mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 08:13:17 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
266 lines
9.4 KiB
C
266 lines
9.4 KiB
C
/*
|
|
* Faraday FTIDE020_s ATA Controller (AHB)
|
|
*
|
|
* (C) Copyright 2011 Andes Technology
|
|
* Greentime Hu <greentime@andestech.com>
|
|
* Macpaul Lin <macpaul@andestech.com>
|
|
* Kuo-Wei Chou <kwchou@andestech.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __FTIDE020_H
|
|
#define __FTIDE020_H
|
|
|
|
/* ftide020.h - ide support functions for the FTIDE020_S controller */
|
|
|
|
/* ATA controller register offset */
|
|
struct ftide020_s {
|
|
unsigned int rw_fifo; /* 0x00 - READ/WRITE FIFO */
|
|
unsigned int cmd_fifo; /* 0x04 - R: Status Reg, W: CMD_FIFO */
|
|
unsigned int cr; /* 0x08 - Control Reg */
|
|
unsigned int dmatirr; /* 0x0c - DMA Threshold/Interrupt Reg */
|
|
unsigned int ctrd0; /* 0x10 - Command Timing Reg Device 0 */
|
|
unsigned int dtrd0; /* 0x14 - Data Timing Reg Device 0 */
|
|
unsigned int ctrd1; /* 0x18 - Command Timing Reg Device 1 */
|
|
unsigned int dtrd1; /* 0x1c - Data Timing Reg Device 1 */
|
|
unsigned int ahbtr; /* 0x20 - AHB Timeout Reg */
|
|
unsigned int RESVD0; /* 0x24 */
|
|
unsigned int RESVD1; /* 0x28 */
|
|
unsigned int RESVD2; /* 0x2c */
|
|
unsigned int f_cfifo; /* 0x30 - Feature Info of CMD_FIFO */
|
|
unsigned int f_wfifo; /* 0x34 - Feature Info of WRITE_FIFO */
|
|
unsigned int f_rfifo; /* 0x3c - Feature Info of READ_FIFO */
|
|
unsigned int revision; /* 0x38 - Revision No. of FTIDE020_S */
|
|
};
|
|
|
|
/* reference parameters */
|
|
#define CONFIG_IDE_REG_CS 0x2 /* ref: ATA spec chaper 10, table 42 */
|
|
#define CONFIG_CTRD1_PROBE_T1 0x2
|
|
#define CONFIG_CTRD1_PROBE_T2 0x5
|
|
|
|
/* status register - 0x04 */
|
|
#define STATUS_CSEL (1 << 0) /* CSEL */
|
|
#define STATUS_CS(x) (((x) >> 1) & 0x3) /* CS#[1:0] */
|
|
#define STATUS_DMACK (1 << 3) /* DMACK# */
|
|
#define STATUS_DMARQ (1 << 4) /* DMA req */
|
|
#define STATUS_INTRQ (1 << 5) /* INT req */
|
|
#define STATUS_DIOR (1 << 6) /* DIOR */
|
|
#define STATUS_IORDY (1 << 7) /* I/O ready */
|
|
#define STATUS_DIOW (1 << 8) /* DIOW# */
|
|
#define STATUS_PDIAG (1 << 9) /* PDIAG */
|
|
#define STATUS_DASP (1 << 10) /* DASP# */
|
|
#define STATUS_DEV (1 << 11) /* selected device */
|
|
#define STATUS_PIO (1 << 12) /* PIO in progress */
|
|
#define STATUS_DMA (1 << 13) /* DMA in progress */
|
|
#define STATUS_WFE (1 << 14) /* write fifo full */
|
|
#define STATUS_RFE (1 << 15) /* read fifo empty */
|
|
#define STATUS_COUNTER(x) (((x) >> 16) & 0x3fff) /* data tx counter */
|
|
#define STATUS_ERR (1 << 30) /* trasfer terminated */
|
|
#define STATUS_AER (1 << 31) /* AHB timeout indicate */
|
|
|
|
/* Control register - 0x08 */
|
|
#define CONTROL_TYPE_PIO 0x0
|
|
#define CONTROL_TYPE_UDMA 0x1
|
|
|
|
/* Device 0 */
|
|
#define CONTROL_TYP0(x) (((x) & 0x7) << 0)
|
|
#define CONTROL_IRE0 (1 << 3) /* enable IORDY for PIO */
|
|
#define CONTROL_RESVD_DW0 (1 << 4) /* Reserved - DW0 ? */
|
|
#define CONTROL_E0 (1 << 5) /* E0: 1: Big Endian */
|
|
#define CONTROL_RESVD_WP0 (1 << 6) /* Reserved - WP0 ? */
|
|
#define CONTROL_RESVD_SE0 (1 << 7) /* Reserved - SE0 ? */
|
|
#define CONTROL_RESVD_ECC0 (1 << 8) /* Reserved - ECC0 ? */
|
|
|
|
#define CONTROL_RAEIE (1 << 9) /* IRQ - read fifo almost full */
|
|
#define CONTROL_RNEIE (1 << 10) /* IRQ - read fifo not empty */
|
|
#define CONTROL_WAFIE (1 << 11) /* IRQ - write fifo almost empty */
|
|
#define CONTROL_WNFIE (1 << 12) /* IRQ - write fifo not full */
|
|
#define CONTROL_RESVD_FIRQ (1 << 13) /* RESERVED - FIRQ ? */
|
|
#define CONTROL_AERIE (1 << 14) /* IRQ - AHB timeout error */
|
|
#define CONTROL_IIE (1 << 15) /* IDE IRQ enable */
|
|
|
|
/* Device 1 */
|
|
#define CONTROL_TYP1(x) (((x) & 0x7) << 16)
|
|
#define CONTROL_IRE1 (1 << 19) /* enable IORDY for PIO */
|
|
#define CONTROL_RESVD_DW1 (1 << 20) /* Reserved - DW1 ? */
|
|
#define CONTROL_E1 (1 << 21) /* E1: 1: Big Endian */
|
|
#define CONTROL_RESVD_WP1 (1 << 22) /* Reserved - WP1 ? */
|
|
#define CONTROL_RESVD_SE1 (1 << 23) /* Reserved - SE1 ? */
|
|
#define CONTROL_RESVD_ECC1 (1 << 24) /* Reserved - ECC1 ? */
|
|
|
|
#define CONTROL_DRE (1 << 25) /* DMA receive enable */
|
|
#define CONTROL_DTE (1 << 26) /* DMA transmit enable */
|
|
#define CONTRIL_RESVD (1 << 27)
|
|
#define CONTROL_TERIE (1 << 28) /* transfer terminate error IRQ */
|
|
#define CONTROL_T (1 << 29) /* terminate current operation */
|
|
#define CONTROL_SRST (1 << 30) /* IDE soft reset */
|
|
#define CONTROL_RST (1 << 31) /* IDE hardware reset */
|
|
|
|
/* IRQ register - 0x0c */
|
|
#define IRQ_RXTHRESH(x) (((x) & 0x3ff) << 0) /* Read FIFO threshold */
|
|
#define IRQ_RFAEIRQ (1 << 10) /* Read FIFO almost full intr req */
|
|
#define IRQ_RFNEIRQ (1 << 11) /* Read FIFO not empty intr req */
|
|
#define IRQ_WFAFIRQ (1 << 12) /* Write FIFO almost empty int req */
|
|
#define IRQ_WFNFIRQ (1 << 13) /* Write FIFO not full intr req */
|
|
#define IRQ_RESVD_FIRQ (1 << 14) /* Reserved - FIRQ ? */
|
|
#define IRQ_IIRQ (1 << 15) /* IDE device interrupt request */
|
|
#define IRQ_TXTHRESH(x) (((x) & 0x3ff) << 16) /* Write FIFO thershold */
|
|
#define IRQ_TERMERR (1 << 28) /* Transfer termination indication */
|
|
#define IRQ_AHBERR (1 << 29) /* AHB Timeout indication */
|
|
|
|
/* Command Timing Register 0-1: ctrd (0x10, 0x18) */
|
|
#define CT_REG_T1(x) (((x) & 0xff) << 0) /* setup time of addressed */
|
|
#define CT_REG_T2(x) (((x) & 0xff) << 8) /* pluse width of DIOR/DIOW */
|
|
#define CT_REG_T4(x) (((x) & 0xff) << 16) /* data hold time */
|
|
#define CT_REG_TEOC(x) (((x) & 0xff) << 24) /* time to the end of a cycle */
|
|
|
|
/* Data Timing Register 0-1: dtrd (0x14, 0x1c) */
|
|
/*
|
|
* PIO mode:
|
|
* b(0:7) DT_REG_PIO_T1: the setup time of addressed
|
|
* b(8:15) DT_REG_PIO_T2: the pluse width of DIOR/DIOW
|
|
* b(16:23) DT_REG_PIO_T4: data hold time
|
|
* b(24:31) DT_REG_PIO_TEOC: the time to the end of a cycle
|
|
*/
|
|
#define DT_REG_PIO_T1(x) (((x) & 0xff) << 0)
|
|
#define DT_REG_PIO_T2(x) (((x) & 0xff) << 8)
|
|
#define DT_REG_PIO_T4(x) (((x) & 0xff) << 16)
|
|
#define DT_REG_PIO_TEOC(x) (((x) & 0xff) << 24)
|
|
|
|
/*
|
|
* UDMA mode:
|
|
* b(0:3) DT_REG_UDMA_TENV: the envelope time
|
|
* b(4:7) DT_REG_UDMA_TMLI: interlock time
|
|
* b(8:15) DT_REG_UDMA_TCYC: cycle time - data time
|
|
* b(16:19) DT_REG_UDMA_TACK: setup and hold time of DMACK
|
|
* b(23:30) DT_REG_UDMA_TCVS: setup time of CRC
|
|
* b(24:31) DT_REG_UDMA_TRP: time to ready to pause
|
|
*/
|
|
#define DT_REG_UDMA_TENV(x) (((x) & 0xf) << 0)
|
|
#define DT_REG_UDMA_TMLI(x) (((x) & 0xf) << 4)
|
|
#define DT_REG_UDMA_TCYC(x) (((x) & 0xff) << 8)
|
|
#define DT_REG_UDMA_TACK(x) (((x) & 0xf) << 16)
|
|
#define DT_REG_UDMA_TCVS(x) (((x) & 0xf) << 20)
|
|
#define DT_REG_UDMA_TRP(x) (((x) & 0xff) << 24)
|
|
|
|
/* ftide020_s command formats */
|
|
/* read: IDE Register (CF1) */
|
|
#define IDE_REG_OPCODE_READ (1 << 13) /* 0x2000 */
|
|
#define IDE_REG_CS_READ(x) (((x) & 0x3) << 11)
|
|
#define IDE_REG_DA_READ(x) (((x) & 0x7) << 8)
|
|
#define IDE_REG_CMD_READ(x) 0x0 /* fixed value */
|
|
|
|
/* write: IDE Register (CF2) */
|
|
#define IDE_REG_OPCODE_WRITE (0x5 << 13) /* 0xA000 */
|
|
#define IDE_REG_CS_WRITE(x) (((x) & 0x3) << 11)
|
|
#define IDE_REG_DA_WRITE(x) (((x) & 0x7) << 8)
|
|
/* b(0:7) IDE_REG_CMD_WRITE(x): Actual ATA command or data */
|
|
#define IDE_REG_CMD_WRITE(x) (((x) & 0xff) << 0)
|
|
|
|
/* read/write data: PIO/UDMA (CF3) */
|
|
#define IDE_DATA_WRITE (1 << 15) /* read: 0, write: 1 */
|
|
#define IDE_DATA_OPCODE (0x2 << 13) /* device data access opcode */
|
|
/* b(0:12) IDE_DATA_COUNTER(x): Number of transfers minus 1 */
|
|
#define IDE_DATA_COUNTER(x) (((x) & 0x1fff) << 0)
|
|
|
|
/* set device: (CF4) */
|
|
#define IDE_SET_OPCODE (0x2740 << 2) /* [15:2], 0x9d00 */
|
|
/* CF3 counter value: 0: Tx in bytes, 1: in blocks (each block is 8 bytes) */
|
|
#define IDE_SET_CX8(x) (((x) & 0x1) << 1)
|
|
#define IDE_SET_DEV(x) (((x) & 0x1) << 0) /* 0: Master, 1: Slave */
|
|
|
|
/*
|
|
* IDE command bit definition
|
|
* This section is designed for minor hardware revision compatibility.
|
|
*/
|
|
#define READ_REG_CMD IDE_REG_OPCODE_READ /* 0x2000 */
|
|
#define WRITE_REG_CMD IDE_REG_OPCODE_WRITE /* 0xA000 */
|
|
#define READ_DATA_CMD IDE_DATA_OPCODE /* 0x4000 */
|
|
#define WRITE_DATA_CMD (IDE_DATA_OPCODE | IDE_DATA_WRITE) /* 0xC000 */
|
|
#define SET_DEV_CMD IDE_SET_OPCODE /* 0x9D00 */
|
|
|
|
#define TATOL_TIMING 3
|
|
#define CMD_TIMING 0
|
|
#define PIO_TIMING 1
|
|
#define DMA_TIMING 2
|
|
|
|
/* Timing Parameters */
|
|
/* Register Access Timing Parameters */
|
|
#define REG_PARAMETER 4
|
|
#define REG_T0 0
|
|
#define REG_T1 1
|
|
#define REG_T2 2
|
|
#define REG_T4 3
|
|
|
|
#define REG_MODE 5
|
|
#define REG_MODE0 0
|
|
#define REG_MODE1 1
|
|
#define REG_MODE2 2
|
|
#define REG_MODE3 3
|
|
#define REG_MODE4 4
|
|
|
|
/* PIO Access Timing Parameters */
|
|
#define PIO_PARAMETER 4
|
|
#define PIO_T0 0
|
|
#define PIO_T1 1
|
|
#define PIO_T2 2
|
|
#define PIO_T4 3
|
|
|
|
#define PIO_MODE 5
|
|
#define PIO_MODE0 0
|
|
#define PIO_MODE1 1
|
|
#define PIO_MODE2 2
|
|
#define PIO_MODE3 3
|
|
#define PIO_MODE4 4
|
|
|
|
/* UDMA Access Timing Parameters */
|
|
#define UDMA_PARAMETER 6
|
|
#define UDMA_TCYC 0
|
|
#define UDMA_TCVS 1
|
|
#define UDMA_TMLI 2
|
|
#define UDMA_TENV 3
|
|
#define UDMA_TRP 4
|
|
#define UDMA_TACK 5
|
|
|
|
#define UDMA_MODE 7
|
|
#define UDMA_MODE0 0
|
|
#define UDMA_MODE1 1
|
|
#define UDMA_MODE2 2
|
|
#define UDMA_MODE3 3
|
|
#define UDMA_MODE4 4
|
|
#define UDMA_MODE5 5
|
|
#define UDMA_MODE6 6
|
|
|
|
/*
|
|
* RX_THRESH:
|
|
* hardware limitation: max = 8, should support 1,4,8,16,32,64,128,256
|
|
*/
|
|
#define RX_THRESH 8
|
|
#define WRITE_FIFO 32 /* Hardwired value */
|
|
|
|
/* Time Table */
|
|
unsigned int REG_ACCESS_TIMING[REG_PARAMETER][REG_MODE] = {
|
|
{600, 383, 330, 180, 120},
|
|
{70, 50, 30, 30, 25},
|
|
{290, 290, 290, 80, 70},
|
|
{30, 20, 15, 10, 10},
|
|
};
|
|
|
|
unsigned int PIO_ACCESS_TIMING[PIO_PARAMETER][PIO_MODE] = {
|
|
{600, 383, 240, 180, 120},
|
|
{70, 50, 30, 30, 25},
|
|
{165, 125, 100, 80, 70},
|
|
{30, 20, 15, 10, 10},
|
|
};
|
|
|
|
unsigned int UDMA_ACCESS_TIMING[UDMA_PARAMETER][UDMA_MODE] = {
|
|
{1120, 730, 540, 390, 250, 168, 130}, /* 10X */
|
|
{700, 480, 310, 200, 67, 100, 100}, /* 10X */
|
|
{200, 200, 200, 200, 200, 200, 200}, /* 10X */
|
|
{200, 200, 200, 200, 200, 200, 200}, /* 10X */
|
|
{1600, 1250, 1000, 1000, 1000, 850, 850}, /* 10X */
|
|
{200, 200, 200, 200, 200, 200, 200}, /* 10X */
|
|
};
|
|
|
|
#endif /* __FTIDE020_H */
|