unleashed-firmware/firmware/targets/f7/Src/system_stm32wbxx.c

/**
  ******************************************************************************
  * @file    system_stm32wbxx.c
  * @author  MCD Application Team
  * @brief   CMSIS Cortex Device Peripheral Access Layer System Source File
  *
  *   This file provides two functions and one global variable to be called from
  *   user application:
  *      - SystemInit(): This function is called at startup just after reset and
  *                      before branch to main program. This call is made inside
  *                      the "startup_stm32wbxx.s" file.
  *
  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
  *                                  by the user application to setup the SysTick
  *                                  timer or configure other parameters.
  *
  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
  *                                 be called whenever the core clock is changed
  *                                 during program execution.
  *
  *   After each device reset the MSI (4 MHz) is used as system clock source.
  *   Then SystemInit() function is called, in "startup_stm32wbxx.s" file, to
  *   configure the system clock before to branch to main program.
  *
  *   This file configures the system clock as follows:
  *=============================================================================
  *-----------------------------------------------------------------------------
  *        System Clock source                    | MSI
  *-----------------------------------------------------------------------------
  *        SYSCLK(Hz)                             | 4000000
  *-----------------------------------------------------------------------------
  *        HCLK(Hz)                               | 4000000
  *-----------------------------------------------------------------------------
  *        AHB Prescaler                          | 1
  *-----------------------------------------------------------------------------
  *        APB1 Prescaler                         | 1
  *-----------------------------------------------------------------------------
  *        APB2 Prescaler                         | 1
  *-----------------------------------------------------------------------------
  *        PLL_M                                  | 1
  *-----------------------------------------------------------------------------
  *        PLL_N                                  | 8
  *-----------------------------------------------------------------------------
  *        PLL_P                                  | 7
  *-----------------------------------------------------------------------------
  *        PLL_Q                                  | 2
  *-----------------------------------------------------------------------------
  *        PLL_R                                  | 2
  *-----------------------------------------------------------------------------
  *        PLLSAI1_P                              | NA
  *-----------------------------------------------------------------------------
  *        PLLSAI1_Q                              | NA
  *-----------------------------------------------------------------------------
  *        PLLSAI1_R                              | NA
  *-----------------------------------------------------------------------------
  *        Require 48MHz for USB OTG FS,          | Disabled
  *        SDIO and RNG clock                     |
  *-----------------------------------------------------------------------------
  *=============================================================================
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the 
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/** @addtogroup CMSIS
  * @{
  */

/** @addtogroup stm32WBxx_system
  * @{
  */

/** @addtogroup stm32WBxx_System_Private_Includes
  * @{
  */

#include "stm32wbxx.h"

#if !defined(HSE_VALUE)
#define HSE_VALUE (32000000UL) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */

#if !defined(MSI_VALUE)
#define MSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/
#endif /* MSI_VALUE */

#if !defined(HSI_VALUE)
#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */

#if !defined(LSI_VALUE)
#define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/
#endif /* LSI_VALUE */

#if !defined(LSE_VALUE)
#define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/
#endif /* LSE_VALUE */

/**
  * @}
  */

/** @addtogroup STM32WBxx_System_Private_TypesDefinitions
  * @{
  */

/**
  * @}
  */

/** @addtogroup STM32WBxx_System_Private_Defines
  * @{
  */

/*!< Uncomment the following line if you need to relocate your vector Table in
     Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET \
    OS_OFFSET /*!< Vector Table base offset field.
                                                     This value must be a multiple of 0x200. */

#define VECT_TAB_BASE_ADDRESS \
    SRAM1_BASE /*!< Vector Table base offset field.
                                                     This value must be a multiple of 0x200. */
/**
  * @}
  */

/** @addtogroup STM32WBxx_System_Private_Macros
  * @{
  */

/**
  * @}
  */

/** @addtogroup STM32WBxx_System_Private_Variables
  * @{
  */
/* The SystemCoreClock variable is updated in three ways:
      1) by calling CMSIS function SystemCoreClockUpdate()
      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
         Note: If you use this function to configure the system clock; then there
               is no need to call the 2 first functions listed above, since SystemCoreClock
               variable is updated automatically.
  */
uint32_t SystemCoreClock = 4000000UL; /*CPU1: M4 on MSI clock after startup (4MHz)*/

const uint32_t AHBPrescTable[16UL] =
    {1UL, 3UL, 5UL, 1UL, 1UL, 6UL, 10UL, 32UL, 2UL, 4UL, 8UL, 16UL, 64UL, 128UL, 256UL, 512UL};

const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL};

const uint32_t MSIRangeTable[16UL] = {
    100000UL,
    200000UL,
    400000UL,
    800000UL,
    1000000UL,
    2000000UL,
    4000000UL,
    8000000UL,
    16000000UL,
    24000000UL,
    32000000UL,
    48000000UL,
    0UL,
    0UL,
    0UL,
    0UL}; /* 0UL values are incorrect cases */

#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx)
const uint32_t SmpsPrescalerTable[4UL][6UL] = {
    {1UL, 3UL, 2UL, 2UL, 1UL, 2UL},
    {2UL, 6UL, 4UL, 3UL, 2UL, 4UL},
    {4UL, 12UL, 8UL, 6UL, 4UL, 8UL},
    {4UL, 12UL, 8UL, 6UL, 4UL, 8UL}};
#endif

/**
  * @}
  */

/** @addtogroup STM32WBxx_System_Private_FunctionPrototypes
  * @{
  */

/**
  * @}
  */

/** @addtogroup STM32WBxx_System_Private_Functions
  * @{
  */

/**
  * @brief  Setup the microcontroller system.
  * @param  None
  * @retval None
  */
void SystemInit(void) {
    /* Configure the Vector Table location add offset address ------------------*/
#if defined(VECT_TAB_SRAM) && defined(VECT_TAB_BASE_ADDRESS)
    /* program in SRAMx */
    SCB->VTOR = VECT_TAB_BASE_ADDRESS |
                VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAMx for CPU1 */
#else /* program in FLASH */
    SCB->VTOR = VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#endif

/* FPU settings ------------------------------------------------------------*/
#if(__FPU_PRESENT == 1) && (__FPU_USED == 1)
    SCB->CPACR |=
        ((3UL << (10UL * 2UL)) | (3UL << (11UL * 2UL))); /* set CP10 and CP11 Full Access */
#endif

    /* Reset the RCC clock configuration to the default reset state ------------*/
    /* Set MSION bit */
    RCC->CR |= RCC_CR_MSION;

    /* Reset CFGR register */
    RCC->CFGR = 0x00070000U;

    /* Reset PLLSAI1ON, PLLON, HSECSSON, HSEON, HSION, and MSIPLLON bits */
    RCC->CR &= (uint32_t)0xFAF6FEFBU;

    /*!< Reset LSI1 and LSI2 bits */
    RCC->CSR &= (uint32_t)0xFFFFFFFAU;

    /*!< Reset HSI48ON  bit */
    RCC->CRRCR &= (uint32_t)0xFFFFFFFEU;

    /* Reset PLLCFGR register */
    RCC->PLLCFGR = 0x22041000U;

#if defined(STM32WB55xx) || defined(STM32WB5Mxx)
    /* Reset PLLSAI1CFGR register */
    RCC->PLLSAI1CFGR = 0x22041000U;
#endif

    /* Reset HSEBYP bit */
    RCC->CR &= 0xFFFBFFFFU;

    /* Disable all interrupts */
    RCC->CIER = 0x00000000;
}

/**
  * @brief  Update SystemCoreClock variable according to Clock Register Values.
  *         The SystemCoreClock variable contains the core clock (HCLK), it can
  *         be used by the user application to setup the SysTick timer or configure
  *         other parameters.
  *
  * @note   Each time the core clock (HCLK) changes, this function must be called
  *         to update SystemCoreClock variable value. Otherwise, any configuration
  *         based on this variable will be incorrect.
  *
  * @note   - The system frequency computed by this function is not the real
  *           frequency in the chip. It is calculated based on the predefined
  *           constant and the selected clock source:
  *
  *           - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
  *
  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
  *
  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
  *
  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
  *             or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
  *
  *         (*) MSI_VALUE is a constant defined in stm32wbxx_hal.h file (default value
  *             4 MHz) but the real value may vary depending on the variations
  *             in voltage and temperature.
  *
  *         (**) HSI_VALUE is a constant defined in stm32wbxx_hal_conf.h file (default value
  *              16 MHz) but the real value may vary depending on the variations
  *              in voltage and temperature.
  *
  *         (***) HSE_VALUE is a constant defined in stm32wbxx_hal_conf.h file (default value
  *              32 MHz), user has to ensure that HSE_VALUE is same as the real
  *              frequency of the crystal used. Otherwise, this function may
  *              have wrong result.
  *
  *         - The result of this function could be not correct when using fractional
  *           value for HSE crystal.
  *
  * @param  None
  * @retval None
  */
void SystemCoreClockUpdate(void) {
    uint32_t tmp, msirange, pllvco, pllr, pllsource, pllm;

    /* Get MSI Range frequency--------------------------------------------------*/

    /*MSI frequency range in Hz*/
    msirange = MSIRangeTable[(RCC->CR & RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos];

    /* Get SYSCLK source -------------------------------------------------------*/
    switch(RCC->CFGR & RCC_CFGR_SWS) {
    case 0x00: /* MSI used as system clock source */
        SystemCoreClock = msirange;
        break;

    case 0x04: /* HSI used as system clock source */
        /* HSI used as system clock source */
        SystemCoreClock = HSI_VALUE;
        break;

    case 0x08: /* HSE used as system clock source */
        SystemCoreClock = HSE_VALUE;
        break;

    case 0x0C: /* PLL used as system clock  source */
        /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
         SYSCLK = PLL_VCO / PLLR
         */
        pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
        pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL;

        if(pllsource == 0x02UL) /* HSI used as PLL clock source */
        {
            pllvco = (HSI_VALUE / pllm);
        } else if(pllsource == 0x03UL) /* HSE used as PLL clock source */
        {
            pllvco = (HSE_VALUE / pllm);
        } else /* MSI used as PLL clock source */
        {
            pllvco = (msirange / pllm);
        }

        pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
        pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL);

        SystemCoreClock = pllvco / pllr;
        break;

    default:
        SystemCoreClock = msirange;
        break;
    }

    /* Compute HCLK clock frequency --------------------------------------------*/
    /* Get HCLK1 prescaler */
    tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)];
    /* HCLK clock frequency */
    SystemCoreClock = SystemCoreClock / tmp;
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/