added functions for reentrance.
* Storage: sd mount and sd file open
* Storage: sd file close
* Storage: temporary test app
* Storage: free filedata on close
* Storage: sd file read and write
* Storage: added internal storage (LittleFS)
* Storage: renamed internal commands
* Storage: seek, tell, truncate, size, sync, eof
* Storage: error descriptions
* Storage: directory management api (open, close, read, rewind)
* Storage: common management api (stat, fs_stat, remove, rename, mkdir)
* Dolphin app and Notifications app now use raw storage.
* Storage: storage statuses renamed. Implemented sd card icon.
* Storage: added raw sd-card api.
* Storage settings: work started
* Assets: use new icons approach
* Storage settings: working storage settings
* Storage: completely redesigned api, no longer sticking out FS_Api
* Storage: more simplified api, getting error_id from file is hidden from user, pointer to api is hidden inside file
* Storage: cli info and format commands
* Storage-cli: file list
* Storage: a simpler and more reliable api
* FatFS: slightly lighter and faster config. Also disabled reentrancy and file locking functions. They moved to a storage service.
* Storage-cli: accommodate to the new cli api.
* Storage: filesystem api is separated into internal and common api.
* Cli: added the ability to print the list of free heap blocks
* Storage: uses a list instead of an array to store the StorageFile. Rewrote api calls to use semaphores instead of thread flags.
* Storage settings: added the ability to benchmark the SD card.
* Gui module file select: uses new storage api
* Apps: removed deprecated sd_card_test application
* Args lib: support for enquoted arguments
* Dialogs: a new gui app for simple non-asynchronous apps
* Dialogs: view holder for easy single view work
* File worker: use new storage api
* IButton and lfrrfid apps: save keys to any storage
* Apps: fix ibutton and lfrfid stack, remove sd_card_test.
* SD filesystem: app removed
* File worker: fixed api pointer type
* Subghz: loading assets using the new storage api
* NFC: use the new storage api
* Dialogs: the better api for the message element
* Archive: use new storage api
* Irda: changed assest path, changed app path
* FileWorker: removed unused file_buf_cnt
* Storage: copying and renaming files now works between storages
* Storage cli: read, copy, remove, rename commands
* Archive: removed commented code
* Storage cli: write command
* Applications: add SRV_STORAGE and SRV_DIALOGS
* Internal-storage: removed
* Storage: improved api
* Storage app: changed api pointer from StorageApp to Storage
* Storage: better file_id handling
* Storage: more consistent errors
* Loader: support for NULL icons
* Storage: do nothing with the lfs file or directory if it is not open
* Storage: fix typo
* Storage: minor float usage cleanup, rename some symbols.
* Storage: compact doxygen comments.
Co-authored-by: あく <alleteam@gmail.com>
* ApiHal: console abstraction, change uart baud rate to 230400. Bootloader: drop F5. Furi: prevent thread local output to serial console in stdglue.
* ApiHal: take control over system initialization, reorder some subsystems in a hope of fixing USB issues.
* Main: cleanup dead code. ISR: take care of HSECSS by our self. USB: leave clock configuration alone.
* F6 cube: switch RCC to LL.
* Cli: rollback return behavior.
* Firmware: drop F5 target
* Rename app-loader to loader
* Update code owners file
* Loader: global application start lock API, minor refactoring
* Archive: update loader usage
* Cli: Command flags, global application start lock
* Apps: update cli API usage
* Bootloader: minor refactoring
* Firmware: minor build refactoring
* SubGhz: GUI packet test
* SubGhz: drop packet transmission and unused presets
* Github: drop F5 from build
* Archive: favorites
* Archive: a little bit more of Favorites
* Add RAW format
* F5 stubs for build to pass
* Fix saving decoded signal error
* Irda: set ISR before starting timer, remove explicit NVIC configuration
Co-authored-by: あく <alleteam@gmail.com>
* gui: refactore ViewNavigator -> SceneManager
* view_dispatcher: remove scene controller, add custom and navigation cb
* scene_manager: rework scene controller, move AppScene from lib
* nfc: rework nfc scenes with new scene controller API
* view_dispatcher: crash on free if not all views were freed
* nfc: introduce scene declaration
* scene_manager: allocate and configure application scenes
* nfc: rework nfc with new Scene Manager API
* scene_manager: remove dublicated scene handlers allocation
* nfc: rework nfc app with new scene manager API
* view_dispatcher: add tick event
* scene_manager: add tick event type and handler
* nfc: rework notifications with tick event
* scene_manager: remove scene id from scene structure
* scene_manager: rename array -> stack, add documentation
* api-hal-nfc: remove listen activation processing
* nfc_scene_start: shorter submenu call
* nfc: fix nfc file name
* nfc: fix Retry in mifare ul success read
* nfc_cli: fix read timeout in nfc_detect CLI command
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: changing the operation of the capture timer, and the logic of the work of parsers
* Add toolbox lib. Move levels to toolbox. Subghz switch to levels.
* Subghz: update worker signatures
* SubGhz: pluggable level duration implementations.
* SubGhz : test drawing pictures in Gui
* SubGhz: Added a callback with the parser structure as argument
* SubGhz: copy protocol data to model
* SubGhz: refactoing code
* SubGhz: cleanup and format sources
* SubGhz: remove comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Cli: merge version and hwinfo and form machine/human readable key value set.
* Backport F6 changes to F5. Add readme to cli_command_device_info rountine
* Cli: return proper order to radio stack version in device_info command
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* ApiHal: set frequency and path in one go. Drivers: proper frequency registers calculation for CC1101. Update subghz cli to match new api.
* SubGhz: preparation for parsers porting, tim2 sharing
* ApiHal: add interrupts API, move all TIM2 related things there.
* SubGhz: refactor protocol lib and add keeloq.
* SubGhz: proper init_set for keeloq manafacture key
* SubGhz: port more protocols to lib
* SubGhz: load keeloq manufacture keys from sd card (if any).
* SubGhz: format output from protocols.
* SubGhz: use default frequency in subghz_rx cli command.
* SubGhz: keeloq key types
* Fix compillation error when internal storage disabled
* SubGhz: minor cleanup
* SubGhz: properly handle timeout and reset signal in subghz_rx
* SubGhz: Worker, Capture View. Furi: emulate thread join.
* SubGhz: free strings on keeloq key load end
* SubGhz: update protocols reporting API, app refactoring and capture view, update API HAL usage.
* SubGhz: update dump formatting
* ApiHal: backport subghz preset to F5
* ApiHal: backport subghz frequency range to F5
* Assets: move assets compilation to separate Makefile. Move all scripts to scripts folder. Add scripts ReadMe. Add precompiled assets.
* Split assets.py into separate entities. Option bytes for FL-1289 and checker/setter.
* Cli: explicitly initialize variable befor use in api_hal_vcp_rx_with_timeout
* Rename ob_check script to ob.
* Add saving to SD-Card (not ready yet)
* Add saving to SD-card (done)
* Select previous menu item
* Fix central button
* Fix current_button
* Refactoring
* Add notifications
* [FL-1417] Add IRDA CLI
CLI commands:
1) ir_rx
Receives all IR-trafic, decodes and prints result to stdout
2) ir_tx <protocol> <address> <command>
Transmits IR-signal. Address and command are hex-formatted
* Fix BUG with random memory corruption at random time in random place in random universe in random unknown space and time forever amen
* Fix submenu set_selected_item
* Bring protocol order back
* Add TODO sdcard check
* USB CDC descriptor: join product name from two strings
* add f5 support
* USB CDC descriptor: use constant device name across all device
* BLE: use device name in advertising and model
* BLE: truncate device name
Co-authored-by: あく <alleteam@gmail.com>
* api-hal-spi: make fast and slow sd card devices
* api-hal-spi: add configuration for spi bus
* fatfs: rework sd card driver with api-hal-spi
* api-hal-spi: enable spi in bus reset
* HAL interrupl manager: cleaned version
* HAL interrupt manager: mem barriers
* HAL interrupt manager: volatile interrupt list
Co-authored-by: あく <alleteam@gmail.com>
* Add more more frequencees and change ok key bahavior to toggle
* GUI: add queue support to ViewDispatcher
* SubGhz: basic cli
* SubGHz: pt send cli
* SubGhz: carrier cli commands.
* Fix irda test data merge artifacts
* Add cscope db generation
* Add api-hal-irda, TIM2: HAL->LL
* Add libirda: pwm decoding
* Universal state machine
* Add irda decoder library
* Move IRDA capture to standalone tool
* Add encoder/decoder samsung32, NEC, fix bugs
* Port current App to new Irda lib
* Fix clang format for test data
* Port IRDA api-hal to f6
Co-authored-by: あく <alleteam@gmail.com>
* Add littlefs submodule
* Furi: add mutex in logging, fix issues with corrupted printf
* ApiHal: disable debug traces in ble glue
* App-loader: more logs
* Passport: fix invalid DolphinState usage
* ApiHal, linker script: flash API is now aware of free space, complete abstraction layer for storage
* Internal Storage: littlefs based storage services with key value API. Migrate dolphin state to new storage API.
* furi_log: introduce log system
* applications: rework with furi logging
* furi_log: reset color after tag printed
* core: add log info
Co-authored-by: あく <alleteam@gmail.com>
* Add bootloader versioning
* Move some logic to api-hal-version
* Backport to f4
* Dolphin: update version screen layout, make it more readable
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Interrupt manager: add memory barriers.
* ISRs: remove TIM17 dead code.
* API HAL Delay: rename initialization routine and move to API-HAL
* Main: move FURI initialization to the start.
* API HAL GPIO: drop CC1101 shenanigans, COMP inversion for new boards.
* IButton: migrate Cyfral and Metakom to RFID comp routine, make it compatible with new boards.
* RFID: Better keyboard handling and shutdown routines
* API HAL SPI: refactoring, split into layers, prepare ST HAL separation. API HAL SubGhz: initialize on start. Drivers: add basic cc1101 driver. Update API usage. Debug: increase max debugger port speed. Remove subghz apps.
* CC1101: chip status handling. ApiHalSpi: increase SubGhz bus speed to 8mhz. F4: backport subghz initialization.
* Api Hal SubGhz: rx path and frequency. CC1101: frequency control.
* SubGhz Application: basic tests
* SubGhz app: tone and packet test. API HAL SUBGHZ: update configs, add missing bits and pieces.
* GPIO: disable CC1101 GD0 pin configuration. API HAL OS: enable sleep. Cleanup interrupts and gpio code.
* API HAL: disable deep sleep, add light sleep, use it instead.
* rename old ibutton app to ibutton-test
* more renames
* updated onewire library compilation condition
* add submenu_clean subroutine
* add index for submenu callback
* c++ guard for gui modules
* add released ibutton app
* fix the position of the submenu window if there are too few items
* iButton app basis
* negative icon position info
* fix submenu_clean subroutine
* add ibutton app to applications makefile
* add onewire key read routine to read mode
* rename mode to scene
* rename files and folder (mode to scene)
* rename ibutton view to view manager
* rename get_view to get_view_manager
* cpp guards
* key read, store and notify features
* syntax fix
* make iButtonScene functions pure virtual
* fix syntax
* add text store, add new scene (crc error)
* not a key scene
* syntax fix
* read success scene
* app, switching to the previous scene with the number of scenes to be skipped
* scene whith menu when key is readed
* fix font height calculation, fix offsets
* add key write scene
* view_dispatcher_remove_view subroutine
* generic pause/resume os methods
* fix furi_assert usage
* key store, worker
* fix pointer comparsion
* saved keys, saved key action scenes
* key delete/confirm delete scenes and routines
* use last input subsystem changes
* fix syntax
* fix new model usage in submenu
* fix includes
* use vibro pin
* use stored key name if valid
* emulate scene
* random name generator
* name and save readed key scenes, new icon
* fix icon position
* fix text scene exit
* fix naming, fix text placement, new info scene
* state-driven cyfral decoder
* better cyfral decoder
* better cyfral decoder
* one wire: search command set
* metakom decoder
* more key types
* add next scene to error scenes
* universal key reader
* use new key reader
* syntax fix
* warning fix
* byte input module template
* new thread and insomnia api usage
* New element: slightly rounded frame
* Use elements_slightly_rounded_frame in text input
* Gui test app: byte input usage
* Byte input module: data drawing and selection
* Byte input: comment currently unused fns
* remove volatile qualifier
* base byte input realisation
* App gui test: remove internal fns visibility
* Byne input, final version
* test install gcc-arm-none-eabi-10-2020-q4-major
* test install gcc-arm-none-eabi-10-2020-q4-major
* App iButton: byte input view managment
* App iButton: add key manually scenes
* App iButton: rename scenes, add popup timeout
* App iButton: use new scenes, new fn for rollback to specific prevous scene.
* App iButton: remove byte input view on app exit
* App iButton: edit key scene
* Module byte input: reduce swintch value to uint8_t
* Module byte input: switch from switch-case to if, unfortunately we need compile-time constants to use with switch
* Icons: new small arrows
* Module byte input: new arrangement of elements
* OneWire slave lib: fix deattach sequence
* App iButton: pulse sequencer
* App iButton: add more keys to store
* App iButton: split key worker to separate read/write/emulate entitys
* App iButton: use new read/emulate entities
* fix callback pointer saving
* App iButton: use KeyReader error enum instead of KeyWorker error list handling
* App iButton: do not use insomnia fns in pulse sequencer
* App iButton: use KeyReader error enum in read scene
* OneWire slave lib: more READ ROM command variants, call callback only if positive result
* GPIO resources: add external gpio
* App SD/NFC: removed application
* App iButton-test: update to new light api
* App iButton: update to new light-api
* Outdated apps: add api-light-usage
* Gpio: update SD card CS pin settings
* API-power: added fns to disable/enable external 3v3 dc-dc
* API-gpio: separated SD card detect routines
* Resources: removed sd cs pin
* SD card: low level init now resets card power supply
* App SD-filesystem: use new card detect fns
* SD card: fix low level init headers
* SD card: more realilable low level init, power reset, exit from command read cycle conditionally
* App SD-filesystem: led notifiers, init cycling
* SD card: backport to F4
* Api PWM: add c++ guards
* App iButton: yellow blink in emulate scene, vibro on
* App iButton: one wire keys command set
* App iButton: successful write scene
* App iButton: key writer
* App iButton: syntax fix
* App iButton: notify write success
* App iButton: fix double scene change
* SD card: handle eject in init sequence
* SD card: api to set level on detect gpio
* SPI: api to set state on bus pins
* SD card: set low state on bus pins while power reset
* File select: init
* File select: fix input consuming
* SD Card: fixed dir open api error
* SD-card: replace strncpy by strlcpy. Fix buffer overflow error.
* API HAL OS: replace CMP based ticks with ARR based one, hard reset lptimer on reconfiguration.
* GUI: More stack size for (temporary, wee need to implement sd card api in separate thread)
* GUI: File select module.
* App iButton-test: remove obsolete app
Co-authored-by: rusdacent <rusdacentx0x08@gmail.com>
Co-authored-by: coreglitch <mail@s3f.ru>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* update usb descriptor to display unique flipper name
* added flip_ prefix for usb descriptor, updated manufacturer string
* include name in ApiHalVersionOTP struct, update assets.py
Co-authored-by: あく <alleteam@gmail.com>
* api-hal-bt: separate bt init to core init and app start
* bt: add continuous TX and RX tests
* bt: finish rx test on Back button click
* api-hal-bt: check core 2 started, same f4 and f5 implementation
* bt: refactoring, move hopping test logic to main thread
Co-authored-by: あく <alleteam@gmail.com>
* Outdated apps: add api-light-usage
* Gpio: update SD card CS pin settings
* API-power: added fns to disable/enable external 3v3 dc-dc
* API-gpio: separated SD card detect routines
* Resources: removed sd cs pin
* SD card: low level init now resets card power supply
* App SD-filesystem: use new card detect fns
* SD card: fix low level init headers
* SD card: more realilable low level init, power reset, exit from command read cycle conditionally
* App SD-filesystem: led notifiers, init cycling
* SD card: backport to F4
* SD card: handle eject in init sequence
* SD card: api to set level on detect gpio
* SPI: api to set state on bus pins
* SD card: set low state on bus pins while power reset
Co-authored-by: coreglitch <mail@s3f.ru>
* add battery health reading from gauge
* add battery health reading to api-hal-power
* update battery health in power application
Co-authored-by: あく <alleteam@gmail.com>
* invert inputs
* move RFID RX to IRQ, unstable
* remove critical blink
* supress short carrier, decrease queue
* migrate to stream buffer
* enable state change
* conditions build for invert RFID IN
* move get_rfid_in_level
* use hal function for get comp level, remove duplicate interrupt registration, interrupt unregister on exit
* reinit comparator context on mode change
* BT: render icon statically.
* Move API HAL Power init call to api_hal_init.
* API HAL Power: replace stop2 mode with stop1 to ensure usb and lptim2 proper work.
* Add F5 target, lp5562 driver and api-hal-light. Update api-usage, switch to F5 by default.
* API HAL: add i2c and hardware version api. Dolphin: show hardware version.
* OTP version generator and flashing utility.
* Assets script: fix code formatting
* Backport F5 changes to F4
* F4: disable insomnia, prevent damage to BLE RX path
* F5 HAL API Light: remove magic delay to fix magic BLE
* Dolphin: HW target validation on start
* invert RSSI indication in sub-1
* API HAL: rename board to body in version api
* Gpio tester: detach and release viewport on exit
Co-authored-by: aanper <mail@s3f.ru>
* Furi: replace obsolete furiac_exit with osThreadExit, drop obsolete apis and test. Rename systemd to flipper and move to separate file, cleanup. ApiHal: Rename timebase to os and move freertos hooks there, move insomnia api to power module.
* Furi: new thread helper
* Furi: cleanup thread documentation
* Flipper, AppLoader: update to use FuriThread. Update tasks signatures to match FuriThreadCallback signature.
* F4: rename API_HAL_TIMEBASE_DEBUG to API_HAL_OS_DEBUG
* Applications: rename FuriApplication to FlipperApplication, use FuriThreadCallback signature for apps.
* C++ app template sample, new exit method
* BLE: prevent stack overflow in hrs thread
* BLE: add firmware and software attribute to dis service
* BLE: return tx to 0dBm
* BLE: update tx power configuration comment to match real value
* fix Werror flag
* strdup implementation fix
* fix irda and lfrdid printf
* remove unused position
* doubtful type fix
* type fix in EXTI interrupt
* fix warnings in CubeWB, need to fork ST repo
* onewire fixes
* fork STM32WB Cube repo
* SYSTEM: tickless mode with deep sleep.
* Move FreeRTOS ticks to lptim2
* API: move all sumbodules init routines to one place. Timebase: working lptim2 at tick source.
* API Timebase: lp-timer routines, timer access safe zones prediction and synchronization. FreeRTOS: adjust configuration for tickless mode.
* NFC: support for tickless mode.
* API Timebase: improve tick error handling in IRQ. Apploader: use insomnia mode to run applications.
* BLE: prevent sleep while core2 starting
* HAL: nap while in insomnia mode
* init records work
* try to implement record delete
* tests and flapp
* flapp subsystem
* new core functions to get app stat, simplify core code
* fix thread termination
* add strdup to core
* fix tests
* Refactoring: remove all unusued parts, update API usage, aggreagate API sources and headers, new record storage
* Refactoring: update furi record api usage, cleanup code
* Fix broken merge for freertos apps
* Core, Target: fix compilation warnings
* Drop firmware target local
* HAL Timebase, Power, Clock: semaphore guarded access to clock and power modes, better sleep mode.
* SD-Filesystem: wait for all deps to arrive before adding widget. Core, BLE: disable debug dump to serial.
* delete old app example-ipc
* delete old app fatfs list
* fix strobe app, add input header
* delete old display driver
* comment old app qr-code
* fix sd-card test, add forced widget update
* remove unused new core test
* increase heap to 128k
* comment and assert old core tests
* fix syntax
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SYSTEM: tickless mode with deep sleep.
* Move FreeRTOS ticks to lptim2.
* API: move all sumbodules init routines to one place.
* Timebase: working lptim2 at tick source.
* API Timebase: lp-timer routines, timer access safe zones prediction and synchronization.
* FreeRTOS: adjust configuration for tickless mode.
* NFC: support for tickless mode.
* API Timebase: improve tick error handling in IRQ.
* Apploader: use insomnia mode to run applications.
* BLE: prevent sleep while core2 starting.
* HAL: nap while in insomnia mode.
Co-authored-by: coreglitch <mail@s3f.ru>
* fix "state not acquired error"
* add InterruptTypeComparatorTrigger to interrupt mgr, use interrupt mgr in irda app
* separate init irda timer
* capture events buffer by app
* irda common decoder
* irda nec decoder realization
* finished work with decoder
* fix app path
* fix widget remove on exit
* nec receive, store and send
* init some packets
* BLE: working version
* BLE: cleanup
* BLE: update device description and DIS.
* BLE: explicitly take semaphore and configure CLK48, bt subsystem status, remove LPM.
* HAL: add missing api_hal_bt_is_alive symbol
* TODO about valuemutex
* duplicate f3-1 (f4) ioc from f3
* regenerate project
* use target dir for ble glue path
* update f4 from f3
Co-authored-by: coreglitch <mail@s3f.ru>
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2
Co-authored-by: aanper <mail@s3f.ru>
* fix multithread logic
* more buffer for dallas id string
* update apps to use new logic
* delay_us small speedup
* add consant qualifier to gpio records and some core api
* fix some apps to use simpler method of getting gpio record
* fix ibutton app, stupid stack problem
* pulldown ibutton pin during rfid read
* enable and handle COMP interrupts
* send events from comparator IRQ and handle in app
* manchester encode
* successfully read em4100
* read-emulate
* led
* variable cluster size, label info functions for targets
* app record
* init, mount, get label, get sn, get space
* enable exfat
* more stack for the stack god
* remove c app and add cpp app
* remove MULTI_PARTITION
* fix 4gb bug
* update app to new template lib, add animated waiting
* tiny buffer configuration
* write speed benchmark
* fnv1a hash library
* make DEFAULT_STACK_SIZE and MAX_TASK_COUNT defined per target
* fully functional sd card app
* build sd test app to release firmware
* cpp, not c
* light up red led if error
* flags for c++
* linking with g++
* suppres snprintf warning
* move format work area to heap
Co-authored-by: coreglitch <mail@s3f.ru>
