unleashed-firmware/target_f2/Inc/main.h

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.h
  * @brief          : Header for main.c file.
  *                   This file contains the common defines of the application.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under Ultimate Liberty license
  * SLA0044, the "License"; You may not use this file except in compliance with
  * the License. You may obtain a copy of the License at:
  *                             www.st.com/SLA0044
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */

typedef enum { TimerEventInputCapture, TimerEventEndOfPulse } TimerEvent;

/* USER CODE END ET */

/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */

/* USER CODE END EC */

/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */

/* USER CODE END EM */

void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim);

/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);

/* USER CODE BEGIN EFP */

void register_tim8_callback_ch2(void (*callback)(uint16_t ccr, TimerEvent tim_event));

/* USER CODE END EFP */

/* Private defines -----------------------------------------------------------*/
#define BUTTON_BACK_Pin GPIO_PIN_13
#define BUTTON_BACK_GPIO_Port GPIOC
#define BUTTON_BACK_EXTI_IRQn EXTI15_10_IRQn
#define CHRG_Pin GPIO_PIN_2
#define CHRG_GPIO_Port GPIOC
#define CHRG_EXTI_IRQn EXTI2_IRQn
#define BATT_V_Pin GPIO_PIN_3
#define BATT_V_GPIO_Port GPIOC
#define IR_RX_Pin GPIO_PIN_0
#define IR_RX_GPIO_Port GPIOA
#define BUTTON_DOWN_Pin GPIO_PIN_1
#define BUTTON_DOWN_GPIO_Port GPIOA
#define BUTTON_DOWN_EXTI_IRQn EXTI1_IRQn
#define DISPLAY_DI_Pin GPIO_PIN_2
#define DISPLAY_DI_GPIO_Port GPIOA
#define SPEAKER_Pin GPIO_PIN_3
#define SPEAKER_GPIO_Port GPIOA
#define NFC_CS_Pin GPIO_PIN_4
#define NFC_CS_GPIO_Port GPIOC
#define RFID_RF_IN_Pin GPIO_PIN_5
#define RFID_RF_IN_GPIO_Port GPIOC
#define BUTTON_UP_Pin GPIO_PIN_0
#define BUTTON_UP_GPIO_Port GPIOB
#define BUTTON_UP_EXTI_IRQn EXTI0_IRQn
#define LED_BLUE_Pin GPIO_PIN_1
#define LED_BLUE_GPIO_Port GPIOB
#define DISPLAY_RST_Pin GPIO_PIN_10
#define DISPLAY_RST_GPIO_Port GPIOB
#define IR_TX_Pin GPIO_PIN_11
#define IR_TX_GPIO_Port GPIOB
#define RFID_OUT_Pin GPIO_PIN_13
#define RFID_OUT_GPIO_Port GPIOB
#define LED_GREEN_Pin GPIO_PIN_14
#define LED_GREEN_GPIO_Port GPIOB
#define RFID_PULL_Pin GPIO_PIN_15
#define RFID_PULL_GPIO_Port GPIOB
#define VIBRO_Pin GPIO_PIN_6
#define VIBRO_GPIO_Port GPIOC
#define iButton_Pin GPIO_PIN_7
#define iButton_GPIO_Port GPIOC
#define DISPLAY_CS_Pin GPIO_PIN_8
#define DISPLAY_CS_GPIO_Port GPIOC
#define SD_CS_Pin GPIO_PIN_9
#define SD_CS_GPIO_Port GPIOC
#define LED_RED_Pin GPIO_PIN_8
#define LED_RED_GPIO_Port GPIOA
#define TMS_Pin GPIO_PIN_13
#define TMS_GPIO_Port GPIOA
#define TCK_Pin GPIO_PIN_14
#define TCK_GPIO_Port GPIOA
#define CC1101_CS_Pin GPIO_PIN_15
#define CC1101_CS_GPIO_Port GPIOA
#define BUTTON_LEFT_Pin GPIO_PIN_4
#define BUTTON_LEFT_GPIO_Port GPIOB
#define BUTTON_LEFT_EXTI_IRQn EXTI4_IRQn
#define DISPLAY_BACKLIGHT_Pin GPIO_PIN_6
#define DISPLAY_BACKLIGHT_GPIO_Port GPIOB
#define CC1101_G0_Pin GPIO_PIN_7
#define CC1101_G0_GPIO_Port GPIOB
#define BUTTON_RIGHT_Pin GPIO_PIN_8
#define BUTTON_RIGHT_GPIO_Port GPIOB
#define BUTTON_RIGHT_EXTI_IRQn EXTI9_5_IRQn
#define BUTTON_OK_Pin GPIO_PIN_9
#define BUTTON_OK_GPIO_Port GPIOB
#define BUTTON_OK_EXTI_IRQn EXTI9_5_IRQn
/* USER CODE BEGIN Private defines */

#define LD2_Pin LED_RED_Pin
#define LD2_GPIO_Port LED_RED_GPIO_Port

#define EM_PIN_GPIO_Port RFID_OUT_GPIO_Port
#define EM_PIN_Pin RFID_OUT_Pin

#define MISO_PIN                          \
    GpioPin {                             \
        .port = GPIOC, .pin = GPIO_PIN_11 \
    }
// #define MOSI_PIN 11
#define SS_PIN                                            \
    GpioPin {                                             \
        .port = CC1101_CS_GPIO_Port, .pin = CC1101_CS_Pin \
    }
//2 main, 5 remote, 3 M16
#define GDO2                   \
    GpioPin {                  \
        .port = NULL, .pin = 0 \
    }
#define GDO0                                              \
    GpioPin {                                             \
        .port = CC1101_G0_GPIO_Port, .pin = CC1101_G0_Pin \
    }

/* USER CODE END Private defines */

#ifdef __cplusplus
}
#endif

#endif /* __MAIN_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/