mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
1760 lines
46 KiB
C
1760 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2013 Gateworks Corporation
|
|
*
|
|
* Author: Tim Harvey <tharvey@gateworks.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <env.h>
|
|
#include <fsl_esdhc_imx.h>
|
|
#include <hwconfig.h>
|
|
#include <linux/delay.h>
|
|
#include <power/pmic.h>
|
|
#include <power/ltc3676_pmic.h>
|
|
#include <power/pfuze100_pmic.h>
|
|
|
|
#include "common.h"
|
|
|
|
/* UART2: Serial Console */
|
|
static iomux_v3_cfg_t const uart2_pads[] = {
|
|
IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
};
|
|
|
|
void setup_iomux_uart(void)
|
|
{
|
|
SETUP_IOMUX_PADS(uart2_pads);
|
|
}
|
|
|
|
/* MMC */
|
|
static iomux_v3_cfg_t const gw5904_emmc_pads[] = {
|
|
IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
};
|
|
/* 4-bit microSD on SD2 */
|
|
static iomux_v3_cfg_t const gw5904_mmc_pads[] = {
|
|
IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
/* CD */
|
|
IOMUX_PADS(PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
};
|
|
/* 8-bit eMMC on SD2/NAND */
|
|
static iomux_v3_cfg_t const gw560x_emmc_sd2_pads[] = {
|
|
IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const usdhc3_pads[] = {
|
|
IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
};
|
|
|
|
/*
|
|
* I2C pad configs:
|
|
* I2C1: GSC
|
|
* I2C2: PMIC,PCIe Switch,Clock,Mezz
|
|
* I2C3: Multimedia/Expansion
|
|
*/
|
|
static struct i2c_pads_info mx6q_i2c_pad_info[] = {
|
|
{
|
|
.scl = {
|
|
.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
|
|
.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
|
|
.gp = IMX_GPIO_NR(3, 21)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
|
|
.gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
|
|
.gp = IMX_GPIO_NR(3, 28)
|
|
}
|
|
}, {
|
|
.scl = {
|
|
.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
|
|
.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
|
|
.gp = IMX_GPIO_NR(4, 12)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
|
|
.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
|
|
.gp = IMX_GPIO_NR(4, 13)
|
|
}
|
|
}, {
|
|
.scl = {
|
|
.i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
|
|
.gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
|
|
.gp = IMX_GPIO_NR(1, 3)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC,
|
|
.gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC,
|
|
.gp = IMX_GPIO_NR(1, 6)
|
|
}
|
|
}
|
|
};
|
|
|
|
static struct i2c_pads_info mx6dl_i2c_pad_info[] = {
|
|
{
|
|
.scl = {
|
|
.i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
|
|
.gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
|
|
.gp = IMX_GPIO_NR(3, 21)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
|
|
.gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
|
|
.gp = IMX_GPIO_NR(3, 28)
|
|
}
|
|
}, {
|
|
.scl = {
|
|
.i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
|
|
.gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
|
|
.gp = IMX_GPIO_NR(4, 12)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
|
|
.gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
|
|
.gp = IMX_GPIO_NR(4, 13)
|
|
}
|
|
}, {
|
|
.scl = {
|
|
.i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
|
|
.gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
|
|
.gp = IMX_GPIO_NR(1, 3)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC,
|
|
.gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC,
|
|
.gp = IMX_GPIO_NR(1, 6)
|
|
}
|
|
}
|
|
};
|
|
|
|
void setup_ventana_i2c(int i2c)
|
|
{
|
|
struct i2c_pads_info *p;
|
|
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
p = &mx6q_i2c_pad_info[i2c];
|
|
else
|
|
p = &mx6dl_i2c_pad_info[i2c];
|
|
|
|
setup_i2c(i2c, CONFIG_SYS_I2C_SPEED, 0x7f, p);
|
|
}
|
|
|
|
/*
|
|
* Baseboard specific GPIO
|
|
*/
|
|
static iomux_v3_cfg_t const gw51xx_gpio_pads[] = {
|
|
/* PANLEDG# */
|
|
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
|
|
/* PANLEDR# */
|
|
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
|
|
/* IOEXP_PWREN# */
|
|
IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
|
|
/* IOEXP_IRQ# */
|
|
IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
|
|
|
|
/* GPS_SHDN */
|
|
IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
|
|
/* VID_PWR */
|
|
IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
|
|
/* PCIESKT_WDIS# */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw52xx_gpio_pads[] = {
|
|
/* SD3_VSELECT */
|
|
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
|
|
/* RS232_EN# */
|
|
IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
|
|
/* MSATA_EN */
|
|
IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG),
|
|
/* PANLEDG# */
|
|
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
|
|
/* PANLEDR# */
|
|
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
|
|
/* IOEXP_PWREN# */
|
|
IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
|
|
/* IOEXP_IRQ# */
|
|
IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
|
|
/* CAN_STBY */
|
|
IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* GPS_SHDN */
|
|
IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | DIO_PAD_CFG),
|
|
/* USBOTG_SEL */
|
|
IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
|
|
/* VID_PWR */
|
|
IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
|
|
/* PCI_RST# (GW522x) */
|
|
IOMUX_PADS(PAD_EIM_D23__GPIO3_IO23 | DIO_PAD_CFG),
|
|
/* RS485_EN */
|
|
IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG),
|
|
/* PCIESKT_WDIS# */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw53xx_gpio_pads[] = {
|
|
/* SD3_VSELECT */
|
|
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
|
|
/* RS232_EN# */
|
|
IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
|
|
/* MSATA_EN */
|
|
IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG),
|
|
/* CAN_STBY */
|
|
IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
|
|
/* USB_HUBRST# */
|
|
IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
|
|
/* PANLEDG# */
|
|
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
|
|
/* PANLEDR# */
|
|
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* IOEXP_PWREN# */
|
|
IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
|
|
/* IOEXP_IRQ# */
|
|
IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
|
|
/* DIOI2C_DIS# */
|
|
IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
|
|
/* GPS_SHDN */
|
|
IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | DIO_PAD_CFG),
|
|
/* VID_EN */
|
|
IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
|
|
/* RS485_EN */
|
|
IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG),
|
|
/* PCIESKT_WDIS# */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw54xx_gpio_pads[] = {
|
|
/* SD3_VSELECT */
|
|
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
|
|
/* RS232_EN# */
|
|
IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
|
|
/* MSATA_EN */
|
|
IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG),
|
|
/* CAN_STBY */
|
|
IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
|
|
/* PANLEDG# */
|
|
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
|
|
/* PANLEDR# */
|
|
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* USB_HUBRST# */
|
|
IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16 | DIO_PAD_CFG),
|
|
/* MIPI_DIO */
|
|
IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | DIO_PAD_CFG),
|
|
/* RS485_EN */
|
|
IOMUX_PADS(PAD_EIM_D24__GPIO3_IO24 | DIO_PAD_CFG),
|
|
/* IOEXP_PWREN# */
|
|
IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
|
|
/* IOEXP_IRQ# */
|
|
IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
|
|
/* DIOI2C_DIS# */
|
|
IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
|
|
/* VID_EN */
|
|
IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
|
|
/* RS485_EN */
|
|
IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG),
|
|
/* PCIESKT_WDIS# */
|
|
IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw551x_gpio_pads[] = {
|
|
/* CAN_STBY */
|
|
IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
|
|
/* PANLED# */
|
|
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
|
|
/* PCIESKT_WDIS# */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw552x_gpio_pads[] = {
|
|
/* MSATA_EN */
|
|
IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG),
|
|
/* USBOTG_SEL */
|
|
IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
|
|
/* USB_HUBRST# */
|
|
IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
|
|
/* PANLEDG# */
|
|
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
|
|
/* PANLEDR# */
|
|
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
|
|
/* MX6_DIO[4:9] */
|
|
IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18 | DIO_PAD_CFG),
|
|
IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | DIO_PAD_CFG),
|
|
IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21 | DIO_PAD_CFG),
|
|
IOMUX_PADS(PAD_CSI0_DAT4__GPIO5_IO22 | DIO_PAD_CFG),
|
|
IOMUX_PADS(PAD_CSI0_DAT5__GPIO5_IO23 | DIO_PAD_CFG),
|
|
IOMUX_PADS(PAD_CSI0_DAT7__GPIO5_IO25 | DIO_PAD_CFG),
|
|
/* PCIEGBE1_OFF# */
|
|
IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | DIO_PAD_CFG),
|
|
/* PCIEGBE2_OFF# */
|
|
IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
|
|
/* PCIESKT_WDIS# */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw553x_gpio_pads[] = {
|
|
/* SD3_VSELECT */
|
|
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
|
|
/* PANLEDG# */
|
|
IOMUX_PADS(PAD_KEY_COL2__GPIO4_IO10 | DIO_PAD_CFG),
|
|
/* PANLEDR# */
|
|
IOMUX_PADS(PAD_KEY_ROW2__GPIO4_IO11 | DIO_PAD_CFG),
|
|
/* VID_PWR */
|
|
IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
|
|
/* PCIESKT_WDIS# */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw560x_gpio_pads[] = {
|
|
/* RS232_EN# */
|
|
IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
|
|
/* CAN_STBY */
|
|
IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
|
|
/* USB_HUBRST# */
|
|
IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
|
|
/* PANLEDG# */
|
|
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
|
|
/* PANLEDR# */
|
|
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* IOEXP_PWREN# */
|
|
IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
|
|
/* IOEXP_IRQ# */
|
|
IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
|
|
/* DIOI2C_DIS# */
|
|
IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
|
|
/* VID_EN */
|
|
IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_DISP0_DAT10__GPIO4_IO31 | DIO_PAD_CFG),
|
|
/* RS485_EN */
|
|
IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG),
|
|
/* PCIESKT_WDIS# */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
/* USBH2_PEN (OTG) */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* 12V0_PWR_EN */
|
|
IOMUX_PADS(PAD_DISP0_DAT5__GPIO4_IO26 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw5901_gpio_pads[] = {
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* ETH1_EN */
|
|
IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | DIO_PAD_CFG),
|
|
/* CAN_STBY */
|
|
IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
|
|
/* PMIC reset */
|
|
IOMUX_PADS(PAD_DISP0_DAT8__WDOG1_B | DIO_PAD_CFG),
|
|
/* COM_CFGA/B/C/D */
|
|
IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14 | DIO_PAD_CFG),
|
|
IOMUX_PADS(PAD_DISP0_DAT21__GPIO5_IO15 | DIO_PAD_CFG),
|
|
IOMUX_PADS(PAD_DISP0_DAT22__GPIO5_IO16 | DIO_PAD_CFG),
|
|
IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG),
|
|
/* ETI_IRQ# */
|
|
IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05 | DIO_PAD_CFG),
|
|
/* DIO_IRQ# */
|
|
IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
|
|
/* FIBER_SIGDET */
|
|
IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw5902_gpio_pads[] = {
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* CAN1_STBY */
|
|
IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
|
|
/* CAN2_STBY */
|
|
IOMUX_PADS(PAD_SD3_CLK__GPIO7_IO03 | DIO_PAD_CFG),
|
|
/* UART1_EN# */
|
|
IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
|
|
/* 5V_UVLO */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
/* ETI_IRQ# */
|
|
IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05 | DIO_PAD_CFG),
|
|
/* DIO_IRQ# */
|
|
IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
|
|
/* USBOTG_PEN */
|
|
IOMUX_PADS(PAD_EIM_D23__GPIO3_IO23 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw5903_gpio_pads[] = {
|
|
/* BKLT_12VEN */
|
|
IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
|
|
/* EMMY_PDN# */
|
|
IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | DIO_PAD_CFG),
|
|
/* EMMY_CFG1# */
|
|
IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03 | DIO_PAD_CFG),
|
|
/* EMMY_CFG1# */
|
|
IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04 | DIO_PAD_CFG),
|
|
/* USBH1_PEN (EHCI) */
|
|
IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
|
|
/* USBH2_PEN (OTG) */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* USBDPC_PEN */
|
|
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
|
|
/* TOUCH_RST */
|
|
IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG),
|
|
/* AUDIO_RST# */
|
|
IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG),
|
|
/* UART1_TEN# */
|
|
IOMUX_PADS(PAD_CSI0_DAT12__GPIO5_IO30 | DIO_PAD_CFG),
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
|
|
/* LVDS_BKLEN # */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
/* RGMII_PDWN# */
|
|
IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | DIO_PAD_CFG),
|
|
/* TOUCH_IRQ# */
|
|
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
|
|
/* TOUCH_RST# */
|
|
IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw5904_gpio_pads[] = {
|
|
/* USB_HUBRST# */
|
|
IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
|
|
/* PANLEDG# */
|
|
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
|
|
/* PANLEDR# */
|
|
IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
|
|
/* IOEXP_PWREN# */
|
|
IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
|
|
/* IOEXP_IRQ# */
|
|
IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
|
|
/* DIOI2C_DIS# */
|
|
IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
|
|
/* UART_RS485 */
|
|
IOMUX_PADS(PAD_DISP0_DAT2__GPIO4_IO23 | DIO_PAD_CFG),
|
|
/* UART_HALF */
|
|
IOMUX_PADS(PAD_DISP0_DAT3__GPIO4_IO24 | DIO_PAD_CFG),
|
|
/* SKT1_WDIS# */
|
|
IOMUX_PADS(PAD_DISP0_DAT17__GPIO5_IO11 | DIO_PAD_CFG),
|
|
/* SKT1_RST# */
|
|
IOMUX_PADS(PAD_DISP0_DAT18__GPIO5_IO12 | DIO_PAD_CFG),
|
|
/* SKT2_WDIS# */
|
|
IOMUX_PADS(PAD_DISP0_DAT19__GPIO5_IO13 | DIO_PAD_CFG),
|
|
/* SKT2_RST# */
|
|
IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
|
|
/* M2_OFF# */
|
|
IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | DIO_PAD_CFG),
|
|
/* M2_WDIS# */
|
|
IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | DIO_PAD_CFG),
|
|
/* M2_RST# */
|
|
IOMUX_PADS(PAD_SD2_DAT2__GPIO1_IO13 | DIO_PAD_CFG),
|
|
/* RS232_EN# */
|
|
IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const gw5905_gpio_pads[] = {
|
|
/* EMMY_PDN# */
|
|
IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03 | DIO_PAD_CFG),
|
|
/* MX6_LOCLED# */
|
|
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
|
|
/* MIPI_RST */
|
|
IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | DIO_PAD_CFG),
|
|
/* MIPI_PWDN */
|
|
IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | DIO_PAD_CFG),
|
|
/* USBEHCI_SEL */
|
|
IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
|
|
/* PCI_RST# */
|
|
IOMUX_PADS(PAD_GPIO_16__GPIO7_IO11 | DIO_PAD_CFG),
|
|
/* LVDS_BKLEN # */
|
|
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
|
|
/* PCIESKT_WDIS# */
|
|
IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13 | DIO_PAD_CFG),
|
|
/* SPK_SHDN# */
|
|
IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
|
|
/* LOCLED# */
|
|
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
|
|
/* FLASH LED1 */
|
|
IOMUX_PADS(PAD_DISP0_DAT11__GPIO5_IO05 | DIO_PAD_CFG),
|
|
/* FLASH LED2 */
|
|
IOMUX_PADS(PAD_DISP0_DAT12__GPIO5_IO06 | DIO_PAD_CFG),
|
|
/* DECT_RST# */
|
|
IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14 | DIO_PAD_CFG),
|
|
/* USBH1_PEN (EHCI) */
|
|
IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
|
|
/* LVDS_PWM */
|
|
IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
|
|
/* CODEC_RST */
|
|
IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG),
|
|
/* GYRO_CONTROL/DATA_EN */
|
|
IOMUX_PADS(PAD_CSI0_DAT8__GPIO5_IO26 | DIO_PAD_CFG),
|
|
/* TOUCH_RST */
|
|
IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG),
|
|
/* TOUCH_IRQ */
|
|
IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
|
|
};
|
|
|
|
/* Digital I/O */
|
|
struct dio_cfg gw51xx_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
|
|
IMX_GPIO_NR(1, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
|
|
IMX_GPIO_NR(1, 17),
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18) },
|
|
IMX_GPIO_NR(1, 18),
|
|
{ IOMUX_PADS(PAD_SD1_CMD__PWM4_OUT) },
|
|
4
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw52xx_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
|
|
IMX_GPIO_NR(1, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
|
|
IMX_GPIO_NR(1, 17),
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
|
|
IMX_GPIO_NR(1, 20),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw53xx_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
|
|
IMX_GPIO_NR(1, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
|
|
IMX_GPIO_NR(1, 17),
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
|
|
IMX_GPIO_NR(1, 20),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw54xx_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09) },
|
|
IMX_GPIO_NR(1, 9),
|
|
{ IOMUX_PADS(PAD_GPIO_9__PWM1_OUT) },
|
|
1
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD4_DAT1__GPIO2_IO09) },
|
|
IMX_GPIO_NR(2, 9),
|
|
{ IOMUX_PADS(PAD_SD4_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD4_DAT2__GPIO2_IO10) },
|
|
IMX_GPIO_NR(2, 10),
|
|
{ IOMUX_PADS(PAD_SD4_DAT2__PWM4_OUT) },
|
|
4
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw551x_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
|
|
IMX_GPIO_NR(1, 17),
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw552x_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
|
|
IMX_GPIO_NR(1, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
|
|
IMX_GPIO_NR(1, 17),
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
|
|
IMX_GPIO_NR(1, 20),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18) },
|
|
IMX_GPIO_NR(5, 18),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20) },
|
|
IMX_GPIO_NR(5, 20),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21) },
|
|
IMX_GPIO_NR(5, 21),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_CSI0_DAT4__GPIO5_IO22) },
|
|
IMX_GPIO_NR(5, 22),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_CSI0_DAT5__GPIO5_IO23) },
|
|
IMX_GPIO_NR(5, 23),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_CSI0_DAT7__GPIO5_IO25) },
|
|
IMX_GPIO_NR(5, 25),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw553x_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
|
|
IMX_GPIO_NR(1, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
|
|
IMX_GPIO_NR(1, 17),
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18) },
|
|
IMX_GPIO_NR(1, 18),
|
|
{ IOMUX_PADS(PAD_SD1_CMD__PWM4_OUT) },
|
|
4
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw560x_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
|
|
IMX_GPIO_NR(1, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
|
|
IMX_GPIO_NR(1, 17),
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
|
|
IMX_GPIO_NR(1, 20),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw5901_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14) },
|
|
IMX_GPIO_NR(5, 14),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_DISP0_DAT21__GPIO5_IO15) },
|
|
IMX_GPIO_NR(5, 15),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_DISP0_DAT22__GPIO5_IO16) },
|
|
IMX_GPIO_NR(5, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17) },
|
|
IMX_GPIO_NR(5, 17),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw5902_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14) },
|
|
IMX_GPIO_NR(5, 14),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_DISP0_DAT21__GPIO5_IO15) },
|
|
IMX_GPIO_NR(5, 15),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_DISP0_DAT22__GPIO5_IO16) },
|
|
IMX_GPIO_NR(5, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17) },
|
|
IMX_GPIO_NR(5, 17),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw5903_dio[] = {
|
|
};
|
|
|
|
struct dio_cfg gw5904_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
|
|
IMX_GPIO_NR(1, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
|
|
IMX_GPIO_NR(1, 17),
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
|
|
IMX_GPIO_NR(1, 20),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00) },
|
|
IMX_GPIO_NR(2, 0),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_NANDF_D1__GPIO2_IO01) },
|
|
IMX_GPIO_NR(2, 1),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02) },
|
|
IMX_GPIO_NR(2, 2),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03) },
|
|
IMX_GPIO_NR(2, 3),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04) },
|
|
IMX_GPIO_NR(2, 4),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_NANDF_D5__GPIO2_IO05) },
|
|
IMX_GPIO_NR(2, 5),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_NANDF_D6__GPIO2_IO06) },
|
|
IMX_GPIO_NR(2, 6),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_NANDF_D7__GPIO2_IO07) },
|
|
IMX_GPIO_NR(2, 7),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
};
|
|
|
|
struct dio_cfg gw5906_dio[] = {
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
|
|
IMX_GPIO_NR(1, 16),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
|
|
IMX_GPIO_NR(1, 19),
|
|
{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
|
|
2
|
|
},
|
|
{
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
|
|
IMX_GPIO_NR(1, 17),
|
|
{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
|
|
3
|
|
},
|
|
{
|
|
{IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
|
|
IMX_GPIO_NR(1, 20),
|
|
{ 0, 0 },
|
|
0
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Board Specific GPIO
|
|
*/
|
|
struct ventana gpio_cfg[GW_UNKNOWN] = {
|
|
/* GW5400proto */
|
|
{
|
|
.gpio_pads = gw54xx_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw54xx_gpio_pads)/2,
|
|
.dio_cfg = gw54xx_dio,
|
|
.dio_num = ARRAY_SIZE(gw54xx_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 10),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 29),
|
|
.mezz_pwren = IMX_GPIO_NR(4, 7),
|
|
.mezz_irq = IMX_GPIO_NR(4, 9),
|
|
.rs485en = IMX_GPIO_NR(3, 24),
|
|
.dioi2c_en = IMX_GPIO_NR(4, 5),
|
|
.pcie_sson = IMX_GPIO_NR(1, 20),
|
|
.otgpwr_en = IMX_GPIO_NR(3, 22),
|
|
.mmc_cd = IMX_GPIO_NR(7, 0),
|
|
},
|
|
|
|
/* GW51xx */
|
|
{
|
|
.gpio_pads = gw51xx_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw51xx_gpio_pads)/2,
|
|
.dio_cfg = gw51xx_dio,
|
|
.dio_num = ARRAY_SIZE(gw51xx_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 10),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 0),
|
|
.mezz_pwren = IMX_GPIO_NR(2, 19),
|
|
.mezz_irq = IMX_GPIO_NR(2, 18),
|
|
.gps_shdn = IMX_GPIO_NR(1, 2),
|
|
.vidin_en = IMX_GPIO_NR(5, 20),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.otgpwr_en = IMX_GPIO_NR(3, 22),
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW52xx */
|
|
{
|
|
.gpio_pads = gw52xx_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw52xx_gpio_pads)/2,
|
|
.dio_cfg = gw52xx_dio,
|
|
.dio_num = ARRAY_SIZE(gw52xx_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 7),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 29),
|
|
.mezz_pwren = IMX_GPIO_NR(2, 19),
|
|
.mezz_irq = IMX_GPIO_NR(2, 18),
|
|
.gps_shdn = IMX_GPIO_NR(1, 27),
|
|
.vidin_en = IMX_GPIO_NR(3, 31),
|
|
.usb_sel = IMX_GPIO_NR(1, 2),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.msata_en = GP_MSATA_SEL,
|
|
.rs232_en = GP_RS232_EN,
|
|
.otgpwr_en = IMX_GPIO_NR(3, 22),
|
|
.vsel_pin = IMX_GPIO_NR(6, 14),
|
|
.mmc_cd = IMX_GPIO_NR(7, 0),
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW53xx */
|
|
{
|
|
.gpio_pads = gw53xx_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw53xx_gpio_pads)/2,
|
|
.dio_cfg = gw53xx_dio,
|
|
.dio_num = ARRAY_SIZE(gw53xx_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 7),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 29),
|
|
.mezz_pwren = IMX_GPIO_NR(2, 19),
|
|
.mezz_irq = IMX_GPIO_NR(2, 18),
|
|
.gps_shdn = IMX_GPIO_NR(1, 27),
|
|
.vidin_en = IMX_GPIO_NR(3, 31),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.msata_en = GP_MSATA_SEL,
|
|
.rs232_en = GP_RS232_EN,
|
|
.otgpwr_en = IMX_GPIO_NR(3, 22),
|
|
.vsel_pin = IMX_GPIO_NR(6, 14),
|
|
.mmc_cd = IMX_GPIO_NR(7, 0),
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW54xx */
|
|
{
|
|
.gpio_pads = gw54xx_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw54xx_gpio_pads)/2,
|
|
.dio_cfg = gw54xx_dio,
|
|
.dio_num = ARRAY_SIZE(gw54xx_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 7),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 29),
|
|
.mezz_pwren = IMX_GPIO_NR(2, 19),
|
|
.mezz_irq = IMX_GPIO_NR(2, 18),
|
|
.rs485en = IMX_GPIO_NR(7, 1),
|
|
.vidin_en = IMX_GPIO_NR(3, 31),
|
|
.dioi2c_en = IMX_GPIO_NR(4, 5),
|
|
.pcie_sson = IMX_GPIO_NR(1, 20),
|
|
.wdis = IMX_GPIO_NR(5, 17),
|
|
.msata_en = GP_MSATA_SEL,
|
|
.rs232_en = GP_RS232_EN,
|
|
.otgpwr_en = IMX_GPIO_NR(3, 22),
|
|
.vsel_pin = IMX_GPIO_NR(6, 14),
|
|
.mmc_cd = IMX_GPIO_NR(7, 0),
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW551x */
|
|
{
|
|
.gpio_pads = gw551x_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw551x_gpio_pads)/2,
|
|
.dio_cfg = gw551x_dio,
|
|
.dio_num = ARRAY_SIZE(gw551x_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 7),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 0),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW552x */
|
|
{
|
|
.gpio_pads = gw552x_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw552x_gpio_pads)/2,
|
|
.dio_cfg = gw552x_dio,
|
|
.dio_num = ARRAY_SIZE(gw552x_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 7),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 29),
|
|
.usb_sel = IMX_GPIO_NR(1, 7),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.msata_en = GP_MSATA_SEL,
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW553x */
|
|
{
|
|
.gpio_pads = gw553x_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw553x_gpio_pads)/2,
|
|
.dio_cfg = gw553x_dio,
|
|
.dio_num = ARRAY_SIZE(gw553x_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 10),
|
|
IMX_GPIO_NR(4, 11),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 0),
|
|
.vidin_en = IMX_GPIO_NR(5, 20),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.otgpwr_en = IMX_GPIO_NR(3, 22),
|
|
.vsel_pin = IMX_GPIO_NR(6, 14),
|
|
.mmc_cd = IMX_GPIO_NR(7, 0),
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW560x */
|
|
{
|
|
.gpio_pads = gw560x_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw560x_gpio_pads)/2,
|
|
.dio_cfg = gw560x_dio,
|
|
.dio_num = ARRAY_SIZE(gw560x_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 7),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(4, 31),
|
|
.mezz_pwren = IMX_GPIO_NR(2, 19),
|
|
.mezz_irq = IMX_GPIO_NR(2, 18),
|
|
.rs232_en = GP_RS232_EN,
|
|
.vidin_en = IMX_GPIO_NR(3, 31),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.otgpwr_en = IMX_GPIO_NR(4, 15),
|
|
.mmc_cd = IMX_GPIO_NR(7, 0),
|
|
},
|
|
|
|
/* GW5901 */
|
|
{
|
|
.gpio_pads = gw5901_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw5901_gpio_pads)/2,
|
|
.dio_cfg = gw5901_dio,
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 29),
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW5902 */
|
|
{
|
|
.gpio_pads = gw5902_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw5902_gpio_pads)/2,
|
|
.dio_cfg = gw5902_dio,
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 0),
|
|
.rs232_en = GP_RS232_EN,
|
|
.otgpwr_en = IMX_GPIO_NR(3, 23),
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW5903 */
|
|
{
|
|
.gpio_pads = gw5903_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw5903_gpio_pads)/2,
|
|
.dio_cfg = gw5903_dio,
|
|
.dio_num = ARRAY_SIZE(gw5903_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(6, 14),
|
|
},
|
|
.otgpwr_en = IMX_GPIO_NR(4, 15),
|
|
.mmc_cd = IMX_GPIO_NR(6, 11),
|
|
},
|
|
|
|
/* GW5904 */
|
|
{
|
|
.gpio_pads = gw5904_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw5904_gpio_pads)/2,
|
|
.dio_cfg = gw5904_dio,
|
|
.dio_num = ARRAY_SIZE(gw5904_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 7),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 0),
|
|
.mezz_pwren = IMX_GPIO_NR(2, 19),
|
|
.mezz_irq = IMX_GPIO_NR(2, 18),
|
|
.otgpwr_en = IMX_GPIO_NR(3, 22),
|
|
},
|
|
|
|
/* GW5905 */
|
|
{
|
|
.gpio_pads = gw5905_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw5905_gpio_pads)/2,
|
|
.leds = {
|
|
IMX_GPIO_NR(6, 14),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(7, 11),
|
|
.wdis = IMX_GPIO_NR(7, 13),
|
|
},
|
|
|
|
/* GW5906 */
|
|
{
|
|
.gpio_pads = gw552x_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw552x_gpio_pads)/2,
|
|
.dio_cfg = gw5906_dio,
|
|
.dio_num = ARRAY_SIZE(gw5906_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 7),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 29),
|
|
.usb_sel = IMX_GPIO_NR(1, 7),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.msata_en = GP_MSATA_SEL,
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW5907 */
|
|
{
|
|
.gpio_pads = gw51xx_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw51xx_gpio_pads)/2,
|
|
.dio_cfg = gw51xx_dio,
|
|
.dio_num = ARRAY_SIZE(gw51xx_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 10),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 0),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.nand = true,
|
|
},
|
|
|
|
/* GW5908 */
|
|
{
|
|
.gpio_pads = gw53xx_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw53xx_gpio_pads)/2,
|
|
.dio_cfg = gw53xx_dio,
|
|
.dio_num = ARRAY_SIZE(gw53xx_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 7),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 29),
|
|
.mezz_pwren = IMX_GPIO_NR(2, 19),
|
|
.mezz_irq = IMX_GPIO_NR(2, 18),
|
|
.gps_shdn = IMX_GPIO_NR(1, 27),
|
|
.vidin_en = IMX_GPIO_NR(3, 31),
|
|
.wdis = IMX_GPIO_NR(7, 12),
|
|
.msata_en = GP_MSATA_SEL,
|
|
.rs232_en = GP_RS232_EN,
|
|
},
|
|
|
|
/* GW5909 */
|
|
{
|
|
.gpio_pads = gw5904_gpio_pads,
|
|
.num_pads = ARRAY_SIZE(gw5904_gpio_pads)/2,
|
|
.dio_cfg = gw5904_dio,
|
|
.dio_num = ARRAY_SIZE(gw5904_dio),
|
|
.leds = {
|
|
IMX_GPIO_NR(4, 6),
|
|
IMX_GPIO_NR(4, 7),
|
|
IMX_GPIO_NR(4, 15),
|
|
},
|
|
.pcie_rst = IMX_GPIO_NR(1, 0),
|
|
.mezz_pwren = IMX_GPIO_NR(2, 19),
|
|
.mezz_irq = IMX_GPIO_NR(2, 18),
|
|
.otgpwr_en = IMX_GPIO_NR(3, 22),
|
|
},
|
|
};
|
|
|
|
#define SETUP_GPIO_OUTPUT(gpio, name, level) \
|
|
gpio_request(gpio, name); \
|
|
gpio_direction_output(gpio, level);
|
|
#define SETUP_GPIO_INPUT(gpio, name) \
|
|
gpio_request(gpio, name); \
|
|
gpio_direction_input(gpio);
|
|
void setup_iomux_gpio(int board, struct ventana_board_info *info)
|
|
{
|
|
int i;
|
|
|
|
if (board >= GW_UNKNOWN)
|
|
return;
|
|
|
|
/* board specific iomux */
|
|
imx_iomux_v3_setup_multiple_pads(gpio_cfg[board].gpio_pads,
|
|
gpio_cfg[board].num_pads);
|
|
|
|
/* RS232_EN# */
|
|
if (gpio_cfg[board].rs232_en) {
|
|
gpio_request(gpio_cfg[board].rs232_en, "rs232_en#");
|
|
gpio_direction_output(gpio_cfg[board].rs232_en, 0);
|
|
}
|
|
|
|
/* GW522x Uses GPIO3_IO23 for PCIE_RST# */
|
|
if (board == GW52xx && info->model[4] == '2')
|
|
gpio_cfg[board].pcie_rst = IMX_GPIO_NR(3, 23);
|
|
|
|
/* assert PCI_RST# */
|
|
gpio_request(gpio_cfg[board].pcie_rst, "pci_rst#");
|
|
gpio_direction_output(gpio_cfg[board].pcie_rst, 0);
|
|
|
|
/* turn off (active-high) user LED's */
|
|
for (i = 0; i < ARRAY_SIZE(gpio_cfg[board].leds); i++) {
|
|
char name[16];
|
|
if (gpio_cfg[board].leds[i]) {
|
|
sprintf(name, "led_user%d", i);
|
|
gpio_request(gpio_cfg[board].leds[i], name);
|
|
gpio_direction_output(gpio_cfg[board].leds[i], 1);
|
|
}
|
|
}
|
|
|
|
/* MSATA Enable - default to PCI */
|
|
if (gpio_cfg[board].msata_en) {
|
|
gpio_request(gpio_cfg[board].msata_en, "msata_en");
|
|
gpio_direction_output(gpio_cfg[board].msata_en, 0);
|
|
}
|
|
|
|
/* Expansion Mezzanine IO */
|
|
if (gpio_cfg[board].mezz_pwren) {
|
|
gpio_request(gpio_cfg[board].mezz_pwren, "mezz_pwr");
|
|
gpio_direction_output(gpio_cfg[board].mezz_pwren, 0);
|
|
}
|
|
if (gpio_cfg[board].mezz_irq) {
|
|
gpio_request(gpio_cfg[board].mezz_irq, "mezz_irq#");
|
|
gpio_direction_input(gpio_cfg[board].mezz_irq);
|
|
}
|
|
|
|
/* RS485 Transmit Enable */
|
|
if (gpio_cfg[board].rs485en) {
|
|
gpio_request(gpio_cfg[board].rs485en, "rs485_en");
|
|
gpio_direction_output(gpio_cfg[board].rs485en, 0);
|
|
}
|
|
|
|
/* GPS_SHDN */
|
|
if (gpio_cfg[board].gps_shdn) {
|
|
gpio_request(gpio_cfg[board].gps_shdn, "gps_shdn");
|
|
gpio_direction_output(gpio_cfg[board].gps_shdn, 1);
|
|
}
|
|
|
|
/* Analog video codec power enable */
|
|
if (gpio_cfg[board].vidin_en) {
|
|
gpio_request(gpio_cfg[board].vidin_en, "anavidin_en");
|
|
gpio_direction_output(gpio_cfg[board].vidin_en, 1);
|
|
}
|
|
|
|
/* DIOI2C_DIS# */
|
|
if (gpio_cfg[board].dioi2c_en) {
|
|
gpio_request(gpio_cfg[board].dioi2c_en, "dioi2c_dis#");
|
|
gpio_direction_output(gpio_cfg[board].dioi2c_en, 0);
|
|
}
|
|
|
|
/* PCICK_SSON: disable spread-spectrum clock */
|
|
if (gpio_cfg[board].pcie_sson) {
|
|
gpio_request(gpio_cfg[board].pcie_sson, "pci_sson");
|
|
gpio_direction_output(gpio_cfg[board].pcie_sson, 0);
|
|
}
|
|
|
|
/* USBOTG mux routing */
|
|
if (gpio_cfg[board].usb_sel) {
|
|
gpio_request(gpio_cfg[board].usb_sel, "usb_pcisel");
|
|
gpio_direction_output(gpio_cfg[board].usb_sel, 0);
|
|
}
|
|
|
|
/* PCISKT_WDIS# (Wireless disable GPIO to miniPCIe sockets) */
|
|
if (gpio_cfg[board].wdis) {
|
|
gpio_request(gpio_cfg[board].wdis, "wlan_dis");
|
|
gpio_direction_output(gpio_cfg[board].wdis, 1);
|
|
}
|
|
|
|
/* OTG power off */
|
|
if (gpio_cfg[board].otgpwr_en) {
|
|
gpio_request(gpio_cfg[board].otgpwr_en, "usbotg_pwr");
|
|
gpio_direction_output(gpio_cfg[board].otgpwr_en, 0);
|
|
}
|
|
|
|
/* sense vselect pin to see if we support uhs-i */
|
|
if (gpio_cfg[board].vsel_pin) {
|
|
gpio_request(gpio_cfg[board].vsel_pin, "sd3_vselect");
|
|
gpio_direction_input(gpio_cfg[board].vsel_pin);
|
|
gpio_cfg[board].usd_vsel = !gpio_get_value(gpio_cfg[board].vsel_pin);
|
|
}
|
|
|
|
/* microSD CD */
|
|
if (gpio_cfg[board].mmc_cd) {
|
|
gpio_request(gpio_cfg[board].mmc_cd, "sd_cd");
|
|
gpio_direction_input(gpio_cfg[board].mmc_cd);
|
|
}
|
|
|
|
/* Anything else board specific */
|
|
switch(board) {
|
|
case GW560x:
|
|
gpio_request(IMX_GPIO_NR(4, 26), "12p0_en");
|
|
gpio_direction_output(IMX_GPIO_NR(4, 26), 1);
|
|
break;
|
|
case GW5901:
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 2), "can_stby", 0);
|
|
break;
|
|
case GW5902:
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 2), "can1_stby", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(7, 3), "can2_stby", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(7, 12), "5P0V_EN", 1);
|
|
break;
|
|
case GW5903:
|
|
gpio_request(IMX_GPIO_NR(3, 31) , "usbh1-ehci_pwr");
|
|
gpio_direction_output(IMX_GPIO_NR(3, 31), 1);
|
|
gpio_request(IMX_GPIO_NR(4, 15) , "usbh2-otg_pwr");
|
|
gpio_direction_output(IMX_GPIO_NR(4, 15), 1);
|
|
gpio_request(IMX_GPIO_NR(4, 7) , "usbdpc_pwr");
|
|
gpio_direction_output(IMX_GPIO_NR(4, 15), 1);
|
|
gpio_request(IMX_GPIO_NR(1, 25) , "rgmii_en");
|
|
gpio_direction_output(IMX_GPIO_NR(1, 25), 1);
|
|
gpio_request(IMX_GPIO_NR(4, 6) , "touch_irq#");
|
|
gpio_direction_input(IMX_GPIO_NR(4, 6));
|
|
gpio_request(IMX_GPIO_NR(4, 8) , "touch_rst");
|
|
gpio_direction_output(IMX_GPIO_NR(4, 8), 1);
|
|
gpio_request(IMX_GPIO_NR(1, 7) , "bklt_12ven");
|
|
gpio_direction_output(IMX_GPIO_NR(1, 7), 1);
|
|
break;
|
|
case GW5909:
|
|
case GW5904:
|
|
gpio_request(IMX_GPIO_NR(4, 23), "rs485_en");
|
|
gpio_direction_output(IMX_GPIO_NR(4, 23), 0);
|
|
gpio_request(IMX_GPIO_NR(5, 11), "skt1_wdis#");
|
|
gpio_direction_output(IMX_GPIO_NR(5, 11), 1);
|
|
gpio_request(IMX_GPIO_NR(5, 12), "skt1_rst#");
|
|
gpio_direction_output(IMX_GPIO_NR(5, 12), 1);
|
|
gpio_request(IMX_GPIO_NR(5, 13), "skt2_wdis#");
|
|
gpio_direction_output(IMX_GPIO_NR(5, 13), 1);
|
|
gpio_request(IMX_GPIO_NR(1, 15), "m2_off#");
|
|
gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
|
|
gpio_request(IMX_GPIO_NR(1, 14), "m2_wdis#");
|
|
gpio_direction_output(IMX_GPIO_NR(1, 14), 1);
|
|
gpio_request(IMX_GPIO_NR(1, 13), "m2_rst#");
|
|
gpio_direction_output(IMX_GPIO_NR(1, 13), 1);
|
|
break;
|
|
case GW5905:
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 7), "usb_pcisel", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 9), "lvds_cabc", 1);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 14), "mipi_pdwn", 1);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 15), "mipi_rst#", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(2, 3), "emmy_pdwn#", 1);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(4, 5), "spk_shdn#", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(4, 8), "touch_rst", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(4, 6), "touch_irq", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 5), "flash_en1", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 6), "flash_en2", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 14), "dect_rst#", 1);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 17), "codec_rst#", 0);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 26), "imu_den", 1);
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(7, 12), "lvds_cabc", 0);
|
|
mdelay(100);
|
|
/*
|
|
* gauruntee touch controller comes out of reset with INT
|
|
* low for address
|
|
*/
|
|
SETUP_GPIO_OUTPUT(IMX_GPIO_NR(4, 8), "touch_rst", 1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* setup GPIO pinmux and default configuration per baseboard and env */
|
|
void setup_board_gpio(int board, struct ventana_board_info *info)
|
|
{
|
|
const char *s;
|
|
char arg[10];
|
|
size_t len;
|
|
int i;
|
|
int quiet = simple_strtol(env_get("quiet"), NULL, 10);
|
|
|
|
if (board >= GW_UNKNOWN)
|
|
return;
|
|
|
|
/* RS232_EN# */
|
|
if (gpio_cfg[board].rs232_en) {
|
|
gpio_direction_output(gpio_cfg[board].rs232_en,
|
|
(hwconfig("rs232")) ? 0 : 1);
|
|
}
|
|
|
|
/* MSATA Enable */
|
|
if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) {
|
|
gpio_direction_output(GP_MSATA_SEL,
|
|
(hwconfig("msata")) ? 1 : 0);
|
|
}
|
|
|
|
/* USBOTG Select (PCISKT or FrontPanel) */
|
|
if (gpio_cfg[board].usb_sel) {
|
|
gpio_direction_output(gpio_cfg[board].usb_sel,
|
|
(hwconfig("usb_pcisel")) ? 1 : 0);
|
|
}
|
|
|
|
/*
|
|
* Configure DIO pinmux/padctl registers
|
|
* see IMX6DQRM/IMX6SDLRM IOMUXC_SW_PAD_CTL_PAD_* register definitions
|
|
*/
|
|
for (i = 0; i < gpio_cfg[board].dio_num; i++) {
|
|
struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i];
|
|
iomux_v3_cfg_t ctrl = DIO_PAD_CFG;
|
|
unsigned cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1;
|
|
|
|
if (!cfg->gpio_padmux[0] && !cfg->gpio_padmux[1])
|
|
continue;
|
|
sprintf(arg, "dio%d", i);
|
|
if (!hwconfig(arg))
|
|
continue;
|
|
s = hwconfig_subarg(arg, "padctrl", &len);
|
|
if (s) {
|
|
ctrl = MUX_PAD_CTRL(simple_strtoul(s, NULL, 16)
|
|
& 0x1ffff) | MUX_MODE_SION;
|
|
}
|
|
if (hwconfig_subarg_cmp(arg, "mode", "gpio")) {
|
|
if (!quiet) {
|
|
printf("DIO%d: GPIO%d_IO%02d (gpio-%d)\n", i,
|
|
(cfg->gpio_param/32)+1,
|
|
cfg->gpio_param%32,
|
|
cfg->gpio_param);
|
|
}
|
|
imx_iomux_v3_setup_pad(cfg->gpio_padmux[cputype] |
|
|
ctrl);
|
|
gpio_requestf(cfg->gpio_param, "dio%d", i);
|
|
gpio_direction_input(cfg->gpio_param);
|
|
} else if (hwconfig_subarg_cmp(arg, "mode", "pwm") &&
|
|
cfg->pwm_padmux) {
|
|
if (!cfg->pwm_param) {
|
|
printf("DIO%d: Error: pwm config invalid\n",
|
|
i);
|
|
continue;
|
|
}
|
|
if (!quiet)
|
|
printf("DIO%d: pwm%d\n", i, cfg->pwm_param);
|
|
imx_iomux_v3_setup_pad(cfg->pwm_padmux[cputype] |
|
|
MUX_PAD_CTRL(ctrl));
|
|
}
|
|
}
|
|
|
|
if (!quiet) {
|
|
if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) {
|
|
printf("MSATA: %s\n", (hwconfig("msata") ?
|
|
"enabled" : "disabled"));
|
|
}
|
|
if (gpio_cfg[board].rs232_en) {
|
|
printf("RS232: %s\n", (hwconfig("rs232")) ?
|
|
"enabled" : "disabled");
|
|
}
|
|
}
|
|
}
|
|
|
|
/* setup board specific PMIC */
|
|
void setup_pmic(void)
|
|
{
|
|
struct pmic *p;
|
|
struct ventana_board_info ventana_info;
|
|
int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
|
|
const int i2c_pmic = 1;
|
|
u32 reg;
|
|
|
|
i2c_set_bus_num(i2c_pmic);
|
|
|
|
/* configure PFUZE100 PMIC */
|
|
if (!i2c_probe(CONFIG_POWER_PFUZE100_I2C_ADDR)) {
|
|
debug("probed PFUZE100@0x%x\n", CONFIG_POWER_PFUZE100_I2C_ADDR);
|
|
power_pfuze100_init(i2c_pmic);
|
|
p = pmic_get("PFUZE100");
|
|
if (p && !pmic_probe(p)) {
|
|
pmic_reg_read(p, PFUZE100_DEVICEID, ®);
|
|
printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
|
|
|
|
/* Set VGEN1 to 1.5V and enable */
|
|
pmic_reg_read(p, PFUZE100_VGEN1VOL, ®);
|
|
reg &= ~(LDO_VOL_MASK);
|
|
reg |= (LDOA_1_50V | LDO_EN);
|
|
pmic_reg_write(p, PFUZE100_VGEN1VOL, reg);
|
|
|
|
/* Set SWBST to 5.0V and enable */
|
|
pmic_reg_read(p, PFUZE100_SWBSTCON1, ®);
|
|
reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
|
|
reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
|
|
pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
|
|
}
|
|
}
|
|
|
|
/* configure LTC3676 PMIC */
|
|
else if (!i2c_probe(CONFIG_POWER_LTC3676_I2C_ADDR)) {
|
|
debug("probed LTC3676@0x%x\n", CONFIG_POWER_LTC3676_I2C_ADDR);
|
|
power_ltc3676_init(i2c_pmic);
|
|
p = pmic_get("LTC3676_PMIC");
|
|
if (!p || pmic_probe(p))
|
|
return;
|
|
puts("PMIC: LTC3676\n");
|
|
/*
|
|
* set board-specific scalar for max CPU frequency
|
|
* per CPU based on the LDO enabled Operating Ranges
|
|
* defined in the respective IMX6DQ and IMX6SDL
|
|
* datasheets. The voltage resulting from the R1/R2
|
|
* feedback inputs on Ventana is 1308mV. Note that this
|
|
* is a bit shy of the Vmin of 1350mV in the datasheet
|
|
* for LDO enabled mode but is as high as we can go.
|
|
*/
|
|
switch (board) {
|
|
case GW560x:
|
|
/* mask PGOOD during SW3 transition */
|
|
pmic_reg_write(p, LTC3676_DVB3B,
|
|
0x1f | LTC3676_PGOOD_MASK);
|
|
/* set SW3 (VDD_ARM) */
|
|
pmic_reg_write(p, LTC3676_DVB3A, 0x1f);
|
|
break;
|
|
case GW5903:
|
|
/* mask PGOOD during SW3 transition */
|
|
pmic_reg_write(p, LTC3676_DVB3B,
|
|
0x1f | LTC3676_PGOOD_MASK);
|
|
/* set SW3 (VDD_ARM) */
|
|
pmic_reg_write(p, LTC3676_DVB3A, 0x1f);
|
|
|
|
/* mask PGOOD during SW4 transition */
|
|
pmic_reg_write(p, LTC3676_DVB4B,
|
|
0x1f | LTC3676_PGOOD_MASK);
|
|
/* set SW4 (VDD_SOC) */
|
|
pmic_reg_write(p, LTC3676_DVB4A, 0x1f);
|
|
break;
|
|
case GW5905:
|
|
/* mask PGOOD during SW1 transition */
|
|
pmic_reg_write(p, LTC3676_DVB1B,
|
|
0x1f | LTC3676_PGOOD_MASK);
|
|
/* set SW1 (VDD_ARM) */
|
|
pmic_reg_write(p, LTC3676_DVB1A, 0x1f);
|
|
|
|
/* mask PGOOD during SW3 transition */
|
|
pmic_reg_write(p, LTC3676_DVB3B,
|
|
0x1f | LTC3676_PGOOD_MASK);
|
|
/* set SW3 (VDD_SOC) */
|
|
pmic_reg_write(p, LTC3676_DVB3A, 0x1f);
|
|
break;
|
|
default:
|
|
/* mask PGOOD during SW1 transition */
|
|
pmic_reg_write(p, LTC3676_DVB1B,
|
|
0x1f | LTC3676_PGOOD_MASK);
|
|
/* set SW1 (VDD_SOC) */
|
|
pmic_reg_write(p, LTC3676_DVB1A, 0x1f);
|
|
|
|
/* mask PGOOD during SW3 transition */
|
|
pmic_reg_write(p, LTC3676_DVB3B,
|
|
0x1f | LTC3676_PGOOD_MASK);
|
|
/* set SW3 (VDD_ARM) */
|
|
pmic_reg_write(p, LTC3676_DVB3A, 0x1f);
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC_IMX
|
|
static struct fsl_esdhc_cfg usdhc_cfg[2];
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
struct ventana_board_info ventana_info;
|
|
int board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
|
|
int ret;
|
|
|
|
switch (board_type) {
|
|
case GW52xx:
|
|
case GW53xx:
|
|
case GW54xx:
|
|
case GW553x:
|
|
/* usdhc3: 4bit microSD */
|
|
SETUP_IOMUX_PADS(usdhc3_pads);
|
|
usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
usdhc_cfg[0].max_bus_width = 4;
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
|
case GW560x:
|
|
/* usdhc2: 8-bit eMMC */
|
|
SETUP_IOMUX_PADS(gw560x_emmc_sd2_pads);
|
|
usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
|
|
usdhc_cfg[0].max_bus_width = 8;
|
|
ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
|
if (ret)
|
|
return ret;
|
|
/* usdhc3: 4-bit microSD */
|
|
SETUP_IOMUX_PADS(usdhc3_pads);
|
|
usdhc_cfg[1].esdhc_base = USDHC3_BASE_ADDR;
|
|
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
usdhc_cfg[1].max_bus_width = 4;
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
|
|
case GW5903:
|
|
/* usdhc3: 8-bit eMMC */
|
|
SETUP_IOMUX_PADS(gw5904_emmc_pads);
|
|
usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
usdhc_cfg[0].max_bus_width = 8;
|
|
ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
|
if (ret)
|
|
return ret;
|
|
/* usdhc2: 4-bit microSD */
|
|
SETUP_IOMUX_PADS(gw5904_mmc_pads);
|
|
usdhc_cfg[1].esdhc_base = USDHC2_BASE_ADDR;
|
|
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
|
|
usdhc_cfg[1].max_bus_width = 4;
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
|
|
case GW5904:
|
|
case GW5905:
|
|
case GW5909:
|
|
/* usdhc3: 8bit eMMC */
|
|
SETUP_IOMUX_PADS(gw5904_emmc_pads);
|
|
usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
usdhc_cfg[0].max_bus_width = 8;
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
|
default:
|
|
/* doesn't have MMC */
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct ventana_board_info ventana_info;
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
|
|
int gpio = gpio_cfg[board].mmc_cd;
|
|
|
|
/* Card Detect */
|
|
switch (board) {
|
|
case GW560x:
|
|
/* emmc is always present */
|
|
if (cfg->esdhc_base == USDHC2_BASE_ADDR)
|
|
return 1;
|
|
break;
|
|
case GW5903:
|
|
case GW5904:
|
|
case GW5905:
|
|
case GW5909:
|
|
/* emmc is always present */
|
|
if (cfg->esdhc_base == USDHC3_BASE_ADDR)
|
|
return 1;
|
|
break;
|
|
}
|
|
|
|
if (gpio) {
|
|
debug("%s: gpio%d=%d\n", __func__, gpio, gpio_get_value(gpio));
|
|
return !gpio_get_value(gpio);
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
#endif /* CONFIG_FSL_ESDHC_IMX */
|