Furi: raise bkpt only if debug session initiated, add debug support for release builds (#1957)

* Fix hard crash on some custom firmwares in RELEASE mode
* Furi: anya wa erai, anya wa eleganto, raise bkpt only if debug session initiated, add debug support for release builds

Co-authored-by: DerSkythe <skif@skif.ws>
This commit is contained in:
あく 2022-11-01 19:27:25 +09:00 committed by GitHub
parent 85d341104f
commit 104a1998a5
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -1,6 +1,7 @@
#include "check.h" #include "check.h"
#include "common_defines.h" #include "common_defines.h"
#include <stm32wbxx.h>
#include <furi_hal_console.h> #include <furi_hal_console.h>
#include <furi_hal_power.h> #include <furi_hal_power.h>
#include <furi_hal_rtc.h> #include <furi_hal_rtc.h>
@ -24,16 +25,30 @@ PLACE_IN_SECTION("MB_MEM2") uint32_t __furi_check_registers[12] = {0};
: \ : \
: "memory"); : "memory");
// Restore registers and halt MCU /** Restore registers and halt MCU
#define RESTORE_REGISTERS_AND_HALT_MCU() \ *
asm volatile("ldr r12, =__furi_check_registers \n" \ * - Always use it with GET_MESSAGE_AND_STORE_REGISTERS
* - If debugger is(was) connected this routine will raise bkpt
* - If debugger is not connected then endless loop
*
*/
#define RESTORE_REGISTERS_AND_HALT_MCU(debug) \
register const bool r0 asm("r0") = debug; \
asm volatile("cbnz r0, with_debugger%= \n" \
"ldr r12, =__furi_check_registers\n" \
"ldm r12, {r0-r11} \n" \ "ldm r12, {r0-r11} \n" \
"loop%=: \n" \ "loop%=: \n" \
"bkpt 0x00 \n" \
"wfi \n" \ "wfi \n" \
"b loop%= \n" \ "b loop%= \n" \
"with_debugger%=: \n" \
"ldr r12, =__furi_check_registers\n" \
"ldm r12, {r0-r11} \n" \
"debug_loop%=: \n" \
"bkpt 0x00 \n" \
"wfi \n" \
"b debug_loop%= \n" \
: \ : \
: \ : "r"(r0) \
: "memory"); : "memory");
extern size_t xPortGetTotalHeapSize(void); extern size_t xPortGetTotalHeapSize(void);
@ -96,16 +111,19 @@ FURI_NORETURN void __furi_crash() {
} }
__furi_print_heap_info(); __furi_print_heap_info();
#ifdef FURI_DEBUG // Check if debug enabled by DAP
// https://developer.arm.com/documentation/ddi0403/d/Debug-Architecture/ARMv7-M-Debug/Debug-register-support-in-the-SCS/Debug-Halting-Control-and-Status-Register--DHCSR?lang=en
bool debug = CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk;
if(debug) {
furi_hal_console_puts("\r\nSystem halted. Connect debugger for more info\r\n"); furi_hal_console_puts("\r\nSystem halted. Connect debugger for more info\r\n");
furi_hal_console_puts("\033[0m\r\n"); furi_hal_console_puts("\033[0m\r\n");
RESTORE_REGISTERS_AND_HALT_MCU(); RESTORE_REGISTERS_AND_HALT_MCU(debug);
#else } else {
furi_hal_rtc_set_fault_data((uint32_t)__furi_check_message); furi_hal_rtc_set_fault_data((uint32_t)__furi_check_message);
furi_hal_console_puts("\r\nRebooting system.\r\n"); furi_hal_console_puts("\r\nRebooting system.\r\n");
furi_hal_console_puts("\033[0m\r\n"); furi_hal_console_puts("\033[0m\r\n");
furi_hal_power_reset(); furi_hal_power_reset();
#endif }
__builtin_unreachable(); __builtin_unreachable();
} }
@ -124,6 +142,11 @@ FURI_NORETURN void __furi_halt() {
furi_hal_console_puts(__furi_check_message); furi_hal_console_puts(__furi_check_message);
furi_hal_console_puts("\r\nSystem halted. Bye-bye!\r\n"); furi_hal_console_puts("\r\nSystem halted. Bye-bye!\r\n");
furi_hal_console_puts("\033[0m\r\n"); furi_hal_console_puts("\033[0m\r\n");
RESTORE_REGISTERS_AND_HALT_MCU();
// Check if debug enabled by DAP
// https://developer.arm.com/documentation/ddi0403/d/Debug-Architecture/ARMv7-M-Debug/Debug-register-support-in-the-SCS/Debug-Halting-Control-and-Status-Register--DHCSR?lang=en
bool debug = CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk;
RESTORE_REGISTERS_AND_HALT_MCU(debug);
__builtin_unreachable(); __builtin_unreachable();
} }