mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 13:14:27 +00:00
26cbc0d663
Otherwise system will hang after executing wfi. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
239 lines
6.5 KiB
C
239 lines
6.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
* Author: Hongbo Zhang <hongbo.zhang@nxp.com>
|
|
* This file implements LS102X platform PSCI SYSTEM-SUSPEND function
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <asm/io.h>
|
|
#include <asm/psci.h>
|
|
#include <asm/arch/immap_ls102xa.h>
|
|
#include <fsl_immap.h>
|
|
#include "fsl_epu.h"
|
|
|
|
#define __secure __attribute__((section("._secure.text")))
|
|
|
|
#define CCSR_GICD_CTLR 0x1000
|
|
#define CCSR_GICC_CTLR 0x2000
|
|
#define DCSR_RCPM_CG1CR0 0x31c
|
|
#define DCSR_RCPM_CSTTACR0 0xb00
|
|
#define DCFG_CRSTSR_WDRFR 0x8
|
|
#define DDR_RESV_LEN 128
|
|
|
|
#ifdef CONFIG_LS1_DEEP_SLEEP
|
|
/*
|
|
* DDR controller initialization training breaks the first 128 bytes of DDR,
|
|
* save them so that the bootloader can restore them while resuming.
|
|
*/
|
|
static void __secure ls1_save_ddr_head(void)
|
|
{
|
|
const char *src = (const char *)CONFIG_SYS_SDRAM_BASE;
|
|
char *dest = (char *)(OCRAM_BASE_S_ADDR + OCRAM_S_SIZE - DDR_RESV_LEN);
|
|
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
int i;
|
|
|
|
out_le32(&scfg->sparecr[2], dest);
|
|
|
|
for (i = 0; i < DDR_RESV_LEN; i++)
|
|
*dest++ = *src++;
|
|
}
|
|
|
|
static void __secure ls1_fsm_setup(void)
|
|
{
|
|
void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
|
|
void *dcsr_rcpm_base = (void *)SYS_FSL_DCSR_RCPM_ADDR;
|
|
|
|
out_be32(dcsr_rcpm_base + DCSR_RCPM_CSTTACR0, 0x00001001);
|
|
out_be32(dcsr_rcpm_base + DCSR_RCPM_CG1CR0, 0x00000001);
|
|
|
|
fsl_epu_setup((void *)dcsr_epu_base);
|
|
|
|
/* Pull MCKE signal low before enabling deep sleep signal in FPGA */
|
|
out_be32(dcsr_epu_base + EPECR0, 0x5);
|
|
out_be32(dcsr_epu_base + EPSMCR15, 0x76300000);
|
|
}
|
|
|
|
static void __secure ls1_deepsleep_irq_cfg(void)
|
|
{
|
|
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
|
|
u32 ippdexpcr0, ippdexpcr1, pmcintecr = 0;
|
|
|
|
/* Mask interrupts from GIC */
|
|
out_be32(&rcpm->nfiqoutr, 0x0ffffffff);
|
|
out_be32(&rcpm->nirqoutr, 0x0ffffffff);
|
|
/* Mask deep sleep wake-up interrupts while entering deep sleep */
|
|
out_be32(&rcpm->dsimskr, 0x0ffffffff);
|
|
|
|
ippdexpcr0 = in_be32(&rcpm->ippdexpcr0);
|
|
/*
|
|
* Workaround: There is bug of register ippdexpcr1, when read it always
|
|
* returns zero, so its value is saved to a scrachpad register to be
|
|
* read, that is why we don't read it from register ippdexpcr1 itself.
|
|
*/
|
|
ippdexpcr1 = in_le32(&scfg->sparecr[7]);
|
|
out_be32(&rcpm->ippdexpcr1, ippdexpcr1);
|
|
|
|
if (ippdexpcr0 & RCPM_IPPDEXPCR0_ETSEC)
|
|
pmcintecr |= SCFG_PMCINTECR_ETSECRXG0 |
|
|
SCFG_PMCINTECR_ETSECRXG1 |
|
|
SCFG_PMCINTECR_ETSECERRG0 |
|
|
SCFG_PMCINTECR_ETSECERRG1;
|
|
|
|
if (ippdexpcr0 & RCPM_IPPDEXPCR0_GPIO)
|
|
pmcintecr |= SCFG_PMCINTECR_GPIO;
|
|
|
|
if (ippdexpcr1 & RCPM_IPPDEXPCR1_LPUART)
|
|
pmcintecr |= SCFG_PMCINTECR_LPUART;
|
|
|
|
if (ippdexpcr1 & RCPM_IPPDEXPCR1_FLEXTIMER)
|
|
pmcintecr |= SCFG_PMCINTECR_FTM;
|
|
|
|
/* Always set external IRQ pins as wakeup source */
|
|
pmcintecr |= SCFG_PMCINTECR_IRQ0 | SCFG_PMCINTECR_IRQ1;
|
|
|
|
out_be32(&scfg->pmcintlecr, 0);
|
|
/* Clear PMC interrupt status */
|
|
out_be32(&scfg->pmcintsr, 0xffffffff);
|
|
/* Enable wakeup interrupt during deep sleep */
|
|
out_be32(&scfg->pmcintecr, pmcintecr);
|
|
}
|
|
|
|
static void __secure ls1_delay(unsigned int loop)
|
|
{
|
|
while (loop--) {
|
|
int i = 1000;
|
|
while (i--)
|
|
;
|
|
}
|
|
}
|
|
|
|
static void __secure ls1_start_fsm(void)
|
|
{
|
|
void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
|
|
void *ccsr_gic_base = (void *)SYS_FSL_GIC_ADDR;
|
|
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
|
|
|
|
/* Set HRSTCR */
|
|
setbits_be32(&scfg->hrstcr, 0x80000000);
|
|
|
|
/* Place DDR controller in self refresh mode */
|
|
setbits_be32(&ddr->sdram_cfg_2, 0x80000000);
|
|
|
|
ls1_delay(2000);
|
|
|
|
/* Set EVT4_B to lock the signal MCKE down */
|
|
out_be32(dcsr_epu_base + EPECR0, 0x0);
|
|
|
|
ls1_delay(2000);
|
|
|
|
out_be32(ccsr_gic_base + CCSR_GICD_CTLR, 0x0);
|
|
out_be32(ccsr_gic_base + CCSR_GICC_CTLR, 0x0);
|
|
|
|
/* Enable all EPU Counters */
|
|
setbits_be32(dcsr_epu_base + EPGCR, 0x80000000);
|
|
|
|
/* Enable SCU15 */
|
|
setbits_be32(dcsr_epu_base + EPECR15, 0x90000004);
|
|
|
|
/* Enter WFI mode, and EPU FSM will start */
|
|
__asm__ __volatile__ ("wfi" : : : "memory");
|
|
|
|
/* NEVER ENTER HERE */
|
|
while (1)
|
|
;
|
|
}
|
|
|
|
static void __secure ls1_deep_sleep(u32 entry_point)
|
|
{
|
|
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
|
|
#ifdef QIXIS_BASE
|
|
u32 tmp;
|
|
void *qixis_base = (void *)QIXIS_BASE;
|
|
#endif
|
|
|
|
/* Enable cluster to enter the PCL10 state */
|
|
out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);
|
|
|
|
/* Save the first 128 bytes of DDR data */
|
|
ls1_save_ddr_head();
|
|
|
|
/* Save the kernel resume entry */
|
|
out_le32(&scfg->sparecr[3], entry_point);
|
|
|
|
/* Request to put cluster 0 in PCL10 state */
|
|
setbits_be32(&rcpm->clpcl10setr, RCPM_CLPCL10SETR_C0);
|
|
|
|
/* Setup the registers of the EPU FSM for deep sleep */
|
|
ls1_fsm_setup();
|
|
|
|
#ifdef QIXIS_BASE
|
|
/* Connect the EVENT button to IRQ in FPGA */
|
|
tmp = in_8(qixis_base + QIXIS_CTL_SYS);
|
|
tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
|
|
tmp |= QIXIS_CTL_SYS_EVTSW_IRQ;
|
|
out_8(qixis_base + QIXIS_CTL_SYS, tmp);
|
|
|
|
/* Enable deep sleep signals in FPGA */
|
|
tmp = in_8(qixis_base + QIXIS_PWR_CTL2);
|
|
tmp |= QIXIS_PWR_CTL2_PCTL;
|
|
out_8(qixis_base + QIXIS_PWR_CTL2, tmp);
|
|
|
|
/* Pull down PCIe RST# */
|
|
tmp = in_8(qixis_base + QIXIS_RST_FORCE_3);
|
|
tmp |= QIXIS_RST_FORCE_3_PCIESLOT1;
|
|
out_8(qixis_base + QIXIS_RST_FORCE_3, tmp);
|
|
#endif
|
|
|
|
/* Enable Warm Device Reset */
|
|
setbits_be32(&scfg->dpslpcr, SCFG_DPSLPCR_WDRR_EN);
|
|
setbits_be32(&gur->crstsr, DCFG_CRSTSR_WDRFR);
|
|
|
|
/* Disable QE */
|
|
setbits_be32(&gur->devdisr, CCSR_DEVDISR1_QE);
|
|
|
|
ls1_deepsleep_irq_cfg();
|
|
|
|
psci_v7_flush_dcache_all();
|
|
|
|
ls1_start_fsm();
|
|
}
|
|
|
|
#else
|
|
static void __secure ls1_sleep(void)
|
|
{
|
|
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
|
|
|
|
#ifdef QIXIS_BASE
|
|
u32 tmp;
|
|
void *qixis_base = (void *)QIXIS_BASE;
|
|
|
|
/* Connect the EVENT button to IRQ in FPGA */
|
|
tmp = in_8(qixis_base + QIXIS_CTL_SYS);
|
|
tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
|
|
tmp |= QIXIS_CTL_SYS_EVTSW_IRQ;
|
|
out_8(qixis_base + QIXIS_CTL_SYS, tmp);
|
|
#endif
|
|
|
|
/* Enable cluster to enter the PCL10 state */
|
|
out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);
|
|
|
|
setbits_be32(&rcpm->powmgtcsr, RCPM_POWMGTCSR_LPM20_REQ);
|
|
|
|
__asm__ __volatile__ ("wfi" : : : "memory");
|
|
}
|
|
#endif
|
|
|
|
void __secure ls1_system_suspend(u32 fn, u32 entry_point, u32 context_id)
|
|
{
|
|
#ifdef CONFIG_LS1_DEEP_SLEEP
|
|
ls1_deep_sleep(entry_point);
|
|
#else
|
|
ls1_sleep();
|
|
#endif
|
|
}
|