unleashed-firmware/firmware/targets/f3/Inc/usbd_cdc_if.h

135 lines
3 KiB
C
Raw Normal View History

Firmware, Bootloader: add f3 target. (#215) * Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 10:52:50 +00:00
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : usbd_cdc_if.h
* @version : v3.0_Cube
* @brief : Header for usbd_cdc_if.c file.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_CDC_IF_H__
#define __USBD_CDC_IF_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_cdc.h"
/* USER CODE BEGIN INCLUDE */
/* USER CODE END INCLUDE */
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @brief For Usb device.
* @{
*/
/** @defgroup USBD_CDC_IF USBD_CDC_IF
* @brief Usb VCP device module
* @{
*/
/** @defgroup USBD_CDC_IF_Exported_Defines USBD_CDC_IF_Exported_Defines
* @brief Defines.
* @{
*/
/* USER CODE BEGIN EXPORTED_DEFINES */
/* Define size for the receive and transmit buffer over CDC */
/* It's up to user to redefine and/or remove those define */
#define APP_RX_DATA_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
#define APP_TX_DATA_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
Firmware, Bootloader: add f3 target. (#215) * Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 10:52:50 +00:00
/* USER CODE END EXPORTED_DEFINES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Exported_Types USBD_CDC_IF_Exported_Types
* @brief Types.
* @{
*/
/* USER CODE BEGIN EXPORTED_TYPES */
/* USER CODE END EXPORTED_TYPES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Exported_Macros USBD_CDC_IF_Exported_Macros
* @brief Aliases.
* @{
*/
/* USER CODE BEGIN EXPORTED_MACRO */
/* USER CODE END EXPORTED_MACRO */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
* @brief Public variables.
* @{
*/
/** CDC Interface callback. */
extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
/* USER CODE BEGIN EXPORTED_VARIABLES */
/* USER CODE END EXPORTED_VARIABLES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype USBD_CDC_IF_Exported_FunctionsPrototype
* @brief Public functions declaration.
* @{
*/
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
/* USER CODE BEGIN EXPORTED_FUNCTIONS */
/* USER CODE END EXPORTED_FUNCTIONS */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USBD_CDC_IF_H__ */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/