mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
237 lines
7 KiB
C
237 lines
7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* (C) Copyright 2010
|
|
* Achim Ehrlich <aehrlich@taskit.de>
|
|
* taskit GmbH <www.taskit.de>
|
|
*
|
|
* (C) Copyright 2012
|
|
* Markus Hubig <mhubig@imko.de>
|
|
* IMKO GmbH <www.imko.de>
|
|
*
|
|
* (C) Copyright 2014
|
|
* Heiko Schocher <hs@denx.de>
|
|
* DENX Software Engineering GmbH
|
|
*
|
|
* Configuation settings for the smartweb.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* SoC must be defined first, before hardware.h is included.
|
|
* In this case SoC is defined in boards.cfg.
|
|
*/
|
|
#include <asm/hardware.h>
|
|
#include <linux/sizes.h>
|
|
|
|
/*
|
|
* Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot
|
|
* program. Since the linker has to swallow that define, we must use a pure
|
|
* hex number here!
|
|
*/
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */
|
|
|
|
/* misc settings */
|
|
#define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */
|
|
#define CONFIG_SETUP_MEMORY_TAGS /* pass memory defs to kernel */
|
|
#define CONFIG_INITRD_TAG /* pass initrd param to kernel */
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY /* U-Boot is loaded by a bootloader */
|
|
|
|
/* We set the max number of command args high to avoid HUSH bugs. */
|
|
#define CONFIG_SYS_MAXARGS 32
|
|
|
|
/* setting board specific options */
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_SMARTWEB
|
|
#define CONFIG_ENV_OVERWRITE 1 /* Overwrite ethaddr / serial# */
|
|
#define CONFIG_SYS_AUTOLOAD "yes"
|
|
#define CONFIG_RESET_TO_RETRY
|
|
|
|
/* The LED PINs */
|
|
#define CONFIG_RED_LED AT91_PIN_PA9
|
|
#define CONFIG_GREEN_LED AT91_PIN_PA6
|
|
|
|
/*
|
|
* SDRAM: 1 bank, 64 MB, base address 0x20000000
|
|
* Already initialized before u-boot gets started.
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
|
|
#define CONFIG_SYS_SDRAM_SIZE (64 * SZ_1M)
|
|
|
|
/*
|
|
* Perform a SDRAM Memtest from the start of SDRAM
|
|
* till the beginning of the U-Boot position in RAM.
|
|
*/
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN \
|
|
ROUND(3 * CONFIG_ENV_SIZE + (4 * SZ_1M), 0x1000)
|
|
|
|
/* NAND flash settings */
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
|
#define CONFIG_SYS_NAND_DBW_8
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
|
|
|
|
#define CONFIG_MTD_DEVICE
|
|
|
|
/* general purpose I/O */
|
|
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
|
#define CONFIG_AT91_GPIO /* enable the GPIO features */
|
|
#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
|
|
|
|
/* serial console */
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*
|
|
*/
|
|
#define CONFIG_MACB
|
|
#define CONFIG_RMII /* use reduced MII inteface */
|
|
#define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */
|
|
#define CONFIG_AT91_WANTS_COMMON_PHY
|
|
|
|
/* BOOTP and DHCP options */
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv autoload yes; setenv autoboot yes; " \
|
|
"setenv bootargs ${basicargs} ${mtdparts} " \
|
|
"root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; " \
|
|
"dhcp"
|
|
|
|
/* Enable the watchdog */
|
|
#define CONFIG_AT91SAM9_WATCHDOG
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_HW_WATCHDOG
|
|
#endif
|
|
#define CONFIG_AT91_HW_WDT_TIMEOUT 15
|
|
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
/* USB configuration */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
|
|
/* USB DFU support */
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
|
|
#define CONFIG_USB_GADGET_AT91
|
|
|
|
/* DFU class support */
|
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M
|
|
#define DFU_MANIFEST_POLL_TIMEOUT 25000
|
|
#endif
|
|
|
|
/* General Boot Parameter */
|
|
#define CONFIG_BOOTCOMMAND "run flashboot"
|
|
#define CONFIG_SYS_CBSIZE 512
|
|
|
|
/*
|
|
* RAM Memory address where to put the
|
|
* Linux Kernel befor starting.
|
|
*/
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000
|
|
|
|
/*
|
|
* The NAND Flash partitions:
|
|
*/
|
|
#define CONFIG_ENV_OFFSET (0x100000)
|
|
#define CONFIG_ENV_OFFSET_REDUND (0x180000)
|
|
#define CONFIG_ENV_RANGE (SZ_512K)
|
|
#define CONFIG_ENV_SIZE (SZ_128K)
|
|
|
|
/*
|
|
* Predefined environment variables.
|
|
* Usefull to define some easy to use boot commands.
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
\
|
|
"basicargs=console=ttyS0,115200\0" \
|
|
\
|
|
"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0x301000
|
|
#define CONFIG_SPL_STACK_R
|
|
#define CONFIG_SPL_STACK_R_ADDR CONFIG_SYS_TEXT_BASE
|
|
#else
|
|
/*
|
|
* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
|
|
* leaving the correct space for initial global data structure above that
|
|
* address while providing maximum stack area below.
|
|
*/
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
|
|
#endif
|
|
|
|
/* Defines for SPL */
|
|
#define CONFIG_SPL_TEXT_BASE 0x0
|
|
#define CONFIG_SPL_MAX_SIZE (SZ_4K)
|
|
|
|
#define CONFIG_SPL_BSS_START_ADDR CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SPL_BSS_MAX_SIZE (SZ_16K)
|
|
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
|
|
CONFIG_SPL_BSS_MAX_SIZE)
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
|
|
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
|
|
#define CONFIG_SYS_USE_NANDFLASH 1
|
|
#define CONFIG_SPL_NAND_DRIVERS
|
|
#define CONFIG_SPL_NAND_BASE
|
|
#define CONFIG_SPL_NAND_ECC
|
|
#define CONFIG_SPL_NAND_RAW_ONLY
|
|
#define CONFIG_SPL_NAND_SOFTECC
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
|
|
#define CONFIG_SYS_NAND_SIZE (SZ_256M)
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K)
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCSIZE 256
|
|
#define CONFIG_SYS_NAND_ECCBYTES 3
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
|
|
48, 49, 50, 51, 52, 53, 54, 55, \
|
|
56, 57, 58, 59, 60, 61, 62, 63, }
|
|
|
|
#define CONFIG_SPL_ATMEL_SIZE
|
|
#define CONFIG_SYS_MASTER_CLOCK (198656000/2)
|
|
#define AT91_PLL_LOCK_TIMEOUT 1000000
|
|
#define CONFIG_SYS_AT91_PLLA 0x2060bf09
|
|
#define CONFIG_SYS_MCKR 0x100
|
|
#define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR)
|
|
#define CONFIG_SYS_AT91_PLLB 0x10483f0e
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_SYS_ICACHE_OFF
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
#endif
|
|
#endif /* __CONFIG_H */
|