u-boot/arch/arm/dts/rk3399-puma.dtsi
Kever Yang feb64f9d51 rockchip: dts: fix unnecessary '-cells' warning
Fix warning below:
unnecessary #address-cells/#size-cells without "ranges" or child "reg"
property

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-08-29 20:44:50 +02:00

680 lines
14 KiB
Text

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
*/
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
/ {
model = "Theobroma Systems RK3399-Q7 SoM";
compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399";
config {
u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
u-boot,boot-led = "module_led";
sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
};
chosen {
stdout-path = "serial0:115200n8";
u-boot,spl-boot-order = \
"same-as-spl", &spiflash, &sdhci, &sdmmc;
};
aliases {
spi0 = &spi1;
spi1 = &spi5;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&leds_pins_puma>;
module_led {
label = "module_led";
gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
sd_card_led {
label = "sd_card_led";
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
};
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
dw_hdmi_audio: dw-hdmi-audio {
status = "enabled";
compatible = "rockchip,dw-hdmi-audio";
#sound-dai-cells = <0>;
};
hdmi_codec: hdmi-codec {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "HDMI-CODEC";
simple-audio-card,cpu {
sound-dai = <&i2s2>;
};
simple-audio-card,codec {
sound-dai = <&hdmi>;
};
};
hdmi_sound: hdmi-sound {
status = "disabled";
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "rockchip,hdmi";
simple-audio-card,cpu {
sound-dai = <&i2s2>;
};
simple-audio-card,codec {
sound-dai = <&hdmi>;
};
};
usbhub_enable: usbhub_enable {
compatible = "regulator-fixed";
regulator-name = "usbhub_enable";
enable-active-low;
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
/*
* The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
* eMMC and SPI flash powered-down initially (in fact it keeps the
* reset signal asserted). Even though it is an enable signal, we
* model this as a regulator.
*/
bios_enable: bios_enable {
compatible = "regulator-fixed";
u-boot,dm-pre-reloc;
regulator-name = "bios_enable";
enable-active-high;
gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vccadc_ref: vccadc-ref {
compatible = "regulator-fixed";
regulator-name = "vcc1v8_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc5v0_otg: vcc5v0-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc5v0_otg";
regulator-always-on;
};
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-low;
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc5v0_host";
regulator-always-on;
};
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_phy";
regulator-always-on;
regulator-boot-on;
};
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
regulator-name = "vdd_log";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
/* for rockchip boot on */
rockchip,pwm_id= <2>;
rockchip,pwm_voltage = <1000000>;
};
};
&emmc_phy {
status = "okay";
};
&gmac {
phy-supply = <&vcc_phy>;
phy-mode = "rgmii";
clock_in_out = "input";
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <2 10000 50000>;
assigned-clocks = <&cru SCLK_RMII_SRC>;
assigned-clock-parents = <&clkin_gmac>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
tx_delay = <0x10>;
rx_delay = <0x10>;
status = "okay";
};
&hdmi {
#sound-dai-cells = <0>;
status = "okay";
};
&i2c0 {
status = "okay";
i2c-scl-rising-time-ns = <168>;
i2c-scl-falling-time-ns = <4>;
clock-frequency = <400000>;
vdd_gpu: fan535555@60 {
compatible = "fcs,fan53555";
reg = <0x60>;
vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
vin-supply = <&vcc5v0_sys>;
regulator-compatible = "fan53555-reg";
regulator-name = "vdd_gpu";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1230000>;
regulator-ramp-delay = <1000>;
fcs,suspend-voltage-selector = <1>;
regulator-always-on;
regulator-boot-on;
regulator-initial-state = <3>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio1>;
interrupts = <22 IRQ_TYPE_LEVEL_LOW>; // TODO check interrupt?
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc5v0_sys>;
vcc12-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc1v8_pmu>;
regulators {
vdd_center: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-name = "vdd_center";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_l: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-name = "vdd_cpu_l";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_1v8: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_ldo1: LDO_REG1 {
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_ldo1";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_hdmi: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc1v8_hdmi";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc1v8_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_sd: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc_sd";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcc_ldo5: LDO_REG5 {
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc_ldo5";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ldo6: LDO_REG6 {
regulator-boot-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc_ldo6";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc0v9_hdmi: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vcc0v9_hdmi";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_efuse: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_efuse";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s3: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc3v3_s3";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s0: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc3v3_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&i2c8 {
status = "okay";
clock-frequency = <400000>;
vdd_cpu_b: fan53555@60 {
compatible = "fcs,fan53555";
reg = <0x60>;
vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
vin-supply = <&vcc5v0_sys>;
regulator-compatible = "fan53555-reg";
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1230000>;
regulator-ramp-delay = <1000>;
fcs,suspend-voltage-selector = <1>;
regulator-always-on;
regulator-boot-on;
regulator-initial-state = <3>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2s0 {
status = "okay";
rockchip,i2s-broken-burst-len;
rockchip,playback-channels = <8>;
rockchip,capture-channels = <8>;
#sound-dai-cells = <0>;
};
&i2s2 {
#sound-dai-cells = <0>;
status = "okay";
};
&io_domains {
status = "okay";
bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */
audio-supply = <&vcc_1v8>; /* audio_gpio3d4a_ms */
sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
gpio1830-supply = <&vcc_1v8>; /* gpio1833_gpio4cd_ms */
};
&pcie0 {
assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
assigned-clock-rates = <100000000>;
ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn>;
status = "okay";
};
&pcie_phy {
status = "okay";
};
&pmu_io_domains {
status = "okay";
pmu1830-supply = <&vcc_1v8>;
};
&pwm0 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&sdhci {
bus-width = <8>;
mmc-hs400-1_8v;
supports-emmc;
non-removable;
keep-power-in-suspend;
mmc-hs400-enhanced-strobe;
status = "okay";
};
&sdmmc {
u-boot,dm-pre-reloc;
clock-frequency = <150000000>;
clock-freq-min-max = <100000 150000000>;
supports-sd;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
num-slots = <1>;
vqmmc-supply = <&vcc_sd>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
status = "okay";
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "disabled";
};
&usb_host0_ohci {
status = "disabled";
};
&dwc3_typec0 {
status = "okay";
};
&usb_host1_ehci {
status = "disabled";
};
&usb_host1_ohci {
status = "disabled";
};
&dwc3_typec1 {
status = "okay";
tsd,usb-port-power = "usbhub_enable";
};
&vopb {
status = "okay";
};
&gpio1 {
u-boot,dm-pre-reloc;
};
&gpio3 {
u-boot,dm-pre-reloc;
};
&pinctrl {
/* Pins that are not explicitely used by any devices */
pinctrl-names = "default";
pinctrl-0 = <&puma_pin_hog>;
hog {
puma_pin_hog: puma_pin_hog {
rockchip,pins =
/* We need pull-ups on Q7 buttons */
<RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */
<RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */
<RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */
<RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
<RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds_pins_puma: led_pins@0 {
rockchip,pins =
<RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
<RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
usb2 {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins =
<RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
host_vbus_drv: host-vbus-drv {
rockchip,pins =
<RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
i2c8 {
i2c8_xfer_a: i2c8-xfer {
rockchip,pins =
<RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>;
};
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
};
&i2c2 {
status = "okay";
clock-frequency = <400000>;
};
&i2c4 {
status = "okay";
clock-frequency = <400000>;
};
&i2c6 {
status = "okay";
clock-frequency = <400000>;
};
&i2c6_xfer {
/* Enable pull-ups, the pins would float otherwise. */
rockchip,pins =
<RK_GPIO2 RK_PB2 RK_FUNC_2 &pcfg_pull_up>,
<RK_GPIO2 RK_PB1 RK_FUNC_2 &pcfg_pull_up>;
};
&i2c7 {
status = "okay";
clock-frequency = <400000>;
rtc_twi: rtc@6f {
compatible = "isil,isl1208";
reg = <0x6f>;
};
fan: fan@18 {
compatible = "ti,amc6821";
reg = <0x18>;
cooling-min-state = <0>;
cooling-max-state = <9>;
#cooling-cells = <2>;
};
};
&uart0 {
u-boot,dm-pre-reloc;
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts>;
status = "okay";
};
&spi1 {
u-boot,dm-pre-reloc;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
spiflash: w25q32dw@0 {
u-boot,dm-pre-reloc;
compatible = "spi-flash";
reg = <0>;
spi-max-frequency = <49500000>;
spi-cpol;
spi-cpha;
};
};
&spi5 {
status = "okay";
};