mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 08:01:08 +00:00
ffee1dde3c
Fix PHY addresses for QSGMII Riser Card working in SGMII mode on board P3041/P5020/P4080/P5040/B4860. QSGMII Riser Card can work in SGMII mode, but having the different PHY addresses. So the following steps should be done: 1. Confirm whether QSGMII Riser Card is used. 2. If yes, set the proper PHY address. Generally, the function is_qsgmii_riser_card() is for step 1, and set_sgmii_phy() for step 2. However, there are still some special situations, take P5040 and B4860 as examples, the PHY addresses need to be changed when serdes protocol is changed, so it is necessary to confirm the protocol before setting PHY addresses. Signed-off-by: Zhao Qiang <B45475@freescale.com> |
||
|---|---|---|
| .. | ||
| corenet_ds.c | ||
| corenet_ds.h | ||
| ddr.c | ||
| eth_hydra.c | ||
| eth_p4080.c | ||
| eth_superhydra.c | ||
| Makefile | ||
| p3041ds_ddr.c | ||
| p4080ds_ddr.c | ||
| p5020ds_ddr.c | ||
| p5040ds_ddr.c | ||
| pbi.cfg | ||
| rcw_p2041rdb.cfg | ||
| rcw_p3041ds.cfg | ||
| rcw_p4080ds.cfg | ||
| rcw_p5020ds.cfg | ||
| rcw_p5040ds.cfg | ||