mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
1eba723c72
LX2160AQDS is a development board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> [PK: Sqaush patch for "secure boot defconfig" & add maintainer] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
140 lines
3.7 KiB
C
140 lines
3.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2018-2019 NXP
|
|
*/
|
|
|
|
#ifndef __LX2_QDS_H
|
|
#define __LX2_QDS_H
|
|
|
|
#include "lx2160a_common.h"
|
|
|
|
/* Qixis */
|
|
#define QIXIS_XMAP_MASK 0x07
|
|
#define QIXIS_XMAP_SHIFT 5
|
|
#define QIXIS_RST_CTL_RESET_EN 0x30
|
|
#define QIXIS_LBMAP_DFLTBANK 0x00
|
|
#define QIXIS_LBMAP_ALTBANK 0x20
|
|
#define QIXIS_LBMAP_QSPI 0x00
|
|
#define QIXIS_RCW_SRC_QSPI 0xff
|
|
#define QIXIS_RST_CTL_RESET 0x31
|
|
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
|
|
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
|
|
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
|
|
#define QIXIS_LBMAP_MASK 0x0f
|
|
#define QIXIS_LBMAP_SD
|
|
#define QIXIS_RCW_SRC_SD 0x08
|
|
#define NON_EXTENDED_DUTCFG
|
|
#define QIXIS_SDID_MASK 0x07
|
|
#define QIXIS_ESDHC_NO_ADAPTER 0x7
|
|
|
|
/* SYSCLK */
|
|
#define QIXIS_SYSCLK_100 0x0
|
|
#define QIXIS_SYSCLK_125 0x1
|
|
#define QIXIS_SYSCLK_133 0x2
|
|
|
|
/* DDRCLK */
|
|
#define QIXIS_DDRCLK_100 0x0
|
|
#define QIXIS_DDRCLK_125 0x1
|
|
#define QIXIS_DDRCLK_133 0x2
|
|
|
|
#define BRDCFG4_EMI1SEL_MASK 0xF8
|
|
#define BRDCFG4_EMI1SEL_SHIFT 3
|
|
#define BRDCFG4_EMI2SEL_MASK 0x07
|
|
#define BRDCFG4_EMI2SEL_SHIFT 0
|
|
|
|
/* VID */
|
|
|
|
#define I2C_MUX_CH_VOL_MONITOR 0xA
|
|
/* Voltage monitor on channel 2*/
|
|
#define I2C_VOL_MONITOR_ADDR 0x63
|
|
#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
|
|
#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
|
|
#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
|
|
#define CONFIG_VID_FLS_ENV "lx2160aqds_vdd_mv"
|
|
#define CONFIG_VID
|
|
|
|
/* The lowest and highest voltage allowed*/
|
|
#define VDD_MV_MIN 775
|
|
#define VDD_MV_MAX 925
|
|
|
|
/* PM Bus commands code for LTC3882*/
|
|
#define PMBUS_CMD_PAGE 0x0
|
|
#define PMBUS_CMD_READ_VOUT 0x8B
|
|
#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
|
|
#define PMBUS_CMD_VOUT_COMMAND 0x21
|
|
#define PWM_CHANNEL0 0x0
|
|
|
|
#define CONFIG_VOL_MONITOR_LTC3882_SET
|
|
#define CONFIG_VOL_MONITOR_LTC3882_READ
|
|
|
|
/* RTC */
|
|
#define CONFIG_SYS_RTC_BUS_NUM 0
|
|
#define I2C_MUX_CH_RTC 0xB
|
|
|
|
/*
|
|
* MMC
|
|
*/
|
|
#ifdef CONFIG_MMC
|
|
#ifndef __ASSEMBLY__
|
|
u8 qixis_esdhc_detect_quirk(void);
|
|
#endif
|
|
#define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk()
|
|
#endif
|
|
|
|
/* MAC/PHY configuration */
|
|
#if defined(CONFIG_FSL_MC_ENET)
|
|
#define CONFIG_MII
|
|
#define CONFIG_ETHPRIME "DPMAC17@rgmii-id"
|
|
|
|
#define AQ_PHY_ADDR1 0x00
|
|
#define AQ_PHY_ADDR2 0x01
|
|
#define AQ_PHY_ADDR3 0x02
|
|
#define AQ_PHY_ADDR4 0x03
|
|
|
|
#define CORTINA_NO_FW_UPLOAD
|
|
#define CORTINA_PHY_ADDR1 0x0
|
|
|
|
#define INPHI_PHY_ADDR1 0x0
|
|
#define INPHI_PHY_ADDR2 0x1
|
|
|
|
#define RGMII_PHY_ADDR1 0x01
|
|
#define RGMII_PHY_ADDR2 0x02
|
|
|
|
#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
|
|
#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
|
|
#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
|
|
#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
|
|
|
|
#endif
|
|
|
|
/* EEPROM */
|
|
#define CONFIG_ID_EEPROM
|
|
#define CONFIG_SYS_I2C_EEPROM_NXID
|
|
#define CONFIG_SYS_EEPROM_BUS_NUM 0
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
EXTRA_ENV_SETTINGS \
|
|
"lx2160aqds_vdd_mv=800\0" \
|
|
"BOARD=lx2160aqds\0" \
|
|
"xspi_bootcmd=echo Trying load from flexspi..;" \
|
|
"sf probe 0:0 && sf read $load_addr " \
|
|
"$kernel_start $kernel_size ; env exists secureboot &&" \
|
|
"sf read $kernelheader_addr_r $kernelheader_start " \
|
|
"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
|
|
" bootm $load_addr#$BOARD\0" \
|
|
"sd_bootcmd=echo Trying load from sd card..;" \
|
|
"mmcinfo; mmc read $load_addr " \
|
|
"$kernel_addr_sd $kernel_size_sd ;" \
|
|
"env exists secureboot && mmc read $kernelheader_addr_r "\
|
|
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
|
|
" && esbc_validate ${kernelheader_addr_r};" \
|
|
"bootm $load_addr#$BOARD\0"
|
|
|
|
#include <asm/fsl_secure_boot.h>
|
|
|
|
#endif /* __LX2_QDS_H */
|