u-boot/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi
Tim Harvey bb6a4c5536 arm: dts: imx8mm: move firmware/optee node to common imx8mm-u-boot.dtsi
Move the firmware/optee node to the common imx8mm-u-boot.dtsi and
protect it with an ifdef CONFIG_OPTEE as it is a meaningless node
without the optee driver enabled.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-10-16 08:46:01 +02:00

117 lines
1.3 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 NXP
*/
#include "imx8mm-u-boot.dtsi"
/ {
wdt-reboot {
compatible = "wdt-reboot";
bootph-pre-ram;
wdt = <&wdog1>;
};
};
&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} {
bootph-pre-ram;
};
&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} {
bootph-pre-ram;
};
&binman_fip {
arch = "arm64";
compression = "none";
description = "Trusted Firmware FIP";
load = <0x40310000>;
type = "firmware";
fip_blob {
filename = "fip.bin";
type = "blob-ext";
};
};
/* This cannot work since it refers to a template node
&binman_configuration {
loadables = "atf", "fip";
};
*/
&fec1 {
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
};
&gpio1 {
bootph-pre-ram;
};
&gpio2 {
bootph-pre-ram;
};
&gpio3 {
bootph-pre-ram;
};
&gpio4 {
bootph-pre-ram;
};
&gpio5 {
bootph-pre-ram;
};
&i2c1 {
bootph-pre-ram;
};
&i2c2 {
bootph-pre-ram;
};
&pinctrl_i2c2 {
bootph-pre-ram;
};
&pinctrl_pmic {
bootph-pre-ram;
};
&pinctrl_uart3 {
bootph-pre-ram;
};
&pinctrl_usdhc2 {
bootph-pre-ram;
};
&pinctrl_usdhc2_gpio {
bootph-pre-ram;
};
&pinctrl_usdhc3 {
bootph-pre-ram;
};
&uart3 {
bootph-pre-ram;
};
&usdhc1 {
bootph-pre-ram;
};
&usdhc2 {
bootph-pre-ram;
};
&usdhc3 {
bootph-pre-ram;
};
&wdog1 {
bootph-pre-ram;
};