Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-25 12:33:41 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/toradex/colibri_imx7/colibri_imx7.c
Stefan Agner 46307ef01e board: colibri_imx7: use SDP if USB serial downloader has been used 
In case USB serial downloader has been used to load U-Boot start the
serial download protocol (SDP) emulation. This allows to download
complete images such as Toradex Easy Installer over USB SDP as well.
This code uses the boot ROM provided boot information to reliably
detect USB serial downloader.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09 13:09:29 +02:00

376 lines
9.2 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016-2018 Toradex AG
*/
#include <common.h>
#include <cpu_func.h>
#include <init.h>
#include <net.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx7-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/io.h>
#include <common.h>
#include <dm.h>
#include <dm/platform_data/serial_mxc.h>
#include <fdt_support.h>
#include <fsl_esdhc_imx.h>
#include <jffs2/load_kernel.h>
#include <linux/delay.h>
#include <linux/sizes.h>
#include <mmc.h>
#include <miiphy.h>
#include <mtd_node.h>
#include <netdev.h>
#include <power/pmic.h>
#include <power/rn5t567_pmic.h>
#include <usb.h>
#include <usb/ehci-ci.h>
#include "../common/tdx-common.h"
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \
PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM)
#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
PAD_CTL_DSE_3P3V_49OHM)
#define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM)
#define USB_CDET_GPIO IMX_GPIO_NR(7, 14)
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, imx_ddr_size());
return 0;
}
static iomux_v3_cfg_t const uart1_pads[] = {
MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
};
#ifdef CONFIG_USB_EHCI_MX7
static iomux_v3_cfg_t const usb_cdet_pads[] = {
MX7D_PAD_ENET1_CRS__GPIO7_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
#endif
#ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
static iomux_v3_cfg_t const gpmi_pads[] = {
MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_CLK__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_CMD__NAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_STROBE__NAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SD3_RESET_B__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
MX7D_PAD_SAI1_TX_DATA__NAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
};
static void setup_gpmi_nand(void)
{
imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
/* NAND_USDHC_BUS_CLK is set in rom */
set_clk_nand();
}
#endif
#ifdef CONFIG_DM_VIDEO
static iomux_v3_cfg_t const backlight_pads[] = {
/* Backlight On */
MX7D_PAD_SD1_WP__GPIO5_IO1 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* Backlight PWM<A> (multiplexed pin) */
MX7D_PAD_GPIO1_IO08__GPIO1_IO8 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
#define GPIO_BL_ON IMX_GPIO_NR(5, 1)
#define GPIO_PWM_A IMX_GPIO_NR(1, 8)
static int setup_lcd(void)
{
imx_iomux_v3_setup_multiple_pads(backlight_pads, ARRAY_SIZE(backlight_pads));
/* Set BL_ON */
gpio_request(GPIO_BL_ON, "BL_ON");
gpio_direction_output(GPIO_BL_ON, 1);
/* Set PWM<A> to full brightness (assuming inversed polarity) */
gpio_request(GPIO_PWM_A, "PWM<A>");
gpio_direction_output(GPIO_PWM_A, 0);
return 0;
}
#endif
/*
* Backlight off before OS handover
*/
void board_preboot_os(void)
{
#ifdef CONFIG_DM_VIDEO
gpio_direction_output(GPIO_PWM_A, 1);
gpio_direction_output(GPIO_BL_ON, 0);
#endif
}
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
}
#ifdef CONFIG_FEC_MXC
static int setup_fec(void)
{
struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
= (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
#ifndef CONFIG_COLIBRI_IMX7_EXT_PHYCLK
/*
* Use 50M anatop REF_CLK1 for ENET1, clear gpr1[13], set gpr1[17]
* and output it on the pin
*/
clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK,
IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK);
#else
/* Use 50M external CLK for ENET1, set gpr1[13], clear gpr1[17] */
clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK,
IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK);
#endif
return set_clk_enet(ENET_50MHZ);
}
#endif
int board_early_init_f(void)
{
setup_iomux_uart();
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
#ifdef CONFIG_FEC_MXC
setup_fec();
#endif
#ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
setup_gpmi_nand();
#endif
#ifdef CONFIG_USB_EHCI_MX7
imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads));
gpio_request(USB_CDET_GPIO, "usb-cdet-gpio");
#endif
return 0;
}
#ifdef CONFIG_DM_PMIC
int power_init_board(void)
{
struct udevice *dev;
int reg, ver;
int ret;
ret = pmic_get("rn5t567@33", &dev);
if (ret)
return ret;
ver = pmic_reg_read(dev, RN5T567_LSIVER);
reg = pmic_reg_read(dev, RN5T567_OTPVER);
printf("PMIC: RN5T567 LSIVER=0x%02x OTPVER=0x%02x\n", ver, reg);
/* set judge and press timer of N_OE to minimal values */
pmic_clrsetbits(dev, RN5T567_NOETIMSETCNT, 0x7, 0);
/* configure sleep slot for 3.3V Ethernet */
reg = pmic_reg_read(dev, RN5T567_LDO1_SLOT);
reg = (reg & 0xf0) | reg >> 4;
pmic_reg_write(dev, RN5T567_LDO1_SLOT, reg);
/* disable DCDC2 discharge to avoid backfeeding through VFB2 */
pmic_clrsetbits(dev, RN5T567_DC2CTL, 0x2, 0);
/* configure sleep slot for ARM rail */
reg = pmic_reg_read(dev, RN5T567_DC2_SLOT);
reg = (reg & 0xf0) | reg >> 4;
pmic_reg_write(dev, RN5T567_DC2_SLOT, reg);
/* disable LDO2 discharge to avoid backfeeding from +V3.3_SD */
pmic_clrsetbits(dev, RN5T567_LDODIS1, 0x2, 0);
return 0;
}
void reset_cpu(void)
{
struct udevice *dev;
pmic_get("rn5t567@33", &dev);
/* Use PMIC to reset, set REPWRTIM to 0 and REPWRON to 1 */
pmic_reg_write(dev, RN5T567_REPCNT, 0x1);
pmic_reg_write(dev, RN5T567_SLPCNT, 0x1);
/*
* Re-power factor detection on PMIC side is not instant. 1ms
* proved to be enough time until reset takes effect.
*/
mdelay(1);
}
#endif
int checkboard(void)
{
printf("Model: Toradex Colibri iMX7%c\n",
is_cpu_type(MXC_CPU_MX7D) ? 'D' : 'S');
return 0;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, struct bd_info *bd)
{
#if defined(CONFIG_IMX_BOOTAUX) && defined(CONFIG_ARCH_FIXUP_FDT_MEMORY)
int up;
up = arch_auxiliary_core_check_up(0);
if (up) {
int ret;
int areas = 1;
u64 start[2], size[2];
/*
* Reserve 1MB of memory for M4 (1MiB is also the minimum
* alignment for Linux due to MMU section size restrictions).
*/
start[0] = gd->bd->bi_dram[0].start;
size[0] = SZ_256M - SZ_1M;
/* If needed, create a second entry for memory beyond 256M */
if (gd->bd->bi_dram[0].size > SZ_256M) {
start[1] = gd->bd->bi_dram[0].start + SZ_256M;
size[1] = gd->bd->bi_dram[0].size - SZ_256M;
areas = 2;
}
ret = fdt_set_usable_memory(blob, start, size, areas);
if (ret) {
eprintf("Cannot set usable memory\n");
return ret;
}
} else {
int off;
off = fdt_node_offset_by_compatible(blob, -1,
"fsl,imx7d-rpmsg");
if (off > 0)
fdt_status_disabled(blob, off);
}
#endif
#if defined(CONFIG_FDT_FIXUP_PARTITIONS)
static const struct node_info nodes[] = {
{ "fsl,imx7d-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
{ "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, },
};
/* Update partition nodes using info from mtdparts env var */
puts(" Updating MTD partitions...\n");
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
return ft_common_board_setup(blob, bd);
}
#endif
#ifdef CONFIG_USB_EHCI_MX7
static iomux_v3_cfg_t const usb_otg2_pads[] = {
MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
};
int board_ehci_hcd_init(int port)
{
switch (port) {
case 0:
break;
case 1:
if (is_cpu_type(MXC_CPU_MX7S))
return -ENODEV;
imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
ARRAY_SIZE(usb_otg2_pads));
break;
default:
return -EINVAL;
}
return 0;
}
int board_usb_phy_mode(int port)
{
switch (port) {
case 0:
if (gpio_get_value(USB_CDET_GPIO))
return USB_INIT_DEVICE;
else
return USB_INIT_HOST;
case 1:
default:
return USB_INIT_HOST;
}
}
#if defined(CONFIG_BOARD_LATE_INIT)
int board_late_init(void)
{
#if defined(CONFIG_DM_VIDEO)
setup_lcd();
#endif
#if defined(CONFIG_CMD_USB_SDP)
if (is_boot_from_usb()) {
printf("Serial Downloader recovery mode, using sdp command\n");
env_set("bootdelay", "0");
env_set("bootcmd", "sdp 0");
}
#endif
return 0;
}
#endif /* CONFIG_BOARD_LATE_INIT */
#endif
Reference in a new issue View git blame Copy permalink