mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
216 lines
6.3 KiB
C
216 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2001 Navin Boppuri / Prashant Patel
|
|
* <nboppuri@trinetcommunication.com>,
|
|
* <pmpatel@trinetcommunication.com>
|
|
* Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
|
|
* Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
|
|
*/
|
|
|
|
/*
|
|
* MPC8xx CPM SPI interface.
|
|
*
|
|
* Parts of this code are probably not portable and/or specific to
|
|
* the board which I used for the tests. Please send fixes/complaints
|
|
* to wd@denx.de
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <mpc8xx.h>
|
|
#include <spi.h>
|
|
|
|
#include <asm/cpm_8xx.h>
|
|
#include <asm/io.h>
|
|
|
|
#define CPM_SPI_BASE_RX CPM_SPI_BASE
|
|
#define CPM_SPI_BASE_TX (CPM_SPI_BASE + sizeof(cbd_t))
|
|
|
|
#define MAX_BUFFER 0x104
|
|
|
|
static int mpc8xx_spi_probe(struct udevice *dev)
|
|
{
|
|
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
cpm8xx_t __iomem *cp = &immr->im_cpm;
|
|
spi_t __iomem *spi = (spi_t __iomem *)&cp->cp_dparam[PROFF_SPI];
|
|
cbd_t __iomem *tbdf, *rbdf;
|
|
|
|
/* Disable relocation */
|
|
out_be16(&spi->spi_rpbase, 0);
|
|
|
|
/* 1 */
|
|
/* ------------------------------------------------
|
|
* Initialize Port B SPI pins -> page 34-8 MPC860UM
|
|
* (we are only in Master Mode !)
|
|
* ------------------------------------------------ */
|
|
|
|
/* --------------------------------------------
|
|
* GPIO or per. Function
|
|
* PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
|
|
* PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
|
|
* PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
|
|
* PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
|
|
* -------------------------------------------- */
|
|
clrsetbits_be32(&cp->cp_pbpar, 0x00000001, 0x0000000E); /* set bits */
|
|
|
|
/* ----------------------------------------------
|
|
* In/Out or per. Function 0/1
|
|
* PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
|
|
* PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
|
|
* PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
|
|
* PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
|
|
* ---------------------------------------------- */
|
|
setbits_be32(&cp->cp_pbdir, 0x0000000F);
|
|
|
|
/* ----------------------------------------------
|
|
* open drain or active output
|
|
* PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
|
|
* PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
|
|
* PBODR[30] = 0 [0x00000002] -> active output: SPICLK
|
|
* PBODR[31] = 0 [0x00000001] -> active output GPIO OUT: CS for PCUE/CCM
|
|
* ---------------------------------------------- */
|
|
|
|
clrsetbits_be16(&cp->cp_pbodr, 0x00000007, 0x00000008);
|
|
|
|
/* Initialize the parameter ram.
|
|
* We need to make sure many things are initialized to zero
|
|
*/
|
|
out_be32(&spi->spi_rstate, 0);
|
|
out_be32(&spi->spi_rdp, 0);
|
|
out_be16(&spi->spi_rbptr, 0);
|
|
out_be16(&spi->spi_rbc, 0);
|
|
out_be32(&spi->spi_rxtmp, 0);
|
|
out_be32(&spi->spi_tstate, 0);
|
|
out_be32(&spi->spi_tdp, 0);
|
|
out_be16(&spi->spi_tbptr, 0);
|
|
out_be16(&spi->spi_tbc, 0);
|
|
out_be32(&spi->spi_txtmp, 0);
|
|
|
|
/* 3 */
|
|
/* Set up the SPI parameters in the parameter ram */
|
|
out_be16(&spi->spi_rbase, CPM_SPI_BASE_RX);
|
|
out_be16(&spi->spi_tbase, CPM_SPI_BASE_TX);
|
|
|
|
/***********IMPORTANT******************/
|
|
|
|
/*
|
|
* Setting transmit and receive buffer descriptor pointers
|
|
* initially to rbase and tbase. Only the microcode patches
|
|
* documentation talks about initializing this pointer. This
|
|
* is missing from the sample I2C driver. If you dont
|
|
* initialize these pointers, the kernel hangs.
|
|
*/
|
|
out_be16(&spi->spi_rbptr, CPM_SPI_BASE_RX);
|
|
out_be16(&spi->spi_tbptr, CPM_SPI_BASE_TX);
|
|
|
|
/* 4 */
|
|
/* Init SPI Tx + Rx Parameters */
|
|
while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG)
|
|
;
|
|
|
|
out_be16(&cp->cp_cpcr, mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) |
|
|
CPM_CR_FLG);
|
|
while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG)
|
|
;
|
|
|
|
/* 5 */
|
|
/* Set SDMA configuration register */
|
|
out_be32(&immr->im_siu_conf.sc_sdcr, 0x0001);
|
|
|
|
/* 6 */
|
|
/* Set to big endian. */
|
|
out_8(&spi->spi_tfcr, SMC_EB);
|
|
out_8(&spi->spi_rfcr, SMC_EB);
|
|
|
|
/* 7 */
|
|
/* Set maximum receive size. */
|
|
out_be16(&spi->spi_mrblr, MAX_BUFFER);
|
|
|
|
/* 8 + 9 */
|
|
/* tx and rx buffer descriptors */
|
|
tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX];
|
|
rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX];
|
|
|
|
clrbits_be16(&tbdf->cbd_sc, BD_SC_READY);
|
|
clrbits_be16(&rbdf->cbd_sc, BD_SC_EMPTY);
|
|
|
|
/* 10 + 11 */
|
|
out_8(&cp->cp_spim, 0); /* Mask all SPI events */
|
|
out_8(&cp->cp_spie, SPI_EMASK); /* Clear all SPI events */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpc8xx_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
cpm8xx_t __iomem *cp = &immr->im_cpm;
|
|
cbd_t __iomem *tbdf, *rbdf;
|
|
int tm;
|
|
size_t count = (bitlen + 7) / 8;
|
|
|
|
if (count > MAX_BUFFER)
|
|
return -EINVAL;
|
|
|
|
tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX];
|
|
rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX];
|
|
|
|
/* Set CS for device */
|
|
clrbits_be32(&cp->cp_pbdat, 0x0001);
|
|
|
|
/* Setting tx bd status and data length */
|
|
out_be32(&tbdf->cbd_bufaddr, (ulong)dout);
|
|
out_be16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_LAST | BD_SC_WRAP);
|
|
out_be16(&tbdf->cbd_datlen, count);
|
|
|
|
/* Setting rx bd status and data length */
|
|
out_be32(&rbdf->cbd_bufaddr, (ulong)din);
|
|
out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_WRAP);
|
|
out_be16(&rbdf->cbd_datlen, 0); /* rx length has no significance */
|
|
|
|
clrsetbits_be16(&cp->cp_spmode, ~SPMODE_LOOP, SPMODE_REV | SPMODE_MSTR |
|
|
SPMODE_EN | SPMODE_LEN(8) | SPMODE_PM(0x8));
|
|
out_8(&cp->cp_spim, 0); /* Mask all SPI events */
|
|
out_8(&cp->cp_spie, SPI_EMASK); /* Clear all SPI events */
|
|
|
|
/* start spi transfer */
|
|
setbits_8(&cp->cp_spcom, SPI_STR); /* Start transmit */
|
|
|
|
/* --------------------------------
|
|
* Wait for SPI transmit to get out
|
|
* or time out (1 second = 1000 ms)
|
|
* -------------------------------- */
|
|
for (tm = 0; tm < 1000; ++tm) {
|
|
if (in_8(&cp->cp_spie) & SPI_TXB) /* Tx Buffer Empty */
|
|
break;
|
|
if ((in_be16(&tbdf->cbd_sc) & BD_SC_READY) == 0)
|
|
break;
|
|
udelay(1000);
|
|
}
|
|
if (tm >= 1000)
|
|
printf("*** spi_xfer: Time out while xferring to/from SPI!\n");
|
|
|
|
/* Clear CS for device */
|
|
setbits_be32(&cp->cp_pbdat, 0x0001);
|
|
|
|
return count;
|
|
}
|
|
|
|
static const struct dm_spi_ops mpc8xx_spi_ops = {
|
|
.xfer = mpc8xx_spi_xfer,
|
|
};
|
|
|
|
static const struct udevice_id mpc8xx_spi_ids[] = {
|
|
{ .compatible = "fsl,mpc8xx-spi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mpc8xx_spi) = {
|
|
.name = "mpc8xx_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = mpc8xx_spi_ids,
|
|
.ops = &mpc8xx_spi_ops,
|
|
.probe = mpc8xx_spi_probe,
|
|
};
|