mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
5c1c6b7306
There is an Errata with the built-in I2C controller where various I2C hardware errors cause a complete lockup of the CPU (which eventually results in an watchdog reset). Put the I2C MPP pins into GPIO mode and use the i2c-gpio driver instead. This uses a bit-banged implementation of an I2C controller and avoids triggering the Errata. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
86 lines
2 KiB
Text
86 lines
2 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_CPU_INIT=y
|
|
CONFIG_ARCH_MVEBU=y
|
|
CONFIG_TEXT_BASE=0x200000000
|
|
CONFIG_SYS_MALLOC_LEN=0x900000
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x200FF0000
|
|
CONFIG_TARGET_X240=y
|
|
CONFIG_ENV_SIZE=0x10000
|
|
CONFIG_ENV_OFFSET=0x00f80000
|
|
CONFIG_ENV_SECT_SIZE=0x40000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="ac5-98dx35xx-atl-x240"
|
|
CONFIG_SYS_LOAD_ADDR=0x220000000
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_FIT=y
|
|
CONFIG_BOOTDELAY=3
|
|
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_CMD_MEMTEST=y
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MTD=y
|
|
CONFIG_CMD_PCI=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_REGULATOR=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_CMD_UBI=y
|
|
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
CONFIG_CLK=y
|
|
CONFIG_CLK_MVEBU=y
|
|
CONFIG_GPIO_HOG=y
|
|
CONFIG_DM_PCA953X=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_DM_I2C_GPIO=y
|
|
CONFIG_SYS_I2C_MVTWSI=y
|
|
CONFIG_I2C_MUX=y
|
|
CONFIG_I2C_MUX_PCA954x=y
|
|
CONFIG_LED=y
|
|
CONFIG_LED_GPIO=y
|
|
CONFIG_MISC=y
|
|
# CONFIG_MMC is not set
|
|
CONFIG_MTD=y
|
|
CONFIG_MTD_RAW_NAND=y
|
|
CONFIG_NAND_PXA3XX=y
|
|
CONFIG_SYS_NAND_ONFI_DETECTION=y
|
|
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
|
CONFIG_SPI_FLASH_ATMEL=y
|
|
CONFIG_SPI_FLASH_GIGADEVICE=y
|
|
CONFIG_SPI_FLASH_MACRONIX=y
|
|
CONFIG_SPI_FLASH_SPANSION=y
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
CONFIG_SPI_FLASH_SST=y
|
|
CONFIG_SPI_FLASH_WINBOND=y
|
|
CONFIG_PHY=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_ARMADA_8K=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_DM_RTC=y
|
|
CONFIG_RTC_MAX313XX=y
|
|
CONFIG_DM_SCSI=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_MVEBU_A3700_SPI=y
|
|
CONFIG_DM_THERMAL=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_ASIX88179=y
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
CONFIG_USB_ETHER_RTL8152=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
# CONFIG_FAT_WRITE is not set
|