mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 12:33:41 +00:00
f5db5979df
When the pin control driver selects SD/eMMC function for a pin group, there is additional configuration to be done for this case - switch the PHY to work with SDHCI interface. This patch adds the missing functionality into the pin control driver. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Evan Wang <xswang@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
233 lines
6.4 KiB
C
233 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2016 Marvell International Ltd.
|
|
* https://spdx.org/licenses
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <fdtdec.h>
|
|
#include <errno.h>
|
|
#include <dm.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <dm/root.h>
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-armada8k/soc-info.h>
|
|
#include "pinctrl-mvebu.h"
|
|
|
|
#define AP_EMMC_PHY_CTRL_REG 0x100
|
|
#define CP_EMMC_PHY_CTRL_REG 0x424
|
|
#define EMMC_PHY_CTRL_SDPHY_EN BIT(0)
|
|
|
|
#define AP806_EMMC_CLK_PIN_ID 0
|
|
#define AP806_EMMC_CLK_FUNC 0x1
|
|
#define CP110_EMMC_CLK_PIN_ID 56
|
|
#define CP110_EMMC_CLK_FUNC 0xe
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* mvebu_pinctl_emmc_set_mux: configure sd/mmc PHY mux
|
|
* To enable SDIO/eMMC in Armada-APN806/CP110, need to configure PHY mux.
|
|
* eMMC/SD PHY register responsible for muxing between MPPs and SD/eMMC
|
|
* controller:
|
|
* - Bit0 enabled SDIO/eMMC PHY is used as a MPP muxltiplexer,
|
|
* - Bit0 disabled SDIO/eMMC PHY is connected to SDIO/eMMC controller
|
|
* If pin function is set to eMMC/SD, then configure the eMMC/SD PHY
|
|
* muxltiplexer register to be on SDIO/eMMC controller
|
|
*/
|
|
void mvebu_pinctl_emmc_set_mux(struct udevice *dev, u32 pin, u32 func)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
struct mvebu_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
if (!fdt_node_check_compatible(blob, node, "marvell,ap806-pinctrl")) {
|
|
if ((pin == AP806_EMMC_CLK_PIN_ID) &&
|
|
(func == AP806_EMMC_CLK_FUNC)) {
|
|
clrbits_le32(priv->base_reg + AP_EMMC_PHY_CTRL_REG,
|
|
EMMC_PHY_CTRL_SDPHY_EN);
|
|
}
|
|
} else if (!fdt_node_check_compatible(blob, node,
|
|
"marvell,armada-8k-cpm-pinctrl")) {
|
|
if ((pin == CP110_EMMC_CLK_PIN_ID) &&
|
|
(func == CP110_EMMC_CLK_FUNC)) {
|
|
clrbits_le32(priv->base_reg + CP_EMMC_PHY_CTRL_REG,
|
|
EMMC_PHY_CTRL_SDPHY_EN);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mvebu_pinctrl_set_state: configure pin functions.
|
|
* @dev: the pinctrl device to be configured.
|
|
* @config: the state to be configured.
|
|
* @return: 0 in success
|
|
*/
|
|
int mvebu_pinctrl_set_state(struct udevice *dev, struct udevice *config)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(config);
|
|
struct mvebu_pinctrl_priv *priv;
|
|
u32 pin_arr[MVEBU_MAX_PINS_PER_BANK];
|
|
u32 function;
|
|
int i, pin_count;
|
|
|
|
priv = dev_get_priv(dev);
|
|
|
|
pin_count = fdtdec_get_int_array_count(blob, node,
|
|
"marvell,pins",
|
|
pin_arr,
|
|
MVEBU_MAX_PINS_PER_BANK);
|
|
if (pin_count <= 0) {
|
|
debug("Failed reading pins array for pinconfig %s (%d)\n",
|
|
config->name, pin_count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
function = fdtdec_get_int(blob, node, "marvell,function", 0xff);
|
|
|
|
/*
|
|
* Check if setup of PHY mux is needed for this pins group.
|
|
* Only the first pin id in array is tested, all the rest use the same
|
|
* pin function.
|
|
*/
|
|
mvebu_pinctl_emmc_set_mux(dev, pin_arr[0], function);
|
|
|
|
for (i = 0; i < pin_count; i++) {
|
|
int reg_offset;
|
|
int field_offset;
|
|
int pin = pin_arr[i];
|
|
|
|
if (function > priv->max_func) {
|
|
debug("Illegal function %d for pinconfig %s\n",
|
|
function, config->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Calculate register address and bit in register */
|
|
reg_offset = priv->reg_direction * 4 *
|
|
(pin >> (PIN_REG_SHIFT));
|
|
field_offset = (BITS_PER_PIN) * (pin & PIN_FIELD_MASK);
|
|
|
|
clrsetbits_le32(priv->base_reg + reg_offset,
|
|
PIN_FUNC_MASK << field_offset,
|
|
(function & PIN_FUNC_MASK) << field_offset);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mvebu_pinctrl_set_state_all: configure the entire bank pin functions.
|
|
* @dev: the pinctrl device to be configured.
|
|
* @config: the state to be configured.
|
|
* @return: 0 in success
|
|
*/
|
|
static int mvebu_pinctrl_set_state_all(struct udevice *dev,
|
|
struct udevice *config)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(config);
|
|
struct mvebu_pinctrl_priv *priv;
|
|
u32 func_arr[MVEBU_MAX_PINS_PER_BANK];
|
|
int pin, err;
|
|
|
|
priv = dev_get_priv(dev);
|
|
|
|
err = fdtdec_get_int_array(blob, node, "pin-func",
|
|
func_arr, priv->pin_cnt);
|
|
if (err) {
|
|
debug("Failed reading pin functions for bank %s\n",
|
|
priv->bank_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check if setup of PHY mux is needed for this pins group. */
|
|
if (priv->pin_cnt < CP110_EMMC_CLK_PIN_ID)
|
|
mvebu_pinctl_emmc_set_mux(dev, AP806_EMMC_CLK_PIN_ID,
|
|
func_arr[AP806_EMMC_CLK_PIN_ID]);
|
|
else
|
|
mvebu_pinctl_emmc_set_mux(dev, CP110_EMMC_CLK_PIN_ID,
|
|
func_arr[CP110_EMMC_CLK_PIN_ID]);
|
|
|
|
for (pin = 0; pin < priv->pin_cnt; pin++) {
|
|
int reg_offset;
|
|
int field_offset;
|
|
u32 func = func_arr[pin];
|
|
|
|
/* Bypass pins with function 0xFF */
|
|
if (func == 0xff) {
|
|
debug("Warning: pin %d value is not modified ", pin);
|
|
debug("(kept as default)\n");
|
|
continue;
|
|
} else if (func > priv->max_func) {
|
|
debug("Illegal function %d for pin %d\n", func, pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Calculate register address and bit in register */
|
|
reg_offset = priv->reg_direction * 4 *
|
|
(pin >> (PIN_REG_SHIFT));
|
|
field_offset = (BITS_PER_PIN) * (pin & PIN_FIELD_MASK);
|
|
|
|
clrsetbits_le32(priv->base_reg + reg_offset,
|
|
PIN_FUNC_MASK << field_offset,
|
|
(func & PIN_FUNC_MASK) << field_offset);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mvebu_pinctl_probe(struct udevice *dev)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
struct mvebu_pinctrl_priv *priv;
|
|
|
|
priv = dev_get_priv(dev);
|
|
if (!priv) {
|
|
debug("%s: Failed to get private\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->base_reg = devfdt_get_addr_ptr(dev);
|
|
if (priv->base_reg == (void *)FDT_ADDR_T_NONE) {
|
|
debug("%s: Failed to get base address\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->pin_cnt = fdtdec_get_int(blob, node, "pin-count",
|
|
MVEBU_MAX_PINS_PER_BANK);
|
|
priv->max_func = fdtdec_get_int(blob, node, "max-func",
|
|
MVEBU_MAX_FUNC);
|
|
priv->bank_name = fdt_getprop(blob, node, "bank-name", NULL);
|
|
|
|
priv->reg_direction = 1;
|
|
if (fdtdec_get_bool(blob, node, "reverse-reg"))
|
|
priv->reg_direction = -1;
|
|
|
|
return mvebu_pinctrl_set_state_all(dev, dev);
|
|
}
|
|
|
|
static struct pinctrl_ops mvebu_pinctrl_ops = {
|
|
.set_state = mvebu_pinctrl_set_state
|
|
};
|
|
|
|
static const struct udevice_id mvebu_pinctrl_ids[] = {
|
|
{ .compatible = "marvell,mvebu-pinctrl" },
|
|
{ .compatible = "marvell,ap806-pinctrl" },
|
|
{ .compatible = "marvell,armada-7k-pinctrl" },
|
|
{ .compatible = "marvell,armada-8k-cpm-pinctrl" },
|
|
{ .compatible = "marvell,armada-8k-cps-pinctrl" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pinctrl_mvebu) = {
|
|
.name = "mvebu_pinctrl",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = mvebu_pinctrl_ids,
|
|
.priv_auto_alloc_size = sizeof(struct mvebu_pinctrl_priv),
|
|
.ops = &mvebu_pinctrl_ops,
|
|
.probe = mvebu_pinctl_probe
|
|
};
|