u-boot/test/dm/spmi.c
Simon Glass e180c2b129 dm: Rename DM test flags to make them more generic
The test flags used by driver model are currently not available to other
tests. Rather than creating two sets of flags, make these flags generic
by changing the DM_ prefix to UT_ and moving them to the test.h header.

This will allow adding other test flags without confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07 22:31:32 -04:00

113 lines
2.9 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
*/
#include <common.h>
#include <fdtdec.h>
#include <dm.h>
#include <malloc.h>
#include <dm/device.h>
#include <dm/root.h>
#include <dm/test.h>
#include <dm/util.h>
#include <power/pmic.h>
#include <spmi/spmi.h>
#include <asm/gpio.h>
#include <test/test.h>
#include <test/ut.h>
/* Test if bus childs got probed propperly*/
static int dm_test_spmi_probe(struct unit_test_state *uts)
{
const char *name = "spmi@0";
struct udevice *bus, *dev;
ut_assertok(uclass_get_device(UCLASS_SPMI, 0, &bus));
/* Check bus name */
ut_asserteq_str(name, bus->name);
/* Check that it has some devices */
ut_asserteq(device_has_children(bus), true);
ut_assertok(device_find_first_child(bus, &dev));
/* There should be at least one child */
ut_assertnonnull(dev);
/* Check that only PMICs are connected to the bus */
while (dev) {
ut_asserteq(device_get_uclass_id(dev), UCLASS_PMIC);
device_find_next_child(&dev);
}
return 0;
}
DM_TEST(dm_test_spmi_probe, UT_TESTF_SCAN_FDT);
/* Test if it's possible to read bus directly and indirectly */
static int dm_test_spmi_access(struct unit_test_state *uts)
{
const char *pmic_name = "pm8916@0";
struct udevice *bus, *pmic;
ut_assertok(uclass_get_device(UCLASS_SPMI, 0, &bus));
ut_assertok(device_get_child(bus, 0, &pmic));
/* Sanity check if it's proper PMIC */
ut_asserteq_str(pmic_name, pmic->name);
/* Read PMIC ID reg using SPMI bus - it assumes it has slaveID == 0*/
ut_asserteq(spmi_reg_read(bus, 0, 0xC0, 0x4), 0x10);
ut_asserteq(spmi_reg_read(bus, 0, 0xC0, 0x5), 0x5);
/* Read ID reg via pmic interface */
ut_asserteq(pmic_reg_read(pmic, 0xC004), 0x10);
ut_asserteq(pmic_reg_read(pmic, 0xC005), 0x5);
return 0;
}
DM_TEST(dm_test_spmi_access, UT_TESTF_SCAN_FDT);
/* Test if it's possible to access GPIO that should be in pmic */
static int dm_test_spmi_access_peripheral(struct unit_test_state *uts)
{
struct udevice *dev;
unsigned int offset, gpio;
const char *name;
int offset_count;
/* Get second pin of PMIC GPIO */
ut_assertok(gpio_lookup_name("spmi1", &dev, &offset, &gpio));
/* Check if PMIC is parent */
ut_asserteq(device_get_uclass_id(dev->parent), UCLASS_PMIC);
/* This should be second gpio */
ut_asserteq(1, offset);
name = gpio_get_bank_info(dev, &offset_count);
/* Check bank name */
ut_asserteq_str("spmi", name);
/* Check pin count */
ut_asserteq(4, offset_count);
ut_assertok(gpio_request(gpio, "testing"));
/* Try to set/clear gpio */
ut_assertok(gpio_direction_output(gpio, 0));
ut_asserteq(gpio_get_value(gpio), 0);
ut_assertok(gpio_direction_output(gpio, 1));
ut_asserteq(gpio_get_value(gpio), 1);
ut_assertok(gpio_direction_input(gpio));
ut_asserteq(gpio_get_value(gpio), 1);
ut_assertok(gpio_free(gpio));
return 0;
}
DM_TEST(dm_test_spmi_access_peripheral, UT_TESTF_SCAN_FDT);