u-boot/include/power/rk8xx_pmic.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

194 lines
3.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*/
#ifndef _PMIC_RK8XX_H_
#define _PMIC_RK8XX_H_
enum {
REG_SECONDS = 0x00,
REG_MINUTES,
REG_HOURS,
REG_DAYS,
REG_MONTHS,
REG_YEARS,
REG_WEEKS,
REG_ALARM_SECONDS,
REG_ALARM_MINUTES,
REG_ALARM_HOURS,
REG_ALARM_DAYS,
REG_ALARM_MONTHS,
REG_ALARM_YEARS,
REG_RTC_CTRL = 0x10,
REG_RTC_STATUS,
REG_RTC_INT,
REG_RTC_COMP_LSB,
REG_RTC_COMP_MSB,
ID_MSB = 0x17,
ID_LSB,
REG_CLK32OUT = 0x20,
REG_VB_MON,
REG_THERMAL,
REG_DCDC_EN,
REG_LDO_EN,
REG_SLEEP_SET_OFF1,
REG_SLEEP_SET_OFF2,
REG_DCDC_UV_STS,
REG_DCDC_UV_ACT,
REG_LDO_UV_STS,
REG_LDO_UV_ACT,
REG_DCDC_PG,
REG_LDO_PG,
REG_VOUT_MON_TDB,
REG_BUCK1_CONFIG,
REG_BUCK1_ON_VSEL,
REG_BUCK1_SLP_VSEL,
REG_BUCK1_DVS_VSEL,
REG_BUCK2_CONFIG,
REG_BUCK2_ON_VSEL,
REG_BUCK2_SLP_VSEL,
REG_BUCK2_DVS_VSEL,
REG_BUCK3_CONFIG,
REG_BUCK4_CONFIG,
REG_BUCK4_ON_VSEL,
REG_BUCK4_SLP_VSEL,
REG_BOOST_CONFIG_REG,
REG_LDO1_ON_VSEL,
REG_LDO1_SLP_VSEL,
REG_LDO2_ON_VSEL,
REG_LDO2_SLP_VSEL,
REG_LDO3_ON_VSEL,
REG_LDO3_SLP_VSEL,
REG_LDO4_ON_VSEL,
REG_LDO4_SLP_VSEL,
REG_LDO5_ON_VSEL,
REG_LDO5_SLP_VSEL,
REG_LDO6_ON_VSEL,
REG_LDO6_SLP_VSEL,
REG_LDO7_ON_VSEL,
REG_LDO7_SLP_VSEL,
REG_LDO8_ON_VSEL,
REG_LDO8_SLP_VSEL,
REG_DEVCTRL,
REG_INT_STS1,
REG_INT_STS_MSK1,
REG_INT_STS2,
REG_INT_STS_MSK2,
REG_IO_POL,
REG_OTP_VDD_EN,
REG_H5V_EN,
REG_SLEEP_SET_OFF,
REG_BOOST_LDO9_ON_VSEL,
REG_BOOST_LDO9_SLP_VSEL,
REG_BOOST_CTRL,
/* Not sure what this does */
REG_DCDC_ILMAX = 0x90,
REG_CHRG_COMP = 0x9a,
REG_SUP_STS = 0xa0,
REG_USB_CTRL,
REG1_CHRG_CTRL,
REG2_CHRG_CTRL,
REG3_CHRG_CTRL,
REG_BAT_CTRL,
REG_BAT_HTS_TS1,
REG_BAT_LTS_TS1,
REG_BAT_HTS_TS2,
REG_BAT_LTS_TS2,
REG_TS_CTRL,
REG_ADC_CTRL,
REG_ON_SOURCE,
REG_OFF_SOURCE,
REG_GGCON,
REG_GGSTS,
REG_FRAME_SMP_INTERV,
REG_AUTO_SLP_CUR_THR,
REG3_GASCNT_CAL,
REG2_GASCNT_CAL,
REG1_GASCNT_CAL,
REG0_GASCNT_CAL,
REG3_GASCNT,
REG2_GASCNT,
REG1_GASCNT,
REG0_GASCNT,
REGH_BAT_CUR_AVG,
REGL_BAT_CUR_AVG,
REGH_TS1_ADC,
REGL_TS1_ADC,
REGH_TS2_ADC,
REGL_TS2_ADC,
REGH_BAT_OCV,
REGL_BAT_OCV,
REGH_BAT_VOL,
REGL_BAT_VOL,
REGH_RELAX_ENTRY_THRES,
REGL_RELAX_ENTRY_THRES,
REGH_RELAX_EXIT_THRES,
REGL_RELAX_EXIT_THRES,
REGH_RELAX_VOL1,
REGL_RELAX_VOL1,
REGH_RELAX_VOL2,
REGL_RELAX_VOL2,
REGH_BAT_CUR_R_CALC,
REGL_BAT_CUR_R_CALC,
REGH_BAT_VOL_R_CALC,
REGL_BAT_VOL_R_CALC,
REGH_CAL_OFFSET,
REGL_CAL_OFFSET,
REG_NON_ACT_TIMER_CNT,
REGH_VCALIB0,
REGL_VCALIB0,
REGH_VCALIB1,
REGL_VCALIB1,
REGH_IOFFSET,
REGL_IOFFSET,
REG_SOC,
REG3_REMAIN_CAP,
REG2_REMAIN_CAP,
REG1_REMAIN_CAP,
REG0_REMAIN_CAP,
REG_UPDAT_LEVE,
REG3_NEW_FCC,
REG2_NEW_FCC,
REG1_NEW_FCC,
REG0_NEW_FCC,
REG_NON_ACT_TIMER_CNT_SAVE,
REG_OCV_VOL_VALID,
REG_REBOOT_CNT,
REG_POFFSET,
REG_MISC_MARK,
REG_HALT_CNT,
REGH_CALC_REST,
REGL_CALC_REST,
SAVE_DATA19,
RK808_NUM_OF_REGS,
};
enum {
RK805_ID = 0x8050,
RK808_ID = 0x0000,
RK818_ID = 0x8180,
};
#define RK8XX_ID_MSK 0xfff0
struct rk8xx_reg_table {
char *name;
u8 reg_ctl;
u8 reg_vol;
};
struct rk8xx_priv {
int variant;
};
int rk8xx_spl_configure_buck(struct udevice *pmic, int buck, int uvolt);
int rk818_spl_configure_usb_input_current(struct udevice *pmic, int current_ma);
int rk818_spl_configure_usb_chrg_shutdown(struct udevice *pmic, int uvolt);
#endif