* Core: wipe memory after free. RFID,iButton: fix iterator use after invalidation.
* Debug: support unix wildcards for register matching in svd, update MCU description file and minify it.
* Toolbox: getter for File in FlipperFile.
* Makefile: conditional flashing
* SubGhz: keeloq_mfcodes encryption tool.
* FuriHal: proper IV handling on CBC in crypto. SubGhz: add support for encrypted keeloq keys. Makefile: move formatting to top Makefile.
* SubGhz: rename some function names to match naming scheme.
* SubGhz: encryption tool, fix windows line endings
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
- RPC: added CLI command to start session - all input bytes goes into RPC, all RPC output goes into VCP
- RPC: added command to close session (actually it only notifies transport layer)
- RPC: added recursive rmdir
- RPC: hard-coded listing for root directory (any, ext, int)
- Fixed CLI leak
- Fixed furi_record_delete leak
- Unit tests: repaired
- Unit tests: corrected output - remove excess, change dots with progress spinner
- Unit tests: added leak check
- Unit tests: SD mount check before start
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* File_Worker: getting the name of a new file with an index
* SubGhz: add decoder RAW protocol
* SubGhz: add view Save RAW
* SubGhz: refactoring subghz custom event
* SubGhz: fix syntax
* SubGhz: fix error build
* SubGhz: test build
* SubGhz: refactoring subghz, add rename, delete, start and emulate RAW signal
* SubGhz: fix triangle glitch in save raw view
* SubGhz: fix receiver config scene
* SubGhz: fix transfer after returning from save scene
* Canvas: add font rotation
* SubGhz: raw protocol encoder
* SubGhz: fix error completion of transfer raw encoder
* SubGhz: increased the speed of reading RAW data from a flash drive, displaying the name of the saved file in the Save RAW scene
* Canvas: fix font rotation
* SubGhz: fix navigation save RAW scene
* SubGhz: add decode came atomo
* Git: renormalize
* Cleanup sources and enums
* Gui: add font direction to canvas reset, canvas init sequence cleanup.
* SubGhz: reorder menu.
* Gui: correct canvas_set_font_direction signature
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ble-glue: add on connect \ disconnect, on send \ received callbacks
* bt: rework service with furi-hal-bt and callbacks
* bt: update battery level on connect
* ble-glue: set one callback with parameters
* bt: rework callbacks, remove unused API
* ble-glue: remove dead code
* furi-hal-bt: add documentation
* ble-glue: apply changes for f7 target
* bt: rename RpcInstance -> Rpc
* ble: add disconnection reason
* ble: don't open bt record from GAP
* bt: fix RPC session close
* Assets: separate targets for icons and protobuf
Co-authored-by: あく <alleteam@gmail.com>
* ToolBox: add manchester-decoder and manchester-encoder
* SubGhz: add new FM config cc1101
* Subghz: add protocol Kia
* SubGhz: fix receiving the last packet Nero Radio
* SubGhz: app protocol CAME Twin (TW2EE/TW4EE)
* SubGhz: add protocol CAME Atomo (AT03EV/ AT04EV)
* F7: sync with F6
* SubGhz: add frequency analyzer
* SubGhz: remove space from file name
* SubGhz: frequency analyzer add filter and fix view
* [FL-1939] GubGhz: Frequency analyzer redesign
* SubGhz: fix incorrect subghz api call sequence in frequency analyzer worker
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: add charge suppress API.
* FuriHal: add guards to insomnia and charge suppress routines.
* FuriHal: proper API for scheduler in power.
* FuriHal: move charging control from critical section, fix deadlock.
* Gui: use FreeRTOS native timers controls for IconAnimation, fix crash on animation start stop
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission, decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config, add hardware signal processing less than 16 μs, add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets
Co-authored-by: あく <alleteam@gmail.com>
* bt: add authentication for all characteristics
* bt: app_ble cleanup
* bt: add start and stop advertising API
* bt: rework application with start and stop advertising API
* bt: support f7 target
* bt: f7 target remove unused files
* bt: stop advertising in bt debug application
* bt: fix bt status bar update
* bt: change bluetooth On Off order
* WidGet: fix name Multiline String Element
* SubGhz: rename SubGhzProtocol to SubGhzParser and bring it up
* SubGhz: a new way to navigate in receiver views
* SubGhz: fix syntax
* WedGet: add forwarding input type to wedget button callback, fix using a callback in an application
* SubGhz: add assertions and status checks
* SubGhz: fix syntax
* [FL-1790] SubGhz: fix GateTX
* SubGhz: add 434.42 MHz frequency support
* SubGhz: rename type protocol, add decoder stage names
* SubGhz: fix navigation through received signals when changing scenes
* SubGhz: fix 2-fsk config
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ble: remove heart rate profile
* ble-glue: delete dead code
* ble-glue: dis refactoring
* ble-glue: add battery service
* broken ble_common refactoring
* ble-glue: advertise 128 bit service uid
* ble-glue: remove dead code
* ble: advertise service 16 bit uid depending on flipper color
* ble-glue: remove debug
* ble: intriduce serial service
* ble: serial over ble
* bt: serial echo server
* bt: serial service process indicate acknowledge
* bt: serial service event handler update
* bt: refactore battery service
* bt: add battery level apdate API
* power: update battery level on change
* bt: refactore device information service
* app_ble: pairing configuration
* bt: display pin code
* bt: refactor battery service
* bt: refactor device info service
* bt: change advertise timer to freertos one
* bt: separate app_ble to hci and gap
* bt: increase max ble packet size
* gap: refactoring
* bt: refactor serial service
* bt: support f7 target
* bt: not blocking pin code show request
Co-authored-by: Anna Prosvetova <anna@prosvetova.me>
Co-authored-by: あく <alleteam@gmail.com>
* RFID: pull antenna down when emulating
* Rfid: fixed HID emulation by adding zero pulse every 4 bits
* Rfid: HID emulation fixed with DSP based FSK oscillator.
* Rfid: receive 125KHz clock for emulation timer from antenna and comparator
* Rfid: commented unused variable
* Firmware: rollback changes in f6.
* Add F7 target based on F6.
* F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values.
* FuriHal: RFID init routine.
* Scripts: update OTP tool for v11 board
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
