mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
5710d0a853
Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
197 lines
6.1 KiB
Text
197 lines
6.1 KiB
Text
if ARCH_K3
|
|
|
|
choice
|
|
prompt "Texas Instruments' K3 based SoC select"
|
|
optional
|
|
|
|
config SOC_K3_AM654
|
|
bool "TI's K3 based AM654 SoC Family Support"
|
|
|
|
config SOC_K3_J721E
|
|
bool "TI's K3 based J721E SoC Family Support"
|
|
|
|
config SOC_K3_J721S2
|
|
bool "TI's K3 based J721S2 SoC Family Support"
|
|
|
|
config SOC_K3_AM642
|
|
bool "TI's K3 based AM642 SoC Family Support"
|
|
|
|
config SOC_K3_AM625
|
|
bool "TI's K3 based AM625 SoC Family Support"
|
|
|
|
config SOC_K3_AM62A7
|
|
bool "TI's K3 based AM62A7 SoC Family Support"
|
|
|
|
endchoice
|
|
|
|
config SYS_SOC
|
|
default "k3"
|
|
|
|
config SYS_K3_NON_SECURE_MSRAM_SIZE
|
|
hex
|
|
default 0x80000 if SOC_K3_AM654
|
|
default 0x100000 if SOC_K3_J721E || SOC_K3_J721S2
|
|
default 0x1c0000 if SOC_K3_AM642
|
|
default 0x3c000 if SOC_K3_AM625 || SOC_K3_AM62A7
|
|
help
|
|
Describes the total size of the MCU or OCMC MSRAM present on
|
|
the SoC in use. This doesn't specify the total size of SPL as
|
|
ROM can use some part of this RAM. Once ROM gives control to
|
|
SPL then this complete size can be usable.
|
|
|
|
config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
|
|
hex
|
|
default 0x58000 if SOC_K3_AM654
|
|
default 0xc0000 if SOC_K3_J721E || SOC_K3_J721S2
|
|
default 0x180000 if SOC_K3_AM642
|
|
default 0x38000 if SOC_K3_AM625 || SOC_K3_AM62A7
|
|
help
|
|
Describes the maximum size of the image that ROM can download
|
|
from any boot media.
|
|
|
|
config SYS_K3_MCU_SCRATCHPAD_BASE
|
|
hex
|
|
default 0x40280000 if SOC_K3_AM654
|
|
default 0x41cff9fc if SOC_K3_J721S2
|
|
default 0x41cff9fc if SOC_K3_J721E
|
|
help
|
|
Describes the base address of MCU Scratchpad RAM.
|
|
|
|
config SYS_K3_MCU_SCRATCHPAD_SIZE
|
|
hex
|
|
default 0x200 if SOC_K3_AM654
|
|
default 0x200 if SOC_K3_J721E || SOC_K3_J721S2
|
|
help
|
|
Describes the size of MCU Scratchpad RAM.
|
|
|
|
config SYS_K3_BOOT_PARAM_TABLE_INDEX
|
|
hex
|
|
default 0x41c7fbfc if SOC_K3_AM654
|
|
default 0x41cffbfc if SOC_K3_J721E
|
|
default 0x41cfdbfc if SOC_K3_J721S2
|
|
default 0x701bebfc if SOC_K3_AM642
|
|
default 0x43c3f290 if SOC_K3_AM625
|
|
default 0x43c3f290 if SOC_K3_AM62A7 && CPU_V7R
|
|
default 0x7000f290 if SOC_K3_AM62A7 && ARM64
|
|
help
|
|
Address at which ROM stores the value which determines if SPL
|
|
is booted up by primary boot media or secondary boot media.
|
|
|
|
config SYS_K3_KEY
|
|
string "Key used to generate x509 certificate"
|
|
help
|
|
This option enables to provide a custom key that can be used for
|
|
generating x509 certificate for spl binary. If not needed leave
|
|
it blank so that a random key is generated and used.
|
|
|
|
config SYS_K3_BOOT_CORE_ID
|
|
int
|
|
default 16
|
|
|
|
config K3_EARLY_CONS
|
|
bool "Activate to allow for an early console during SPL"
|
|
depends on SPL
|
|
help
|
|
Turn this option on to enable an early console functionality in SPL
|
|
before the main console is being brought up. This can be useful in
|
|
situations where the main console is dependent on System Firmware
|
|
(SYSFW) being up and running, which is usually not the case during
|
|
the very early stages of boot. Using this early console functionality
|
|
will allow for an alternate serial port to be used to support things
|
|
like UART-based boot and early diagnostic messages until the main
|
|
console is ready to get activated.
|
|
|
|
config K3_EARLY_CONS_IDX
|
|
depends on K3_EARLY_CONS
|
|
int "Index of serial device to use for SPL early console"
|
|
default 1
|
|
help
|
|
Use this option to set the index of the serial device to be used
|
|
for the early console during SPL execution.
|
|
|
|
config K3_LOAD_SYSFW
|
|
bool
|
|
depends on SPL
|
|
|
|
config K3_SYSFW_IMAGE_NAME
|
|
string "File name of SYSFW firmware and configuration blob"
|
|
depends on K3_LOAD_SYSFW
|
|
default "sysfw.itb"
|
|
help
|
|
Filename of the combined System Firmware and configuration image tree
|
|
blob to be loaded when booting from a filesystem.
|
|
|
|
config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT
|
|
hex "MMC sector to load SYSFW firmware and configuration blob from"
|
|
depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
|
|
default 0x3600
|
|
help
|
|
Address on the MMC to load the combined System Firmware and
|
|
configuration image tree blob from, when the MMC is being used
|
|
in raw mode. Units: MMC sectors (1 sector = 512 bytes).
|
|
|
|
config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
|
|
hex "MMC partition to load SYSFW firmware and configuration blob from"
|
|
depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
|
|
default 2
|
|
help
|
|
Partition on the MMC to the combined System Firmware and configuration
|
|
image tree blob from, when the MMC is being used in raw mode.
|
|
|
|
config K3_SYSFW_IMAGE_SIZE_MAX
|
|
int "Amount of memory dynamically allocated for loading SYSFW blob"
|
|
depends on K3_LOAD_SYSFW
|
|
default 280000
|
|
help
|
|
Amount of memory (in bytes) reserved through dynamic allocation at
|
|
runtime for loading the combined System Firmware and configuration image
|
|
tree blob. Keep it as tight as possible, as this directly affects the
|
|
overall SPL memory footprint.
|
|
|
|
config K3_SYSFW_IMAGE_SPI_OFFS
|
|
hex "SPI offset of SYSFW firmware and configuration blob"
|
|
depends on K3_LOAD_SYSFW
|
|
default 0x6C0000
|
|
help
|
|
Offset of the combined System Firmware and configuration image tree
|
|
blob to be loaded when booting from a SPI flash memory.
|
|
|
|
config SYS_K3_SPL_ATF
|
|
bool "Start Cortex-A from SPL"
|
|
depends on SPL && CPU_V7R
|
|
help
|
|
Enabling this will try to start Cortex-A (typically with ATF)
|
|
after SPL from R5.
|
|
|
|
config K3_ATF_LOAD_ADDR
|
|
hex "Load address of ATF image"
|
|
default 0x70000000
|
|
help
|
|
The load address for the ATF image. This value defaults to 0x70000000
|
|
if not provided in the board defconfig file.
|
|
|
|
config K3_DM_FW
|
|
bool "Separate DM firmware image"
|
|
depends on SPL && CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_AM625 || SOC_K3_AM62A7) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
|
|
default y
|
|
help
|
|
Enabling this will indicate that the system has separate DM
|
|
and TIFS firmware images in place, instead of a single SYSFW
|
|
firmware. Due to DM being executed on the same core as R5 SPL
|
|
bootloader, it makes RM and PM services not being available
|
|
during R5 SPL execution time.
|
|
|
|
config K3_X509_SWRV
|
|
int "SWRV for X509 certificate used for boot images"
|
|
default 1
|
|
help
|
|
SWRV for X509 certificate used for boot images
|
|
|
|
source "arch/arm/mach-k3/am65x/Kconfig"
|
|
source "arch/arm/mach-k3/am64x/Kconfig"
|
|
source "arch/arm/mach-k3/am62x/Kconfig"
|
|
source "arch/arm/mach-k3/am62ax/Kconfig"
|
|
source "arch/arm/mach-k3/j721e/Kconfig"
|
|
source "arch/arm/mach-k3/j721s2/Kconfig"
|
|
|
|
endif
|