mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 14:53:06 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
425 lines
9.8 KiB
C
425 lines
9.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* Derived from drivers/spi/mpc8xxx_spi.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/soc.h>
|
|
#ifdef CONFIG_KIRKWOOD
|
|
#include <asm/arch/mpp.h>
|
|
#endif
|
|
#include <asm/arch-mvebu/spi.h>
|
|
|
|
static void _spi_cs_activate(struct kwspi_registers *reg)
|
|
{
|
|
setbits_le32(®->ctrl, KWSPI_CSN_ACT);
|
|
}
|
|
|
|
static void _spi_cs_deactivate(struct kwspi_registers *reg)
|
|
{
|
|
clrbits_le32(®->ctrl, KWSPI_CSN_ACT);
|
|
}
|
|
|
|
static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
unsigned int tmpdout, tmpdin;
|
|
int tm, isread = 0;
|
|
|
|
debug("spi_xfer: dout %p din %p bitlen %u\n", dout, din, bitlen);
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
_spi_cs_activate(reg);
|
|
|
|
/*
|
|
* handle data in 8-bit chunks
|
|
* TBD: 2byte xfer mode to be enabled
|
|
*/
|
|
clrsetbits_le32(®->cfg, KWSPI_XFERLEN_MASK, KWSPI_XFERLEN_1BYTE);
|
|
|
|
while (bitlen > 4) {
|
|
debug("loopstart bitlen %d\n", bitlen);
|
|
tmpdout = 0;
|
|
|
|
/* Shift data so it's msb-justified */
|
|
if (dout)
|
|
tmpdout = *(u32 *)dout & 0xff;
|
|
|
|
clrbits_le32(®->irq_cause, KWSPI_SMEMRDIRQ);
|
|
writel(tmpdout, ®->dout); /* Write the data out */
|
|
debug("*** spi_xfer: ... %08x written, bitlen %d\n",
|
|
tmpdout, bitlen);
|
|
|
|
/*
|
|
* Wait for SPI transmit to get out
|
|
* or time out (1 second = 1000 ms)
|
|
* The NE event must be read and cleared first
|
|
*/
|
|
for (tm = 0, isread = 0; tm < KWSPI_TIMEOUT; ++tm) {
|
|
if (readl(®->irq_cause) & KWSPI_SMEMRDIRQ) {
|
|
isread = 1;
|
|
tmpdin = readl(®->din);
|
|
debug("spi_xfer: din %p..%08x read\n",
|
|
din, tmpdin);
|
|
|
|
if (din) {
|
|
*((u8 *)din) = (u8)tmpdin;
|
|
din += 1;
|
|
}
|
|
if (dout)
|
|
dout += 1;
|
|
bitlen -= 8;
|
|
}
|
|
if (isread)
|
|
break;
|
|
}
|
|
if (tm >= KWSPI_TIMEOUT)
|
|
printf("*** spi_xfer: Time out during SPI transfer\n");
|
|
|
|
debug("loopend bitlen %d\n", bitlen);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
_spi_cs_deactivate(reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_SPI
|
|
|
|
static struct kwspi_registers *spireg =
|
|
(struct kwspi_registers *)MVEBU_SPI_BASE;
|
|
|
|
#ifdef CONFIG_KIRKWOOD
|
|
static u32 cs_spi_mpp_back[2];
|
|
#endif
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct spi_slave *slave;
|
|
u32 data;
|
|
#ifdef CONFIG_KIRKWOOD
|
|
static const u32 kwspi_mpp_config[2][2] = {
|
|
{ MPP0_SPI_SCn, 0 }, /* if cs == 0 */
|
|
{ MPP7_SPI_SCn, 0 } /* if cs != 0 */
|
|
};
|
|
#endif
|
|
|
|
if (!spi_cs_is_valid(bus, cs))
|
|
return NULL;
|
|
|
|
slave = spi_alloc_slave_base(bus, cs);
|
|
if (!slave)
|
|
return NULL;
|
|
|
|
writel(KWSPI_SMEMRDY, &spireg->ctrl);
|
|
|
|
/* calculate spi clock prescaller using max_hz */
|
|
data = ((CONFIG_SYS_TCLK / 2) / max_hz) + 0x10;
|
|
data = data < KWSPI_CLKPRESCL_MIN ? KWSPI_CLKPRESCL_MIN : data;
|
|
data = data > KWSPI_CLKPRESCL_MASK ? KWSPI_CLKPRESCL_MASK : data;
|
|
|
|
/* program spi clock prescaller using max_hz */
|
|
writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg);
|
|
debug("data = 0x%08x\n", data);
|
|
|
|
writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause);
|
|
writel(KWSPI_IRQMASK, &spireg->irq_mask);
|
|
|
|
#ifdef CONFIG_KIRKWOOD
|
|
/* program mpp registers to select SPI_CSn */
|
|
kirkwood_mpp_conf(kwspi_mpp_config[cs ? 1 : 0], cs_spi_mpp_back);
|
|
#endif
|
|
|
|
return slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
#ifdef CONFIG_KIRKWOOD
|
|
kirkwood_mpp_conf(cs_spi_mpp_back, NULL);
|
|
#endif
|
|
free(slave);
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_KW_SPI_MPP)
|
|
u32 spi_mpp_backup[4];
|
|
#endif
|
|
|
|
__attribute__((weak)) int board_spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
#if defined(CONFIG_SYS_KW_SPI_MPP)
|
|
u32 config;
|
|
u32 spi_mpp_config[4];
|
|
|
|
config = CONFIG_SYS_KW_SPI_MPP;
|
|
|
|
if (config & MOSI_MPP6)
|
|
spi_mpp_config[0] = MPP6_SPI_MOSI;
|
|
else
|
|
spi_mpp_config[0] = MPP1_SPI_MOSI;
|
|
|
|
if (config & SCK_MPP10)
|
|
spi_mpp_config[1] = MPP10_SPI_SCK;
|
|
else
|
|
spi_mpp_config[1] = MPP2_SPI_SCK;
|
|
|
|
if (config & MISO_MPP11)
|
|
spi_mpp_config[2] = MPP11_SPI_MISO;
|
|
else
|
|
spi_mpp_config[2] = MPP3_SPI_MISO;
|
|
|
|
spi_mpp_config[3] = 0;
|
|
spi_mpp_backup[3] = 0;
|
|
|
|
/* set new spi mpp and save current mpp config */
|
|
kirkwood_mpp_conf(spi_mpp_config, spi_mpp_backup);
|
|
#endif
|
|
|
|
return board_spi_claim_bus(slave);
|
|
}
|
|
|
|
__attribute__((weak)) void board_spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
#if defined(CONFIG_SYS_KW_SPI_MPP)
|
|
kirkwood_mpp_conf(spi_mpp_backup, NULL);
|
|
#endif
|
|
|
|
board_spi_release_bus(slave);
|
|
}
|
|
|
|
#ifndef CONFIG_SPI_CS_IS_VALID
|
|
/*
|
|
* you can define this function board specific
|
|
* define above CONFIG in board specific config file and
|
|
* provide the function in board specific src file
|
|
*/
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && (cs == 0 || cs == 1);
|
|
}
|
|
#endif
|
|
|
|
void spi_init(void)
|
|
{
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
_spi_cs_activate(spireg);
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
_spi_cs_deactivate(spireg);
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
return _spi_xfer(spireg, bitlen, dout, din, flags);
|
|
}
|
|
|
|
#else
|
|
|
|
/* Here now the DM part */
|
|
|
|
struct mvebu_spi_dev {
|
|
bool is_errata_50mhz_ac;
|
|
};
|
|
|
|
struct mvebu_spi_platdata {
|
|
struct kwspi_registers *spireg;
|
|
};
|
|
|
|
struct mvebu_spi_priv {
|
|
struct kwspi_registers *spireg;
|
|
};
|
|
|
|
static int mvebu_spi_set_speed(struct udevice *bus, uint hz)
|
|
{
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct kwspi_registers *reg = plat->spireg;
|
|
u32 data;
|
|
|
|
/* calculate spi clock prescaller using max_hz */
|
|
data = ((CONFIG_SYS_TCLK / 2) / hz) + 0x10;
|
|
data = data < KWSPI_CLKPRESCL_MIN ? KWSPI_CLKPRESCL_MIN : data;
|
|
data = data > KWSPI_CLKPRESCL_MASK ? KWSPI_CLKPRESCL_MASK : data;
|
|
|
|
/* program spi clock prescaler using max_hz */
|
|
writel(KWSPI_ADRLEN_3BYTE | data, ®->cfg);
|
|
debug("data = 0x%08x\n", data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mvebu_spi_50mhz_ac_timing_erratum(struct udevice *bus, uint mode)
|
|
{
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct kwspi_registers *reg = plat->spireg;
|
|
u32 data;
|
|
|
|
/*
|
|
* Erratum description: (Erratum NO. FE-9144572) The device
|
|
* SPI interface supports frequencies of up to 50 MHz.
|
|
* However, due to this erratum, when the device core clock is
|
|
* 250 MHz and the SPI interfaces is configured for 50MHz SPI
|
|
* clock and CPOL=CPHA=1 there might occur data corruption on
|
|
* reads from the SPI device.
|
|
* Erratum Workaround:
|
|
* Work in one of the following configurations:
|
|
* 1. Set CPOL=CPHA=0 in "SPI Interface Configuration
|
|
* Register".
|
|
* 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1
|
|
* Register" before setting the interface.
|
|
*/
|
|
data = readl(®->timing1);
|
|
data &= ~KW_SPI_TMISO_SAMPLE_MASK;
|
|
|
|
if (CONFIG_SYS_TCLK == 250000000 &&
|
|
mode & SPI_CPOL &&
|
|
mode & SPI_CPHA)
|
|
data |= KW_SPI_TMISO_SAMPLE_2;
|
|
else
|
|
data |= KW_SPI_TMISO_SAMPLE_1;
|
|
|
|
writel(data, ®->timing1);
|
|
}
|
|
|
|
static int mvebu_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct kwspi_registers *reg = plat->spireg;
|
|
const struct mvebu_spi_dev *drvdata;
|
|
u32 data = readl(®->cfg);
|
|
|
|
data &= ~(KWSPI_CPHA | KWSPI_CPOL | KWSPI_RXLSBF | KWSPI_TXLSBF);
|
|
|
|
if (mode & SPI_CPHA)
|
|
data |= KWSPI_CPHA;
|
|
if (mode & SPI_CPOL)
|
|
data |= KWSPI_CPOL;
|
|
if (mode & SPI_LSB_FIRST)
|
|
data |= (KWSPI_RXLSBF | KWSPI_TXLSBF);
|
|
|
|
writel(data, ®->cfg);
|
|
|
|
drvdata = (struct mvebu_spi_dev *)dev_get_driver_data(bus);
|
|
if (drvdata->is_errata_50mhz_ac)
|
|
mvebu_spi_50mhz_ac_timing_erratum(bus, mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
|
|
return _spi_xfer(plat->spireg, bitlen, dout, din, flags);
|
|
}
|
|
|
|
static int mvebu_spi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
|
|
/* Configure the chip-select in the CTRL register */
|
|
clrsetbits_le32(&plat->spireg->ctrl,
|
|
KWSPI_CS_MASK << KWSPI_CS_SHIFT,
|
|
spi_chip_select(dev) << KWSPI_CS_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_spi_probe(struct udevice *bus)
|
|
{
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct kwspi_registers *reg = plat->spireg;
|
|
|
|
writel(KWSPI_SMEMRDY, ®->ctrl);
|
|
writel(KWSPI_SMEMRDIRQ, ®->irq_cause);
|
|
writel(KWSPI_IRQMASK, ®->irq_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_spi_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
|
|
plat->spireg = (struct kwspi_registers *)devfdt_get_addr(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops mvebu_spi_ops = {
|
|
.claim_bus = mvebu_spi_claim_bus,
|
|
.xfer = mvebu_spi_xfer,
|
|
.set_speed = mvebu_spi_set_speed,
|
|
.set_mode = mvebu_spi_set_mode,
|
|
/*
|
|
* cs_info is not needed, since we require all chip selects to be
|
|
* in the device tree explicitly
|
|
*/
|
|
};
|
|
|
|
static const struct mvebu_spi_dev armada_xp_spi_dev_data = {
|
|
.is_errata_50mhz_ac = false,
|
|
};
|
|
|
|
static const struct mvebu_spi_dev armada_375_spi_dev_data = {
|
|
.is_errata_50mhz_ac = false,
|
|
};
|
|
|
|
static const struct mvebu_spi_dev armada_380_spi_dev_data = {
|
|
.is_errata_50mhz_ac = true,
|
|
};
|
|
|
|
static const struct udevice_id mvebu_spi_ids[] = {
|
|
{
|
|
.compatible = "marvell,armada-375-spi",
|
|
.data = (ulong)&armada_375_spi_dev_data
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-380-spi",
|
|
.data = (ulong)&armada_380_spi_dev_data
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-xp-spi",
|
|
.data = (ulong)&armada_xp_spi_dev_data
|
|
},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mvebu_spi) = {
|
|
.name = "mvebu_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = mvebu_spi_ids,
|
|
.ops = &mvebu_spi_ops,
|
|
.ofdata_to_platdata = mvebu_spi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct mvebu_spi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct mvebu_spi_priv),
|
|
.probe = mvebu_spi_probe,
|
|
};
|
|
#endif
|