diff --git a/documentation/devboard/Firmware update on Developer Board.md b/documentation/devboard/Firmware update on Developer Board.md
index aff24fd33..8fe68ba0d 100644
--- a/documentation/devboard/Firmware update on Developer Board.md	
+++ b/documentation/devboard/Firmware update on Developer Board.md	
@@ -9,7 +9,7 @@ If you’re not, please refer to the [Windows](https://www.digitalcitizen.life/c
 
 ## Step 1. Install the micro Flipper Build Tool
 
- is a cross-platform tool developed and supported by our team that enables basic development tasks for Flipper Zero, such as building and debugging applications, flashing firmware, creating VS Code development configurations, and flashing firmware to the Wi-Fi Developer Board.
+[micro Flipper Build Tool (uFBT)](https://pypi.org/project/ufbt/) is a cross-platform tool developed and supported by our team that enables basic development tasks for Flipper Zero, such as building and debugging applications, flashing firmware, creating VS Code development configurations, and flashing firmware to the Wi-Fi Developer Board.
 
 **On Linux & macOS:**
 
@@ -43,15 +43,15 @@ To update the firmware, you need to switch your Developer Board to Bootloader mo
     - **Windows:** Go to **Device Manager** and expand the **Ports (COM & LPT)** section.
 
 2. Connect the Developer Board to your computer using a USB-C cable.
-
     \image html https://cdn.flipperzero.one/Flipper_Zero_Wi-Fi_devboard_update_wired_connection.jpg width=700
 
 3. Switch your Developer Board to Bootloader mode:
 
-    1. Press and hold the **BOOT** button.
-    2. Press the **RESET** button while holding the **BOOT** button.
-    3. Release the **BOOT** button.
+    3.1. Press and hold the **BOOT** button.
 
+    3.2. Press the **RESET** button while holding the **BOOT** button.
+    
+    3.3. Release the **BOOT** button.
     \image html https://cdn.flipperzero.one/Flipper_Zero_Wi-Fi_devboard_reboot_to_bootloader.png width=700
 
 4. Repeat **Step 1** and view the name of your Developer Board that appeared in the list.
@@ -101,7 +101,6 @@ To fix it, try doing the following:
 ## Step 4. Finish the installation
 
 1. Reboot the Developer Board by pressing the **RESET** button.
-
     \image html https://cdn.flipperzero.one/Flipper_Zero_Wi-Fi_devboard_reboot_after_flashing.jpg width=700
 
 2. Disconnect and reconnect the USB-C cable.
diff --git a/documentation/devboard/Get started with the Dev Board.md b/documentation/devboard/Get started with the Dev Board.md
index 141bf6411..f9458cb83 100644
--- a/documentation/devboard/Get started with the Dev Board.md	
+++ b/documentation/devboard/Get started with the Dev Board.md	
@@ -1,4 +1,4 @@
-# Get started with the Dev Board {#dev_board_get_started}
+# Get started with the Devboard {#dev_board_get_started}
 
 \image html https://cdn.flipperzero.one/Flipper_Zero_WiFi_developer_board_box_CDN.jpg width=700
 
diff --git a/documentation/devboard/Reading logs via the Dev Board.md b/documentation/devboard/Reading logs via the Dev Board.md
index 26631b428..02c19ee63 100644
--- a/documentation/devboard/Reading logs via the Dev Board.md	
+++ b/documentation/devboard/Reading logs via the Dev Board.md	
@@ -1,4 +1,4 @@
-# Reading logs via the Dev Board {#dev_board_reading_logs}
+# Reading logs via the Devboard {#dev_board_reading_logs}
 
 The Developer Board allows you to read Flipper Zero logs via UART. Unlike reading logs via the command-line interface (CLI), the Developer Board enables you to collect logs from the device directly to a serial console independently from the operating system of Flipper Zero. It allows you to see the device's logs when it's loading, updating, or crashing. It's useful for debugging and troubleshooting during software development.
 
diff --git a/documentation/devboard/Wi-Fi connection to the Devboard.md b/documentation/devboard/Wi-Fi connection to the Devboard.md
index fd3bc3249..838964645 100644
--- a/documentation/devboard/Wi-Fi connection to the Devboard.md	
+++ b/documentation/devboard/Wi-Fi connection to the Devboard.md	
@@ -54,7 +54,6 @@ To connect the Developer Board in **Wi-Fi client** mode, you need to configure i
 4. Select the **STA** mode and enter your network's **SSID** (name) and **password**. For convenience, you can click the **+** button to see the list of nearby 2.4 GHz networks (5 GHz networks aren't supported).
 
 5. Save the configuration and reboot the Developer Board.
-
     \image html https://cdn.flipperzero.one/Flipper_Zero_WiFi_devboard_connect_to_WiFi_CDN.jpg width=700
 
 6. Now, you can access the Devboard's web interface at [http://blackmagic.local](https://blackmagic.local) via the existing Wi-Fi network without losing connection to the internet.