unleashed-firmware/wiki/Testing.md

# Bootloader testcase

1. `# Clean flash`
2. `make -C bootloader flash` `# Load bootloader`
3.  `# reboot device`
    * Press right
    * Press left
    * Wait 0.1 s
    * Release left
    * Release right
4. Wait 0.5 s
5. `# Expect no FW`
    * Expect: no uart welcome message
    * Expect: red led on
    * Expect: no USB
6. `# reboot device and go to DFU`
    * Press left 
    * Press right
    * Wait 0.1 s
    * Release left
    * Wait 0.5 s 
    * Release right
7. Wait 0.5 s
8. `# Expect DFU`
    * Expect: blue led on
    * Expect: USB: DFU
9. `target_f2/deploy-dfu.sh` `# load FW`
10. `# reboot device`
    * Press right
    * Press left
    * Wait 0.1 s
    * Release left
    * Release right
11. Wait 0.5 s
12. `# Expect FW`
    * Expect: uart welcome message
    * Expect: USB Flipper CDC

# Input testcase

1. `docker-compose exec dev make -C target_f2 example_input_dump`
2. Flash
3. For x in ```
[
    (Up, "00"),
    (Down, "01"),
    (Right, "02"),
    (Left, "03"),
    (Ok, "04"),
    (Back, "05"),
]
```
    * Press ${x[0]}
    * wait 0.05
    * Expect: Uart: "event: ${x[1]} pressed"
    * wait 0.05
    * Release ${x[0]}
    * wait 0.05
    * Expect: Uart: "event: ${x[1]} released"
    * wait 0.05

TODO: add debouncing check (multiple press and check there is no multiple events)
Input handling and debouncing (#148) * Add input driver and definitions for target_f2 * Add input_dump example * Invert charge input * Fix back and left button configuration * remove input debug * input testing case * move header * lint code Co-authored-by: aanper <mail@s3f.ru> 2020-10-02 09:44:05 +03:00			`# Bootloader testcase`
Implement bootloader #137 (#142) * Boot: switch to DFU routines. Implements #132 part 1 of 2. * Boot: boot to DFU shortcut, hard reset USB on each boot. Implements #132 part 2 of 2. * Deploy scripts: fix path for deploy dfu. * Bootloader: initial version. Target_f2: rebase, update deployment scripts. * Bootloader: cleanup, refactor switch2 proc. Readme,wiki: document bootloader. * Wiki: deploy symlinks as files, bootloader info. * Target_f2: valid flash size in linker script. * Github CI: bootloader build and artifacts. * Bootloader: rename platforms to targets. * Bootloader: change dfu/os colors. * disable set -e * lint code * add bootloader testing page Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: aanper <mail@s3f.ru> 2020-10-01 02:05:04 +03:00
fix md 2020-10-01 02:09:52 +03:00			1. `# Clean flash`
fix md 2020-10-01 02:07:24 +03:00			2. `make -C bootloader flash` `# Load bootloader`
			3. `# reboot device`
fix md 2020-10-01 02:09:52 +03:00			`* Press right`
			`* Press left`
			`* Wait 0.1 s`
			`* Release left`
			`* Release right`
Implement bootloader #137 (#142) * Boot: switch to DFU routines. Implements #132 part 1 of 2. * Boot: boot to DFU shortcut, hard reset USB on each boot. Implements #132 part 2 of 2. * Deploy scripts: fix path for deploy dfu. * Bootloader: initial version. Target_f2: rebase, update deployment scripts. * Bootloader: cleanup, refactor switch2 proc. Readme,wiki: document bootloader. * Wiki: deploy symlinks as files, bootloader info. * Target_f2: valid flash size in linker script. * Github CI: bootloader build and artifacts. * Bootloader: rename platforms to targets. * Bootloader: change dfu/os colors. * disable set -e * lint code * add bootloader testing page Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: aanper <mail@s3f.ru> 2020-10-01 02:05:04 +03:00			`4. Wait 0.5 s`
fix md 2020-10-01 02:07:24 +03:00			5. `# Expect no FW`
fix md 2020-10-01 02:09:52 +03:00			`* Expect: no uart welcome message`
			`* Expect: red led on`
			`* Expect: no USB`
fix md 2020-10-01 02:07:24 +03:00			6. `# reboot device and go to DFU`
fix md 2020-10-01 02:09:52 +03:00			`* Press left`
			`* Press right`
			`* Wait 0.1 s`
			`* Release left`
			`* Wait 0.5 s`
			`* Release right`
Implement bootloader #137 (#142) * Boot: switch to DFU routines. Implements #132 part 1 of 2. * Boot: boot to DFU shortcut, hard reset USB on each boot. Implements #132 part 2 of 2. * Deploy scripts: fix path for deploy dfu. * Bootloader: initial version. Target_f2: rebase, update deployment scripts. * Bootloader: cleanup, refactor switch2 proc. Readme,wiki: document bootloader. * Wiki: deploy symlinks as files, bootloader info. * Target_f2: valid flash size in linker script. * Github CI: bootloader build and artifacts. * Bootloader: rename platforms to targets. * Bootloader: change dfu/os colors. * disable set -e * lint code * add bootloader testing page Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: aanper <mail@s3f.ru> 2020-10-01 02:05:04 +03:00			`7. Wait 0.5 s`
fix md 2020-10-01 02:07:24 +03:00			8. `# Expect DFU`
fix md 2020-10-01 02:09:52 +03:00			`* Expect: blue led on`
			`* Expect: USB: DFU`
fix md 2020-10-01 02:07:24 +03:00			9. `target_f2/deploy-dfu.sh` `# load FW`
			10. `# reboot device`
fix md 2020-10-01 02:09:52 +03:00			`* Press right`
			`* Press left`
			`* Wait 0.1 s`
			`* Release left`
			`* Release right`
Implement bootloader #137 (#142) * Boot: switch to DFU routines. Implements #132 part 1 of 2. * Boot: boot to DFU shortcut, hard reset USB on each boot. Implements #132 part 2 of 2. * Deploy scripts: fix path for deploy dfu. * Bootloader: initial version. Target_f2: rebase, update deployment scripts. * Bootloader: cleanup, refactor switch2 proc. Readme,wiki: document bootloader. * Wiki: deploy symlinks as files, bootloader info. * Target_f2: valid flash size in linker script. * Github CI: bootloader build and artifacts. * Bootloader: rename platforms to targets. * Bootloader: change dfu/os colors. * disable set -e * lint code * add bootloader testing page Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: aanper <mail@s3f.ru> 2020-10-01 02:05:04 +03:00			`11. Wait 0.5 s`
fix md 2020-10-01 02:07:24 +03:00			12. `# Expect FW`
fix md 2020-10-01 02:09:52 +03:00			`* Expect: uart welcome message`
Input handling and debouncing (#148) * Add input driver and definitions for target_f2 * Add input_dump example * Invert charge input * Fix back and left button configuration * remove input debug * input testing case * move header * lint code Co-authored-by: aanper <mail@s3f.ru> 2020-10-02 09:44:05 +03:00			`* Expect: USB Flipper CDC`

			`# Input testcase`

			1. `docker-compose exec dev make -C target_f2 example_input_dump`
			`2. Flash`
			3. For x in ```
			`[`
			`(Up, "00"),`
			`(Down, "01"),`
			`(Right, "02"),`
			`(Left, "03"),`
			`(Ok, "04"),`
			`(Back, "05"),`
			`]`
			```
			`* Press ${x[0]}`
			`* wait 0.05`
			`* Expect: Uart: "event: ${x[1]} pressed"`
			`* wait 0.05`
			`* Release ${x[0]}`
			`* wait 0.05`
			`* Expect: Uart: "event: ${x[1]} released"`
			`* wait 0.05`

			`TODO: add debouncing check (multiple press and check there is no multiple events)`