unleashed-firmware/firmware/targets/f3/api-hal/api-hal-resources.h

#pragma once
#include "main.h"
#include "flipper_v2.h"

#define DEBOUNCE_TICKS 10
#define GPIO_INPUT_PINS_COUNT 6

extern const GpioPin input_gpio[GPIO_INPUT_PINS_COUNT];
extern const bool input_invert[GPIO_INPUT_PINS_COUNT];

extern const GpioPin led_gpio[3];
extern const GpioPin backlight_gpio;
extern const GpioPin sd_cs_gpio;
extern const GpioPin vibro_gpio;
extern const GpioPin ibutton_gpio;
Firmware, Bootloader: add f3 target. (#215) * Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru> 2020-11-06 10:52:50 +00:00			`#pragma once`
			`#include "main.h"`
			`#include "flipper_v2.h"`

			`#define DEBOUNCE_TICKS 10`
			`#define GPIO_INPUT_PINS_COUNT 6`

			`extern const GpioPin input_gpio[GPIO_INPUT_PINS_COUNT];`
			`extern const bool input_invert[GPIO_INPUT_PINS_COUNT];`

			`extern const GpioPin led_gpio[3];`
sd detect pin feature (#222) * test sd detect pin * sd detect support for f2 board 2020-11-11 06:17:53 +00:00			`extern const GpioPin backlight_gpio;`
			`extern const GpioPin sd_cs_gpio;`
FL-186 Add vibro demo (#234) * add vibro demo * add F2 support 2020-11-12 19:26:49 +00:00			`extern const GpioPin vibro_gpio;`
split resources, fix format 2020-11-16 21:39:48 +00:00			`extern const GpioPin ibutton_gpio;`