mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-11-10 06:54:19 +00:00
Remove obsolete target. Cleanup and update ReadMe. (#279)
This commit is contained in:
parent
14d1325b17
commit
4a9e4074f7
7 changed files with 39 additions and 62478 deletions
|
@ -30,9 +30,9 @@ You can run firmware locally (with HAL stub):
|
|||
* `docker-compose exec dev make -C firmware TARGET=local APP_TEST=1 run` for running tests
|
||||
* `docker-compose exec dev make -C firmware TARGET=local APP_*=1 run` for running examples (see `applications/applications.mk` for list of applications/examples)
|
||||
|
||||
Or you can use your dev. board:
|
||||
Or on your flipper:
|
||||
|
||||
`docker-compose exec dev make -C firmware TARGET=f2 APP_*=1 flash` for build and flash dev board (see `applications/applications.mk` for list of applications/examples)
|
||||
`docker-compose exec dev make -C firmware TARGET=f4 APP_*=1 flash` for build and flash dev board (see `applications/applications.mk` for list of applications/examples)
|
||||
|
||||
# Links
|
||||
* Task tracker: [Jira](https://flipperzero.atlassian.net/)
|
|
@ -3,20 +3,22 @@
|
|||
What it does?
|
||||
|
||||
- [+] Hardware initialization
|
||||
- [ ] Firmware CRC check
|
||||
- [+] Firmware update
|
||||
- [ ] Interactive UI
|
||||
- [+] Boot process LED indicators
|
||||
- [+] Firmware update
|
||||
- [ ] Firmware CRC check
|
||||
- [ ] Interactive UI
|
||||
- [ ] FS check
|
||||
- [ ] Recovery mode
|
||||
- [ ] Errata crutches
|
||||
|
||||
# Targets
|
||||
|
||||
| Name | Bootloader | Firmware | Reset | DFU |
|
||||
| | Address | Address | Combo | Combo |
|
||||
---------------------------------------------------------------------
|
||||
| f2 | 0x08000000 | 0x00008000 | L+R | L+R, hold R |
|
||||
| Name | Bootloader | Firmware | Reset | DFU |
|
||||
| | Address | Address | Combo | Combo |
|
||||
-----------------------------------------------------------------------------
|
||||
| f4 | 0x08000000 | 0x00008000 | L+Back | L+Back, hold L |
|
||||
|
||||
Also there is a ST bootloader combo available on empty device: L+Ok+Back, release Back,Left.
|
||||
Target independend code and headers in `src`and `target/include` folders.
|
||||
|
||||
# Building
|
||||
|
@ -27,21 +29,25 @@ Target independend code and headers in `src`and `target/include` folders.
|
|||
|
||||
## With toolchain installed in path:
|
||||
|
||||
`make`
|
||||
`make -C bootloader `
|
||||
|
||||
## Build Options
|
||||
|
||||
- `DEBUG` - 0/1 - enable or disable debug build. Default is 1.
|
||||
- `TARGET` - string - target to build. Default is `f2`.
|
||||
- `TARGET` - string - target to build. Default is `f4`.
|
||||
|
||||
# Flashing
|
||||
|
||||
Using stlink(st-flash):
|
||||
|
||||
`make flash`
|
||||
`make -C bootloader flash`
|
||||
|
||||
Or use ST bootloader:
|
||||
|
||||
`make -C bootloader upload`
|
||||
|
||||
# Debug
|
||||
|
||||
Using stlink (st-util + gdb):
|
||||
|
||||
`make debug`
|
||||
`make -C bootloader debug`
|
||||
|
|
|
@ -1,204 +0,0 @@
|
|||
/*
|
||||
******************************************************************************
|
||||
**
|
||||
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Author : Auto-generated by System Workbench for STM32
|
||||
**
|
||||
** Abstract : Linker script for STM32L476RGTx series
|
||||
** 1024Kbytes FLASH and 128Kbytes RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
** Distribution: The file is distributed “as is,” without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
|
||||
**
|
||||
** Redistribution and use in source and binary forms, with or without modification,
|
||||
** are permitted provided that the following conditions are met:
|
||||
** 1. Redistributions of source code must retain the above copyright notice,
|
||||
** this list of conditions and the following disclaimer.
|
||||
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
** this list of conditions and the following disclaimer in the documentation
|
||||
** and/or other materials provided with the distribution.
|
||||
** 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
** may be used to endorse or promote products derived from this software
|
||||
** without specific prior written permission.
|
||||
**
|
||||
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20018000; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
|
||||
RAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 32K
|
||||
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(8);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
.ARM : {
|
||||
. = ALIGN(8);
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
.init_array :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(8);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
|
@ -1,154 +0,0 @@
|
|||
#include <target.h>
|
||||
#include <stm32l4xx.h>
|
||||
#include <stm32l4xx_ll_system.h>
|
||||
#include <stm32l4xx_ll_bus.h>
|
||||
#include <stm32l4xx_ll_utils.h>
|
||||
#include <stm32l4xx_ll_rcc.h>
|
||||
#include <stm32l4xx_ll_rtc.h>
|
||||
#include <stm32l4xx_ll_pwr.h>
|
||||
#include <stm32l4xx_ll_gpio.h>
|
||||
|
||||
// Boot request enum
|
||||
#define BOOT_REQUEST_NONE 0x00000000
|
||||
#define BOOT_REQUEST_DFU 0xDF00B000
|
||||
// Boot to DFU pin
|
||||
#define BOOT_DFU_PORT GPIOB
|
||||
#define BOOT_DFU_PIN LL_GPIO_PIN_8
|
||||
// LCD backlight
|
||||
#define BOOT_LCD_BL_PORT GPIOB
|
||||
#define BOOT_LCD_BL_PIN LL_GPIO_PIN_6
|
||||
// LEDs
|
||||
#define LED_RED_PORT GPIOA
|
||||
#define LED_RED_PIN LL_GPIO_PIN_8
|
||||
#define LED_GREEN_PORT GPIOB
|
||||
#define LED_GREEN_PIN LL_GPIO_PIN_14
|
||||
#define LED_BLUE_PORT GPIOB
|
||||
#define LED_BLUE_PIN LL_GPIO_PIN_1
|
||||
// USB pins
|
||||
#define BOOT_USB_PORT GPIOA
|
||||
#define BOOT_USB_DM_PIN LL_GPIO_PIN_11
|
||||
#define BOOT_USB_DP_PIN LL_GPIO_PIN_12
|
||||
#define BOOT_USB_PIN (BOOT_USB_DM_PIN | BOOT_USB_DP_PIN)
|
||||
|
||||
void clock_init() {
|
||||
LL_FLASH_SetLatency(LL_FLASH_LATENCY_4);
|
||||
LL_RCC_MSI_Enable();
|
||||
while(LL_RCC_MSI_IsReady() != 1) {
|
||||
}
|
||||
|
||||
/* Main PLL configuration and activation */
|
||||
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2);
|
||||
LL_RCC_PLL_Enable();
|
||||
LL_RCC_PLL_EnableDomain_SYS();
|
||||
while(LL_RCC_PLL_IsReady() != 1) {
|
||||
}
|
||||
|
||||
/* Sysclk activation on the main PLL */
|
||||
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
|
||||
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
|
||||
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) {
|
||||
};
|
||||
|
||||
/* Set APB1 & APB2 prescaler*/
|
||||
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
|
||||
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
|
||||
|
||||
/* Set systick to 1ms in using frequency set to 80MHz */
|
||||
/* This frequency can be calculated through LL RCC macro */
|
||||
/* ex: __LL_RCC_CALC_PLLCLK_FREQ(__LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGESEL_RUN, LL_RCC_MSIRANGE_6),
|
||||
LL_RCC_PLLM_DIV_1, 40, LL_RCC_PLLR_DIV_2)*/
|
||||
LL_Init1msTick(80000000);
|
||||
|
||||
/* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
|
||||
LL_SetSystemCoreClock(80000000);
|
||||
}
|
||||
|
||||
void gpio_init() {
|
||||
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA);
|
||||
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOB);
|
||||
// USB D+
|
||||
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_MODE_OUTPUT);
|
||||
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
|
||||
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||
// USB D-
|
||||
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_MODE_OUTPUT);
|
||||
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
|
||||
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||
// Button: back
|
||||
LL_GPIO_SetPinMode(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_MODE_INPUT);
|
||||
LL_GPIO_SetPinPull(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_PULL_DOWN);
|
||||
// Display backlight
|
||||
LL_GPIO_SetPinMode(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_MODE_OUTPUT);
|
||||
LL_GPIO_SetPinSpeed(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_SPEED_FREQ_LOW);
|
||||
LL_GPIO_SetPinOutputType(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_OUTPUT_PUSHPULL);
|
||||
// LEDs
|
||||
LL_GPIO_SetPinMode(LED_RED_PORT, LED_RED_PIN, LL_GPIO_MODE_OUTPUT);
|
||||
LL_GPIO_SetPinOutputType(LED_RED_PORT, LED_RED_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||
LL_GPIO_SetOutputPin(LED_RED_PORT, LED_RED_PIN);
|
||||
LL_GPIO_SetPinMode(LED_GREEN_PORT, LED_GREEN_PIN, LL_GPIO_MODE_OUTPUT);
|
||||
LL_GPIO_SetPinOutputType(LED_GREEN_PORT, LED_GREEN_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||
LL_GPIO_SetOutputPin(LED_GREEN_PORT, LED_GREEN_PIN);
|
||||
LL_GPIO_SetPinMode(LED_BLUE_PORT, LED_BLUE_PIN, LL_GPIO_MODE_OUTPUT);
|
||||
LL_GPIO_SetPinOutputType(LED_BLUE_PORT, LED_BLUE_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||
LL_GPIO_SetOutputPin(LED_BLUE_PORT, LED_BLUE_PIN);
|
||||
}
|
||||
|
||||
void rtc_init() {
|
||||
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
|
||||
LL_PWR_EnableBkUpAccess();
|
||||
LL_RCC_EnableRTC();
|
||||
}
|
||||
|
||||
void lcd_backlight_on() {
|
||||
LL_GPIO_SetOutputPin(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN);
|
||||
}
|
||||
|
||||
void usb_wire_reset() {
|
||||
LL_GPIO_ResetOutputPin(BOOT_USB_PORT, BOOT_USB_PIN);
|
||||
LL_mDelay(10);
|
||||
LL_GPIO_SetOutputPin(BOOT_USB_PORT, BOOT_USB_PIN);
|
||||
}
|
||||
|
||||
void target_init() {
|
||||
clock_init();
|
||||
rtc_init();
|
||||
gpio_init();
|
||||
|
||||
usb_wire_reset();
|
||||
}
|
||||
|
||||
int target_is_dfu_requested() {
|
||||
if(LL_RTC_BAK_GetRegister(RTC, LL_RTC_BKP_DR0) == BOOT_REQUEST_DFU) {
|
||||
LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_NONE);
|
||||
return 1;
|
||||
}
|
||||
|
||||
if(LL_GPIO_IsInputPinSet(BOOT_DFU_PORT, BOOT_DFU_PIN)) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void target_switch(void* offset) {
|
||||
asm volatile("ldr r3, [%0] \n"
|
||||
"msr msp, r3 \n"
|
||||
"ldr r3, [%1] \n"
|
||||
"mov pc, r3 \n"
|
||||
:
|
||||
: "r"(offset), "r"(offset + 0x4)
|
||||
: "r3");
|
||||
}
|
||||
|
||||
void target_switch2dfu() {
|
||||
LL_GPIO_ResetOutputPin(LED_BLUE_PORT, LED_BLUE_PIN);
|
||||
// Remap memory to system bootloader
|
||||
LL_SYSCFG_SetRemapMemory(LL_SYSCFG_REMAP_SYSTEMFLASH);
|
||||
target_switch(0x0);
|
||||
}
|
||||
|
||||
void target_switch2os() {
|
||||
LL_GPIO_ResetOutputPin(LED_RED_PORT, LED_RED_PIN);
|
||||
SCB->VTOR = BOOT_ADDRESS + OS_OFFSET;
|
||||
target_switch((void*)(BOOT_ADDRESS + OS_OFFSET));
|
||||
}
|
|
@ -1,30 +0,0 @@
|
|||
TOOLCHAIN = arm
|
||||
|
||||
BOOT_ADDRESS = 0x08000000
|
||||
FW_ADDRESS = 0x08008000
|
||||
OS_OFFSET = 0x00008000
|
||||
FLASH_ADDRESS = 0x08000000
|
||||
|
||||
OPENOCD_OPTS = -f interface/stlink.cfg -c "transport select hla_swd" -f target/stm32l4x.cfg -c "init" -c "adapter speed 4000"
|
||||
BOOT_CFLAGS = -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
|
||||
MCU_FLAGS = -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
|
||||
|
||||
CFLAGS += $(MCU_FLAGS) $(BOOT_CFLAGS) -DSTM32L476xx -Wall -fdata-sections -ffunction-sections
|
||||
LDFLAGS += $(MCU_FLAGS) -specs=nosys.specs -specs=nano.specs
|
||||
|
||||
CUBE_DIR = ../lib/STM32CubeL4
|
||||
CUBE_CMSIS_DIR = $(CUBE_DIR)/Drivers/CMSIS
|
||||
CUBE_HAL_DIR = $(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver
|
||||
|
||||
ASM_SOURCES += $(CUBE_CMSIS_DIR)/Device/ST/STM32L4xx/Source/Templates/gcc/startup_stm32l476xx.s
|
||||
C_SOURCES += $(CUBE_CMSIS_DIR)/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c
|
||||
C_SOURCES += $(CUBE_HAL_DIR)/Src/stm32l4xx_ll_utils.c
|
||||
|
||||
CFLAGS += -I$(CUBE_CMSIS_DIR)/Include
|
||||
CFLAGS += -I$(CUBE_CMSIS_DIR)/Device/ST/STM32L4xx/Include
|
||||
CFLAGS += -I$(CUBE_HAL_DIR)/Inc
|
||||
LDFLAGS += -Ttargets/f2/STM32L476RGTx_FLASH.ld
|
||||
|
||||
ASM_SOURCES += $(wildcard $(TARGET_DIR)/*.s)
|
||||
C_SOURCES += $(wildcard $(TARGET_DIR)/*.c)
|
||||
CPP_SOURCES += $(wildcard $(TARGET_DIR)/*.cpp)
|
62032
debug/STM32L4x6.svd
62032
debug/STM32L4x6.svd
File diff suppressed because it is too large
Load diff
|
@ -1,77 +1,52 @@
|
|||
_Overview of Flipper firmware architecture:_
|
||||
|
||||
![FW arch](https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/flipper_fw_arch.png)
|
||||
|
||||
# Project structure
|
||||
|
||||
```
|
||||
.
|
||||
├── applications # Flipper applications
|
||||
├── assets # Assets: icons, animation
|
||||
├── bootloader # Bootloader make project
|
||||
├── core # Main feature like OS, HAL (target-independed)
|
||||
├── core-rs # Rust code
|
||||
├── debug # Debug helpers, configs and plugins
|
||||
├── docker # Docker toolchain container
|
||||
├── firmware # Firmware make project
|
||||
├── lib # Libs and 3rd parties
|
||||
├── make # Makefile scripts
|
||||
├── wiki # Documentation (wiki) generates from this files
|
||||
└── wiki_static # Static files for wiki
|
||||
```
|
||||
|
||||
# HAL
|
||||
|
||||
We use STM32 HAL/LL. Description available here: [dm00105879.pdf](https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/dm00105879-description-of-stm32f4-hal-and-ll-drivers-stmicroelectronics.pdf)
|
||||
|
||||
## Flipper HAL
|
||||
|
||||
Some flipper-specific implementation of gpio/HAL:
|
||||
|
||||
* Init gpio pin: `app_gpio_init`
|
||||
* Fast write gpio (inline): `app_gpio_write`
|
||||
* Fast read gpio (inline): `app_gpio_read`
|
||||
* Microsecond delay `delay_us`
|
||||
* Set PWM on timer's pin: `pwm_set`
|
||||
|
||||
Files location: `/app/app_hal.[ch]`
|
||||
|
||||
# Bootloader
|
||||
|
||||
For production targets('f2' and newer) bootloader must be flashed first.
|
||||
Bootloader must be flashed first.
|
||||
Detailed instruction on how to compile and flash it you can find in `bootloader` folder.
|
||||
|
||||
Production version is going to have following features:
|
||||
|
||||
- Hardware initialization
|
||||
- Firmware CRC check
|
||||
- Firmware update
|
||||
- Interactive UI
|
||||
- Boot process LED indicators
|
||||
- FS check
|
||||
- Recovery mode
|
||||
|
||||
# OS
|
||||
|
||||
CMSIS-RTOS2 over FreeRTOS
|
||||
|
||||
**[Timers map](Timers)**
|
||||
|
||||
# Platform code
|
||||
## Platform code
|
||||
|
||||
CMSIS, Freertos and HAL files are generated by CubeMX.
|
||||
You can find platform code for L476 version in `f2` folder:
|
||||
You can find platform code for STM32WB55 version in `f4` folder:
|
||||
|
||||
* `Inc` `Src` — CubeMX generated headers & code
|
||||
* `Middlewares/Third_Party/FreeRTOS/Source` — freeRTOS
|
||||
* `deploy.sh` — flash firmware to device
|
||||
* `STM32L476RGTx_FLASH.ld` — linker script
|
||||
* `startup_stm32l476xx.s` — board startup/initialization assembler code
|
||||
* `cube.ioc` — CubeMX project file
|
||||
```
|
||||
├── Inc # CubeMX generated headers
|
||||
├── Src # CubeMX generated code
|
||||
├── api-hal # Our HAL wrappers and platform specifics
|
||||
├── ble-glue # BLE specific code(Glue for STMWPAN)
|
||||
├── f4.ioc # CubeMX project file
|
||||
├── startup_stm32wb55xx_cm4.s # Board startup/initialization assembler code
|
||||
├── stm32wb55xx_flash_cm4*.ld # Linker scripts
|
||||
├── target.mk # Makefile include
|
||||
|
||||
You can regenerate platform code:
|
||||
```
|
||||
|
||||
Working with CubeMX:
|
||||
1. Download CubeMX from [st.com](https://www.st.com/en/development-tools/stm32cubemx.html)
|
||||
2. Open `*.ioc` file
|
||||
3. Do whatever you want to
|
||||
3. Click `generate code`
|
||||
4. After regenerating, look at git status, regenerating may broke some files.
|
||||
4. After regenerating, look at git status, regeneration may brake some files.
|
||||
5. Check one more time that things that you've changes are not covered in platform api-hal. Because you know...
|
||||
|
||||
# Flipper Universal Registry Implementation (FURI)
|
||||
|
||||
|
|
Loading…
Reference in a new issue