mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
119 lines
3.6 KiB
C
119 lines
3.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuration settings for the VInCo platform.
|
|
*
|
|
* Based on the settings for the SAMA5-EK board
|
|
* Copyright (C) 2014 Atmel
|
|
* Bo Shen <voice.shen@atmel.com>
|
|
* Copyright (C) 2015 Free Electrons
|
|
* Gregory CLEMENT gregory.clement@free-electrons.com
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include "at91-sama5_common.h"
|
|
|
|
/* The value in the common file is too far away for the VInCo platform */
|
|
|
|
/* serial console */
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE 0xfc00c000
|
|
#define CONFIG_USART_ID 30
|
|
|
|
/* Timer */
|
|
#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x4000000
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
|
|
/* SerialFlash */
|
|
|
|
#ifdef CONFIG_CMD_SF
|
|
#define CONFIG_ATMEL_SPI0
|
|
#define CONFIG_SPI_FLASH_STMICRO
|
|
#define CONFIG_SF_DEFAULT_BUS 0
|
|
#define CONFIG_SF_DEFAULT_CS 0
|
|
#define CONFIG_SF_DEFAULT_SPEED 50000000
|
|
#define CONFIG_ENV_SPI_MAX_HZ 50000000
|
|
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
|
|
#define CONFIG_ENV_SPI_MODE (SPI_MODE_0)
|
|
#endif
|
|
|
|
/* MMC */
|
|
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
|
#define CONFIG_GENERIC_ATMEL_MCI
|
|
#define ATMEL_BASE_MMCI 0xfc000000
|
|
#define CONFIG_SYS_MMC_CLK_OD 500000
|
|
|
|
/* For generating MMC partitions */
|
|
|
|
#endif
|
|
|
|
/* USB device */
|
|
|
|
/* Ethernet Hardware */
|
|
#define CONFIG_PHY_SMSC
|
|
#define CONFIG_MACB
|
|
#define CONFIG_RMII
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
|
#define CONFIG_MACB_SEARCH_PHY
|
|
|
|
#ifdef CONFIG_SPI_BOOT
|
|
/* bootstrap + u-boot + env + linux in serial flash */
|
|
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
|
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
|
/* Use our own mapping for the VInCo platform */
|
|
#undef CONFIG_ENV_OFFSET
|
|
#undef CONFIG_ENV_SIZE
|
|
|
|
#define CONFIG_ENV_OFFSET 0x10000
|
|
#define CONFIG_ENV_SIZE 0x10000
|
|
|
|
/* Update the bootcommand according to our mapping for the VInCo platform */
|
|
#undef CONFIG_BOOTCOMMAND
|
|
#define CONFIG_BOOTCOMMAND "mmc dev 0 0;" \
|
|
"mmc read ${loadaddr} ${k_offset} ${k_blksize};" \
|
|
"mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
|
|
"bootz ${loadaddr} - ${oftaddr}"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"kernel_start=0x20000\0" \
|
|
"kernel_size=0x800000\0" \
|
|
"mmcblksize=0x200\0" \
|
|
"oftaddr=0x21000000\0" \
|
|
"loadaddr=0x22000000\0" \
|
|
"update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \
|
|
"sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \
|
|
"create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \
|
|
"setexpr rootfs_start ${kernel_start} + ${kernel_size};" \
|
|
"setenv partitions 'name=kernel,size=${kernel_size}," \
|
|
"start=${kernel_start};name=rootfs,size=-';" \
|
|
"gpt write mmc 0 ${partitions} \0"\
|
|
"f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \
|
|
"setexpr fileblksize ${fileblksize} + 1\0" \
|
|
"store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \
|
|
"setexpr k_blksize ${fileblksize};" \
|
|
"setexpr k_offset ${kernel_start} / ${mmcblksize};" \
|
|
"mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \
|
|
"store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \
|
|
"setexpr dtb_blksize ${fileblksize};" \
|
|
"setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \
|
|
"mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \
|
|
"store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \
|
|
"setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \
|
|
"mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \
|
|
"bootdelay=0\0"
|
|
|
|
#endif
|
|
|
|
#endif
|