u-boot/arch/arm/mach-uniphier/init
Masahiro Yamada dacdb24027 ARM: uniphier: do not setup pins for System Bus on NAND boot mode
For LD11 and LD20 SoCs, the System Bus and NAND are multiplexed
in the same I/O pins.  When booting from a NAND device, pin-mux
for the System Bus must not be set-up because they are exclusive
with each other.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10 10:03:23 +09:00
..
init-ld4.c ARM: uniphier: move PLL init code to U-Boot proper where possible 2016-09-19 00:06:44 +09:00
init-ld11.c ARM: uniphier: do not setup pins for System Bus on NAND boot mode 2016-10-10 10:03:23 +09:00
init-ld20.c ARM: uniphier: do not setup pins for System Bus on NAND boot mode 2016-10-10 10:03:23 +09:00
init-pro4.c ARM: uniphier: move PLL init code to U-Boot proper where possible 2016-09-19 00:06:44 +09:00
init-pro5.c ARM: uniphier: rename function names ph1_* to uniphier_* 2016-04-01 00:59:47 +09:00
init-pxs2.c ARM: uniphier: rename function names ph1_* to uniphier_* 2016-04-01 00:59:47 +09:00
init-sld3.c ARM: uniphier: move PLL init code to U-Boot proper where possible 2016-09-19 00:06:44 +09:00
init-sld8.c ARM: uniphier: move PLL init code to U-Boot proper where possible 2016-09-19 00:06:44 +09:00
init.c ARM: uniphier: add PH1-LD11 SoC support 2016-05-26 00:37:13 +09:00
Makefile ARM: uniphier: add PH1-LD11 SoC support 2016-05-26 00:37:13 +09:00