mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
265 lines
6.8 KiB
C
265 lines
6.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuration for Xilinx ZynqMP
|
|
* (C) Copyright 2014 - 2015 Xilinx, Inc.
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*
|
|
* Based on Configuration for Versatile Express
|
|
*/
|
|
|
|
#ifndef __XILINX_ZYNQMP_H
|
|
#define __XILINX_ZYNQMP_H
|
|
|
|
#define CONFIG_REMAKE_ELF
|
|
|
|
/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
|
|
|
|
/* Generic Interrupt Controller Definitions */
|
|
#define CONFIG_GICV2
|
|
#define GICD_BASE 0xF9010000
|
|
#define GICC_BASE 0xF9020000
|
|
|
|
#ifndef CONFIG_SYS_MEMTEST_SCRATCH
|
|
# define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
|
|
#endif
|
|
|
|
#ifndef CONFIG_NR_DRAM_BANKS
|
|
# define CONFIG_NR_DRAM_BANKS 2
|
|
#endif
|
|
#define CONFIG_SYS_MEMTEST_START 0
|
|
#define CONFIG_SYS_MEMTEST_END 1000
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
|
|
|
|
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
|
|
#if !defined(COUNTER_FREQUENCY)
|
|
# define COUNTER_FREQUENCY 100000000
|
|
#endif
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
|
|
|
|
/* Serial setup */
|
|
#define CONFIG_ARM_DCC
|
|
#define CONFIG_CPU_ARMV8
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{ 4800, 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/* Command line configuration */
|
|
#define CONFIG_MP
|
|
|
|
/* BOOTP options */
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_MAY_FAIL
|
|
|
|
#if defined(CONFIG_MMC_SDHCI_ZYNQ)
|
|
# define CONFIG_SUPPORT_EMMC_BOOT
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_ARASAN
|
|
# define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
# define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
# define CONFIG_MTD_DEVICE
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
|
|
#endif
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x8000000
|
|
|
|
#if defined(CONFIG_ZYNQMP_USB)
|
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
#define CONFIG_USB_CABLE_CHECK
|
|
#define CONFIG_THOR_RESET_OFF
|
|
#define DFU_ALT_INFO_RAM \
|
|
"dfu_ram_info=" \
|
|
"setenv dfu_alt_info " \
|
|
"Image ram $kernel_addr $kernel_size\\\\;" \
|
|
"system.dtb ram $fdt_addr $fdt_size\0" \
|
|
"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
|
|
"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
|
|
|
|
#define DFU_ALT_INFO \
|
|
DFU_ALT_INFO_RAM
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
# define PARTS_DEFAULT \
|
|
"partitions=uuid_disk=${uuid_gpt_disk};" \
|
|
"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
|
|
"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
|
|
#endif
|
|
#endif
|
|
|
|
#if !defined(DFU_ALT_INFO)
|
|
# define DFU_ALT_INFO
|
|
#endif
|
|
|
|
#if !defined(PARTS_DEFAULT)
|
|
# define PARTS_DEFAULT
|
|
#endif
|
|
|
|
/* Do not preserve environment */
|
|
#define CONFIG_ENV_SIZE 0x8000
|
|
|
|
/* Monitor Command Prompt */
|
|
/* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_CBSIZE 2048
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
#define CONFIG_PANIC_HANG
|
|
#define CONFIG_SYS_MAXARGS 64
|
|
|
|
/* Ethernet driver */
|
|
#if defined(CONFIG_ZYNQ_GEM)
|
|
# define CONFIG_MII
|
|
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
# define PHY_ANEG_TIMEOUT 20000
|
|
#endif
|
|
|
|
/* I2C */
|
|
#if defined(CONFIG_SYS_I2C_ZYNQ)
|
|
# define CONFIG_SYS_I2C
|
|
#endif
|
|
|
|
/* EEPROM */
|
|
#ifdef CONFIG_ZYNQMP_EEPROM
|
|
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
|
|
# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
|
|
# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
|
# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
|
|
#endif
|
|
|
|
#ifdef CONFIG_SATA_CEVA
|
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
|
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
|
CONFIG_SYS_SCSI_MAX_LUN)
|
|
#endif
|
|
|
|
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
|
|
|
|
#define CONFIG_CLOCKS
|
|
|
|
#define ENV_MEM_LAYOUT_SETTINGS \
|
|
"fdt_high=10000000\0" \
|
|
"initrd_high=10000000\0" \
|
|
"fdt_addr_r=0x40000000\0" \
|
|
"pxefile_addr_r=0x10000000\0" \
|
|
"kernel_addr_r=0x18000000\0" \
|
|
"scriptaddr=0x02000000\0" \
|
|
"ramdisk_addr_r=0x02100000\0" \
|
|
|
|
#if defined(CONFIG_MMC_SDHCI_ZYNQ)
|
|
# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_MMC(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_SATA_CEVA)
|
|
# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_SCSI(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ZYNQMP_USB)
|
|
# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_USB(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
|
|
# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_PXE(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_DHCP)
|
|
# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_DHCP(func)
|
|
#endif
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
BOOT_TARGET_DEVICES_MMC(func) \
|
|
BOOT_TARGET_DEVICES_USB(func) \
|
|
BOOT_TARGET_DEVICES_SCSI(func) \
|
|
BOOT_TARGET_DEVICES_PXE(func) \
|
|
BOOT_TARGET_DEVICES_DHCP(func)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
/* Initial environment variables */
|
|
#ifndef CONFIG_EXTRA_ENV_SETTINGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
ENV_MEM_LAYOUT_SETTINGS \
|
|
BOOTENV \
|
|
DFU_ALT_INFO
|
|
#endif
|
|
|
|
/* SPL can't handle all huge variables - define just DFU */
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
|
|
#undef CONFIG_EXTRA_ENV_SETTINGS
|
|
# define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
|
|
"atf-uboot.ub ram 0x10000000 0x1000000;" \
|
|
"Image ram 0x80000 0x3f80000;" \
|
|
"system.dtb ram 0x4000000 0x100000\0" \
|
|
"dfu_bufsiz=0x1000\0"
|
|
#endif
|
|
|
|
#define CONFIG_SPL_TEXT_BASE 0xfffc0000
|
|
#define CONFIG_SPL_STACK 0xfffffffc
|
|
#define CONFIG_SPL_MAX_SIZE 0x40000
|
|
|
|
/* Just random location in OCM */
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x0
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
|
|
|
|
#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
|
|
# define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000
|
|
# define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000
|
|
# define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000
|
|
|
|
# define CONFIG_SYS_SPI_U_BOOT_OFFS 0x170000
|
|
#endif
|
|
|
|
/* u-boot is like dtb */
|
|
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
|
|
|
|
/* ATF is my kernel image */
|
|
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
|
|
|
|
/* FIT load address for RAM boot */
|
|
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
|
|
|
|
/* MMC support */
|
|
#ifdef CONFIG_MMC_SDHCI_ZYNQ
|
|
# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
|
|
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
|
|
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
|
|
# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
|
|
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
|
|
# undef CONFIG_CMD_BOOTD
|
|
# define CONFIG_SPL_ENV_SUPPORT
|
|
# define CONFIG_SPL_HASH_SUPPORT
|
|
# define CONFIG_ENV_MAX_ENTRIES 10
|
|
#endif
|
|
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x20000000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
|
|
|
|
#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
|
|
# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
|
|
#endif
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
#endif /* __XILINX_ZYNQMP_H */
|