mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 07:13:03 +00:00
fbe127f7b5
Import updated devicetree files from the Linux v5.12 release. Besides some node and audio port renames this changes the PHY modes to either rgmii-id or rgmii-txid. From the board files the Pinephone sees a lot of updates. This also adds the long missing USB PHY property for controller 0, which allows the U-Boot PHY driver to eventually use port 0 in host mode (pending another U-Boot patch). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
416 lines
7.6 KiB
Text
416 lines
7.6 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
|
|
// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun50i-a64.dtsi"
|
|
#include "sun50i-a64-cpu-opp.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/gpio-keys.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
model = "Pinebook";
|
|
compatible = "pine64,pinebook", "allwinner,sun50i-a64";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
ethernet0 = &rtl8723cs;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 50000 0>;
|
|
brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
|
|
default-brightness-level = <2>;
|
|
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
|
|
power-supply = <®_vbklt>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
|
|
lid_switch {
|
|
label = "Lid Switch";
|
|
gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_LID>;
|
|
linux,can-disable;
|
|
wakeup-source;
|
|
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
|
};
|
|
};
|
|
|
|
panel_edp: panel-edp {
|
|
compatible = "neweast,wjfh116008a";
|
|
backlight = <&backlight>;
|
|
power-supply = <®_dc1sw>;
|
|
|
|
port {
|
|
panel_edp_in: endpoint {
|
|
remote-endpoint = <&anx6345_out_edp>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reg_vbklt: vbklt {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbklt";
|
|
regulator-min-microvolt = <18000000>;
|
|
regulator-max-microvolt = <18000000>;
|
|
gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_vcc5v0: vcc5v0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
wifi_pwrseq: wifi_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
|
};
|
|
|
|
speaker_amp: audio-amplifier {
|
|
compatible = "simple-audio-amplifier";
|
|
VCC-supply = <®_vcc5v0>;
|
|
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
|
|
sound-name-prefix = "Speaker Amp";
|
|
};
|
|
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec_analog {
|
|
cpvdd-supply = <®_eldo1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&dai {
|
|
status = "okay";
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mixer0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
|
disable-wp;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
vmmc-supply = <®_dldo4>;
|
|
vqmmc-supply = <®_eldo1>;
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
status = "okay";
|
|
|
|
rtl8723cs: wifi@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
vqmmc-supply = <®_eldo1>;
|
|
max-frequency = <200000000>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
mmc-hs200-1_8v;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
vcc-pc-supply = <®_eldo1>;
|
|
vcc-pd-supply = <®_dcdc1>;
|
|
vcc-pe-supply = <®_aldo1>;
|
|
vcc-pg-supply = <®_eldo1>;
|
|
};
|
|
|
|
&pwm {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_i2c {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&r_i2c_pl89_pins>;
|
|
status = "okay";
|
|
|
|
anx6345: anx6345@38 {
|
|
compatible = "analogix,anx6345";
|
|
reg = <0x38>;
|
|
reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
|
|
dvdd25-supply = <®_dldo2>;
|
|
dvdd12-supply = <®_fldo1>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
anx6345_in: port@0 {
|
|
reg = <0>;
|
|
anx6345_in_tcon0: endpoint {
|
|
remote-endpoint = <&tcon0_out_anx6345>;
|
|
};
|
|
};
|
|
|
|
anx6345_out: port@1 {
|
|
reg = <1>;
|
|
anx6345_out_edp: endpoint {
|
|
remote-endpoint = <&panel_edp_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&r_pio {
|
|
/*
|
|
* FIXME: We can't add that supply for now since it would
|
|
* create a circular dependency between pinctrl, the regulator
|
|
* and the RSB Bus.
|
|
*
|
|
* vcc-pl-supply = <®_aldo2>;
|
|
*/
|
|
};
|
|
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
axp803: pmic@3a3 {
|
|
compatible = "x-powers,axp803";
|
|
reg = <0x3a3>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
#include "axp803.dtsi"
|
|
|
|
&ac_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&battery_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
®_aldo1 {
|
|
regulator-name = "vcc-pe";
|
|
};
|
|
|
|
®_aldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pl";
|
|
};
|
|
|
|
®_aldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pll-avcc";
|
|
};
|
|
|
|
®_dc1sw {
|
|
regulator-name = "vcc-lcd";
|
|
};
|
|
|
|
®_dcdc1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3";
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-name = "vdd-cpux";
|
|
};
|
|
|
|
/* DCDC3 is polyphased with DCDC2 */
|
|
|
|
®_dcdc5 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
®_dcdc6 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
®_dldo1 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-hdmi";
|
|
};
|
|
|
|
®_dldo2 {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-name = "vcc-edp";
|
|
};
|
|
|
|
®_dldo4 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi";
|
|
};
|
|
|
|
®_eldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "cpvdd";
|
|
};
|
|
|
|
®_fldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-1v2-hsic";
|
|
};
|
|
|
|
®_fldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-cpus";
|
|
};
|
|
|
|
®_rtc_ldo {
|
|
regulator-name = "vcc-rtc";
|
|
};
|
|
|
|
&simplefb_lcd {
|
|
panel-supply = <®_dc1sw>;
|
|
dvdd25-supply = <®_dldo2>;
|
|
dvdd12-supply = <®_fldo1>;
|
|
};
|
|
|
|
&simplefb_hdmi {
|
|
vcc-hdmi-supply = <®_dldo1>;
|
|
};
|
|
|
|
&sound {
|
|
status = "okay";
|
|
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
|
|
simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
|
|
"Microphone", "Internal Microphone Right",
|
|
"Headphone", "Headphone Jack",
|
|
"Speaker", "Internal Speaker";
|
|
simple-audio-card,routing =
|
|
"Left DAC", "DACL",
|
|
"Right DAC", "DACR",
|
|
"Speaker Amp INL", "LINEOUT",
|
|
"Speaker Amp INR", "LINEOUT",
|
|
"Internal Speaker", "Speaker Amp OUTL",
|
|
"Internal Speaker", "Speaker Amp OUTR",
|
|
"Headphone Jack", "HP",
|
|
"ADCL", "Left ADC",
|
|
"ADCR", "Right ADC",
|
|
"Internal Microphone Left", "MBIAS",
|
|
"MIC1", "Internal Microphone Left",
|
|
"Internal Microphone Right", "HBIAS",
|
|
"MIC2", "Internal Microphone Right";
|
|
};
|
|
|
|
&tcon0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_rgb666_pins>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&tcon0_out {
|
|
tcon0_out_anx6345: endpoint {
|
|
remote-endpoint = <&anx6345_in_tcon0>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pb_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usbphy {
|
|
usb0_vbus-supply = <®_vcc5v0>;
|
|
usb1_vbus-supply = <®_vcc5v0>;
|
|
status = "okay";
|
|
};
|