mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
36223f5de8
Due to some hardware guy's awful work, this version is not compatible with v3.6: the logic of BIT(0) of the reset logic is inverted! (and v3.6.10 is horribly wrong in multiple ways), but this is what we have to solve now. The v3.6 expects 0x0000 set to the register for reset de-assertion, while v3.6 does 0x0001. This commit (ab)uses another bug of v3.6.10 to work around the issue. The UniPhier System Bus is a 16-bit bus, which this support card is connected to. A 32-bit write to the bus (writel() function call) is divided into two 16-bit write transactions, with LSB the first. What is amazing for v3.6.10 is that access to address 4N + 2 goes to 4N (Jesus Christ!). For clarification, things are like this: writel(0x00010000, MICRO_SUPPORT_CARD_RESET); is done with two bus transactions as follows [1] write 0x0000 to address MICRO_SUPPORT_CARD [2] write 0x0001 to address MICRO_SUPPORT_CARD + 2 For v3.6, [1] is written to the register and [2] is correctly ignored because there is nothing at the address MICRO_SUPPORT_CARD + 2. This is what we expect. For v3.6.10, [1] is written to the reset register and then [2] is over-written to the same register due to the bus access bug. For the latter, it produces a glitch signal to the BIT[0], so the device state is lost due to the reset pulse. This solution only works for the start-up code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
232 lines
4.4 KiB
C
232 lines
4.4 KiB
C
/*
|
|
* Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/io.h>
|
|
|
|
#include "micro-support-card.h"
|
|
|
|
#define MICRO_SUPPORT_CARD_BASE 0x43f00000
|
|
#define SMC911X_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x00000)
|
|
#define LED_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x90000)
|
|
#define NS16550A_BASE ((MICRO_SUPPORT_CARD_BASE) + 0xb0000)
|
|
#define MICRO_SUPPORT_CARD_RESET ((MICRO_SUPPORT_CARD_BASE) + 0xd0034)
|
|
#define MICRO_SUPPORT_CARD_REVISION ((MICRO_SUPPORT_CARD_BASE) + 0xd00E0)
|
|
|
|
/*
|
|
* 0: reset deassert, 1: reset
|
|
*
|
|
* bit[0]: LAN, I2C, LED
|
|
* bit[1]: UART
|
|
*/
|
|
void support_card_reset_deassert(void)
|
|
{
|
|
writel(0x00010000, MICRO_SUPPORT_CARD_RESET);
|
|
}
|
|
|
|
void support_card_reset(void)
|
|
{
|
|
writel(0x00020003, MICRO_SUPPORT_CARD_RESET);
|
|
}
|
|
|
|
static int support_card_show_revision(void)
|
|
{
|
|
u32 revision;
|
|
|
|
revision = readl(MICRO_SUPPORT_CARD_REVISION);
|
|
printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf);
|
|
return 0;
|
|
}
|
|
|
|
int check_support_card(void)
|
|
{
|
|
printf("SC: Micro Support Card ");
|
|
return support_card_show_revision();
|
|
}
|
|
|
|
void support_card_init(void)
|
|
{
|
|
/*
|
|
* After power on, we need to keep the LAN controller in reset state
|
|
* for a while. (200 usec)
|
|
* Fortunately, enough wait time is already inserted in pll_init()
|
|
* function. So we do not have to wait here.
|
|
*/
|
|
support_card_reset_deassert();
|
|
}
|
|
|
|
#if defined(CONFIG_SMC911X)
|
|
#include <netdev.h>
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
return smc911x_initialize(0, SMC911X_BASE);
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SYS_NO_FLASH)
|
|
|
|
#include <mtd/cfi_flash.h>
|
|
|
|
struct memory_bank {
|
|
phys_addr_t base;
|
|
unsigned long size;
|
|
};
|
|
|
|
static int mem_is_flash(const struct memory_bank *mem)
|
|
{
|
|
const int loop = 128;
|
|
u32 *scratch_addr;
|
|
u32 saved_value;
|
|
int ret = 1;
|
|
int i;
|
|
|
|
/* just in case, use the tail of the memory bank */
|
|
scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
|
|
sizeof(u32) * loop, MAP_NOCACHE);
|
|
|
|
for (i = 0; i < loop; i++, scratch_addr++) {
|
|
saved_value = readl(scratch_addr);
|
|
writel(~saved_value, scratch_addr);
|
|
if (readl(scratch_addr) != saved_value) {
|
|
/* We assume no memory or SRAM here. */
|
|
writel(saved_value, scratch_addr);
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
unmap_physmem(scratch_addr, MAP_NOCACHE);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* {address, size} */
|
|
static const struct memory_bank memory_banks[] = {
|
|
{0x42000000, 0x01f00000},
|
|
};
|
|
|
|
static const struct memory_bank
|
|
*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
|
|
|
|
phys_addr_t cfi_flash_bank_addr(int i)
|
|
{
|
|
return flash_banks_list[i]->base;
|
|
}
|
|
|
|
unsigned long cfi_flash_bank_size(int i)
|
|
{
|
|
return flash_banks_list[i]->size;
|
|
}
|
|
|
|
static void detect_num_flash_banks(void)
|
|
{
|
|
const struct memory_bank *memory_bank, *end;
|
|
|
|
cfi_flash_num_flash_banks = 0;
|
|
|
|
memory_bank = memory_banks;
|
|
end = memory_bank + ARRAY_SIZE(memory_banks);
|
|
|
|
for (; memory_bank < end; memory_bank++) {
|
|
if (cfi_flash_num_flash_banks >=
|
|
CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
|
|
break;
|
|
|
|
if (mem_is_flash(memory_bank)) {
|
|
flash_banks_list[cfi_flash_num_flash_banks] =
|
|
memory_bank;
|
|
|
|
debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
|
|
(unsigned long)memory_bank->base,
|
|
(unsigned long)memory_bank->size);
|
|
cfi_flash_num_flash_banks++;
|
|
}
|
|
}
|
|
|
|
debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
|
|
}
|
|
#else /* CONFIG_SYS_NO_FLASH */
|
|
void detect_num_flash_banks(void)
|
|
{
|
|
};
|
|
#endif /* CONFIG_SYS_NO_FLASH */
|
|
|
|
void support_card_late_init(void)
|
|
{
|
|
detect_num_flash_banks();
|
|
}
|
|
|
|
static const u8 ledval_num[] = {
|
|
0x7e, /* 0 */
|
|
0x0c, /* 1 */
|
|
0xb6, /* 2 */
|
|
0x9e, /* 3 */
|
|
0xcc, /* 4 */
|
|
0xda, /* 5 */
|
|
0xfa, /* 6 */
|
|
0x4e, /* 7 */
|
|
0xfe, /* 8 */
|
|
0xde, /* 9 */
|
|
};
|
|
|
|
static const u8 ledval_alpha[] = {
|
|
0xee, /* A */
|
|
0xf8, /* B */
|
|
0x72, /* C */
|
|
0xbc, /* D */
|
|
0xf2, /* E */
|
|
0xe2, /* F */
|
|
0x7a, /* G */
|
|
0xe8, /* H */
|
|
0x08, /* I */
|
|
0x3c, /* J */
|
|
0xea, /* K */
|
|
0x70, /* L */
|
|
0x6e, /* M */
|
|
0xa8, /* N */
|
|
0xb8, /* O */
|
|
0xe6, /* P */
|
|
0xce, /* Q */
|
|
0xa0, /* R */
|
|
0xc8, /* S */
|
|
0x8c, /* T */
|
|
0x7c, /* U */
|
|
0x54, /* V */
|
|
0xfc, /* W */
|
|
0xec, /* X */
|
|
0xdc, /* Y */
|
|
0xa4, /* Z */
|
|
};
|
|
|
|
static u8 char2ledval(char c)
|
|
{
|
|
if (isdigit(c))
|
|
return ledval_num[c - '0'];
|
|
else if (isalpha(c))
|
|
return ledval_alpha[toupper(c) - 'A'];
|
|
|
|
return 0;
|
|
}
|
|
|
|
void led_puts(const char *s)
|
|
{
|
|
int i;
|
|
u32 val = 0;
|
|
|
|
if (!s)
|
|
return;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
val <<= 8;
|
|
val |= char2ledval(*s);
|
|
if (*s != '\0')
|
|
s++;
|
|
}
|
|
|
|
writel(~val, LED_BASE);
|
|
}
|