mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
6d36e92d28
Add support for Kevin, an RK3399-based convertible chromebook that is
very similar to Bob. This patch is mostly based on existing support for
Bob, with only minor changes for Kevin-specific things.
Unlike other Gru boards, coreboot sets Kevin's center logic to 925 mV,
so adjust it here in the dts as well. The rk3399-gru-kevin devicetree
has an unknown event code reference which has to be defined, set it
to the Linux counterpart. The new defconfig is copied from Bob with the
diffconfig:
DEFAULT_DEVICE_TREE "rk3399-gru-bob" -> "rk3399-gru-kevin"
DEFAULT_FDT_FILE "rockchip/rk3399-gru-bob.dtb" -> "rockchip/rk3399-gru-kevin.dtb"
VIDEO_ROCKCHIP_MAX_XRES 1280 -> 2400
VIDEO_ROCKCHIP_MAX_YRES 800 -> 1600
+TARGET_CHROMEBOOK_KEVIN y
With this Kevin can boot from SPI flash to a usable U-Boot prompt on the
display with the keyboard working, but cannot boot into Linux for
unknown reasons.
eMMC starts in a working state but fails to re-init, microSD card works
but at a lower-than-expected speed, USB works but causes a hang on
de-init. There are known workarounds to solve eMMC and USB issues.
Cc: Marty E. Plummer <hanetzer@startmail.com>
Cc: Simon Glass <sjg@chromium.org>
[Alper: commit message, resync config with Bob, update MAINTAINERS,
add to Rockchip doc, add Kconfig help message, set regulator]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
108 lines
2.4 KiB
C
108 lines
2.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2018 Google
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <init.h>
|
|
#include <syscon.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/grf_rk3399.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/misc.h>
|
|
|
|
#define GRF_IO_VSEL_BT656_SHIFT 0
|
|
#define GRF_IO_VSEL_AUDIO_SHIFT 1
|
|
#define PMUGRF_CON0_VSEL_SHIFT 8
|
|
#define PMUGRF_CON0_VOL_SHIFT 9
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* provided to defeat compiler optimisation in board_init_f() */
|
|
void gru_dummy_function(int i)
|
|
{
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
# if defined(CONFIG_TARGET_CHROMEBOOK_BOB) || defined(CONFIG_TARGET_CHROMEBOOK_KEVIN)
|
|
int sum, i;
|
|
|
|
/*
|
|
* Add a delay and ensure that the compiler does not optimise this out.
|
|
* This is needed since the power rails tail a while to turn on, and
|
|
* we get garbage serial output otherwise.
|
|
*/
|
|
sum = 0;
|
|
for (i = 0; i < 150000; i++)
|
|
sum += i;
|
|
gru_dummy_function(sum);
|
|
#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
int board_early_init_r(void)
|
|
{
|
|
struct udevice *clk;
|
|
int ret;
|
|
|
|
/*
|
|
* This init is done in SPL, but when chain-loading U-Boot SPL will
|
|
* have been skipped. Allow the clock driver to check if it needs
|
|
* setting up.
|
|
*/
|
|
ret = uclass_get_device_by_driver(UCLASS_CLK,
|
|
DM_DRIVER_GET(clk_rk3399), &clk);
|
|
if (ret) {
|
|
debug("%s: CLK init failed: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void setup_iodomain(void)
|
|
{
|
|
struct rk3399_grf_regs *grf =
|
|
syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
struct rk3399_pmugrf_regs *pmugrf =
|
|
syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
|
|
|
|
/* BT656 and audio is in 1.8v domain */
|
|
rk_setreg(&grf->io_vsel, (1 << GRF_IO_VSEL_BT656_SHIFT |
|
|
1 << GRF_IO_VSEL_AUDIO_SHIFT));
|
|
|
|
/*
|
|
* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL
|
|
* and explicitly configure that PMU1830_VOL to be 1.8V
|
|
*/
|
|
rk_setreg(&pmugrf->soc_con0, (1 << PMUGRF_CON0_VSEL_SHIFT |
|
|
1 << PMUGRF_CON0_VOL_SHIFT));
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
const u32 cpuid_offset = 0x7;
|
|
const u32 cpuid_length = 0x10;
|
|
u8 cpuid[cpuid_length];
|
|
int ret;
|
|
|
|
setup_iodomain();
|
|
|
|
ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rockchip_cpuid_set(cpuid, cpuid_length);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rockchip_setup_macaddr();
|
|
|
|
return ret;
|
|
}
|