mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 16:07:30 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
263 lines
6.1 KiB
C
263 lines
6.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clock_legacy.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/processor.h>
|
|
|
|
#include <asm/immap.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* PLL min/max specifications */
|
|
#define MAX_FVCO 500000 /* KHz */
|
|
#define MAX_FSYS 80000 /* KHz */
|
|
#define MIN_FSYS 58333 /* KHz */
|
|
|
|
#ifdef CONFIG_MCF5301x
|
|
#define FREF 20000 /* KHz */
|
|
#define MAX_MFD 63 /* Multiplier */
|
|
#define MIN_MFD 0 /* Multiplier */
|
|
#define USBDIV 8
|
|
|
|
/* Low Power Divider specifications */
|
|
#define MIN_LPD (0) /* Divider (not encoded) */
|
|
#define MAX_LPD (15) /* Divider (not encoded) */
|
|
#define DEFAULT_LPD (0) /* Divider (not encoded) */
|
|
#endif
|
|
|
|
#ifdef CONFIG_MCF532x
|
|
#define FREF 16000 /* KHz */
|
|
#define MAX_MFD 135 /* Multiplier */
|
|
#define MIN_MFD 88 /* Multiplier */
|
|
|
|
/* Low Power Divider specifications */
|
|
#define MIN_LPD (1 << 0) /* Divider (not encoded) */
|
|
#define MAX_LPD (1 << 15) /* Divider (not encoded) */
|
|
#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */
|
|
#endif
|
|
|
|
#define BUSDIV 6 /* Divider */
|
|
|
|
/* Get the value of the current system clock */
|
|
int get_sys_clock(void)
|
|
{
|
|
ccm_t *ccm = (ccm_t *)(MMAP_CCM);
|
|
pll_t *pll = (pll_t *)(MMAP_PLL);
|
|
int divider;
|
|
|
|
/* Test to see if device is in LIMP mode */
|
|
if (in_be16(&ccm->misccr) & CCM_MISCCR_LIMP) {
|
|
divider = in_be16(&ccm->cdr) & CCM_CDR_LPDIV(0xF);
|
|
#ifdef CONFIG_MCF5301x
|
|
return (FREF / (3 * (1 << divider)));
|
|
#endif
|
|
#ifdef CONFIG_MCF532x
|
|
return (FREF / (2 << divider));
|
|
#endif
|
|
} else {
|
|
#ifdef CONFIG_MCF5301x
|
|
u32 pfdr = (in_be32(&pll->pcr) & 0x3F) + 1;
|
|
u32 refdiv = (1 << ((in_be32(&pll->pcr) & PLL_PCR_REFDIV(7)) >> 8));
|
|
u32 busdiv = ((in_be32(&pll->pdr) & 0x00F0) >> 4) + 1;
|
|
|
|
return (((FREF * pfdr) / refdiv) / busdiv);
|
|
#endif
|
|
#ifdef CONFIG_MCF532x
|
|
return (FREF * in_8(&pll->pfdr)) / (BUSDIV * 4);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initialize the Low Power Divider circuit
|
|
*
|
|
* Parameters:
|
|
* div Desired system frequency divider
|
|
*
|
|
* Return Value:
|
|
* The resulting output system frequency
|
|
*/
|
|
int clock_limp(int div)
|
|
{
|
|
ccm_t *ccm = (ccm_t *)(MMAP_CCM);
|
|
u32 temp;
|
|
|
|
/* Check bounds of divider */
|
|
if (div < MIN_LPD)
|
|
div = MIN_LPD;
|
|
if (div > MAX_LPD)
|
|
div = MAX_LPD;
|
|
|
|
/* Save of the current value of the SSIDIV so we don't overwrite the value */
|
|
temp = (in_be16(&ccm->cdr) & CCM_CDR_SSIDIV(0xFF));
|
|
|
|
/* Apply the divider to the system clock */
|
|
out_be16(&ccm->cdr, CCM_CDR_LPDIV(div) | CCM_CDR_SSIDIV(temp));
|
|
|
|
setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP);
|
|
|
|
return (FREF / (3 * (1 << div)));
|
|
}
|
|
|
|
/* Exit low power LIMP mode */
|
|
int clock_exit_limp(void)
|
|
{
|
|
ccm_t *ccm = (ccm_t *)(MMAP_CCM);
|
|
int fout;
|
|
|
|
/* Exit LIMP mode */
|
|
clrbits_be16(&ccm->misccr, CCM_MISCCR_LIMP);
|
|
|
|
/* Wait for PLL to lock */
|
|
while (!(in_be16(&ccm->misccr) & CCM_MISCCR_PLL_LOCK))
|
|
;
|
|
|
|
fout = get_sys_clock();
|
|
|
|
return fout;
|
|
}
|
|
|
|
/* Initialize the PLL
|
|
*
|
|
* Parameters:
|
|
* fref PLL reference clock frequency in KHz
|
|
* fsys Desired PLL output frequency in KHz
|
|
* flags Operating parameters
|
|
*
|
|
* Return Value:
|
|
* The resulting output system frequency
|
|
*/
|
|
int clock_pll(int fsys, int flags)
|
|
{
|
|
#ifdef CONFIG_MCF532x
|
|
u32 *sdram_workaround = (u32 *)(MMAP_SDRAM + 0x80);
|
|
#endif
|
|
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
|
|
pll_t *pll = (pll_t *)(MMAP_PLL);
|
|
int fref, temp, fout, mfd;
|
|
u32 i;
|
|
|
|
fref = FREF;
|
|
|
|
if (fsys == 0) {
|
|
/* Return current PLL output */
|
|
#ifdef CONFIG_MCF5301x
|
|
u32 busdiv = ((in_be32(&pll->pdr) >> 4) & 0x0F) + 1;
|
|
mfd = (in_be32(&pll->pcr) & 0x3F) + 1;
|
|
|
|
return (fref * mfd) / busdiv;
|
|
#endif
|
|
#ifdef CONFIG_MCF532x
|
|
mfd = in_8(&pll->pfdr);
|
|
|
|
return (fref * mfd / (BUSDIV * 4));
|
|
#endif
|
|
}
|
|
|
|
/* Check bounds of requested system clock */
|
|
if (fsys > MAX_FSYS)
|
|
fsys = MAX_FSYS;
|
|
|
|
if (fsys < MIN_FSYS)
|
|
fsys = MIN_FSYS;
|
|
|
|
/*
|
|
* Multiplying by 100 when calculating the temp value,
|
|
* and then dividing by 100 to calculate the mfd allows
|
|
* for exact values without needing to include floating
|
|
* point libraries.
|
|
*/
|
|
temp = (100 * fsys) / fref;
|
|
#ifdef CONFIG_MCF5301x
|
|
mfd = (BUSDIV * temp) / 100;
|
|
|
|
/* Determine the output frequency for selected values */
|
|
fout = ((fref * mfd) / BUSDIV);
|
|
#endif
|
|
#ifdef CONFIG_MCF532x
|
|
mfd = (4 * BUSDIV * temp) / 100;
|
|
|
|
/* Determine the output frequency for selected values */
|
|
fout = ((fref * mfd) / (BUSDIV * 4));
|
|
#endif
|
|
|
|
/* must not tamper with SDRAMC if running from SDRAM */
|
|
#if !defined(CONFIG_MONITOR_IS_IN_RAM)
|
|
/*
|
|
* Check to see if the SDRAM has already been initialized.
|
|
* If it has then the SDRAM needs to be put into self refresh
|
|
* mode before reprogramming the PLL.
|
|
*/
|
|
if (in_be32(&sdram->ctrl) & SDRAMC_SDCR_REF)
|
|
clrbits_be32(&sdram->ctrl, SDRAMC_SDCR_CKE);
|
|
|
|
/*
|
|
* Initialize the PLL to generate the new system clock frequency.
|
|
* The device must be put into LIMP mode to reprogram the PLL.
|
|
*/
|
|
|
|
/* Enter LIMP mode */
|
|
clock_limp(DEFAULT_LPD);
|
|
|
|
#ifdef CONFIG_MCF5301x
|
|
out_be32(&pll->pdr,
|
|
PLL_PDR_OUTDIV1((BUSDIV / 3) - 1) |
|
|
PLL_PDR_OUTDIV2(BUSDIV - 1) |
|
|
PLL_PDR_OUTDIV3((BUSDIV / 2) - 1) |
|
|
PLL_PDR_OUTDIV4(USBDIV - 1));
|
|
|
|
clrbits_be32(&pll->pcr, ~PLL_PCR_FBDIV_UNMASK);
|
|
setbits_be32(&pll->pcr, PLL_PCR_FBDIV(mfd - 1));
|
|
#endif
|
|
#ifdef CONFIG_MCF532x
|
|
/* Reprogram PLL for desired fsys */
|
|
out_8(&pll->podr,
|
|
PLL_PODR_CPUDIV(BUSDIV / 3) | PLL_PODR_BUSDIV(BUSDIV));
|
|
|
|
out_8(&pll->pfdr, mfd);
|
|
#endif
|
|
|
|
/* Exit LIMP mode */
|
|
clock_exit_limp();
|
|
|
|
/* Return the SDRAM to normal operation if it is in use. */
|
|
if (in_be32(&sdram->ctrl) & SDRAMC_SDCR_REF)
|
|
setbits_be32(&sdram->ctrl, SDRAMC_SDCR_CKE);
|
|
|
|
#ifdef CONFIG_MCF532x
|
|
/*
|
|
* software workaround for SDRAM opeartion after exiting LIMP
|
|
* mode errata
|
|
*/
|
|
out_be32(sdram_workaround, CONFIG_SYS_SDRAM_BASE);
|
|
#endif
|
|
|
|
/* wait for DQS logic to relock */
|
|
for (i = 0; i < 0x200; i++) ;
|
|
#endif /* !defined(CONFIG_MONITOR_IS_IN_RAM) */
|
|
|
|
return fout;
|
|
}
|
|
|
|
/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
|
|
int get_clocks(void)
|
|
{
|
|
gd->bus_clk = clock_pll(CONFIG_SYS_CLK / 1000, 0) * 1000;
|
|
gd->cpu_clk = (gd->bus_clk * 3);
|
|
|
|
#ifdef CONFIG_SYS_I2C_FSL
|
|
gd->arch.i2c1_clk = gd->bus_clk;
|
|
#endif
|
|
|
|
return (0);
|
|
}
|