u-boot/drivers/pinctrl/nxp/pinctrl-mxs.h
Lukasz Majewski 0f66653310 pinctrl: mxs: Add support for i.MX2[38] mxs pinctrl driver
The code responsible for setting proper values in the MUX registers
(in the mxs_pinctrl_set_state()) has been ported from Linux kernel
- SHA1: 17bb763e7eaf tag v5.1.11 from linux-stable.

As the pinctrl node in the imx28.dtsi file has gpio pins nodes as subnodes,
it was necessary to use 'dm_scan_fdt_dev()' (as a .bind method) to also
make them 'visible' by the DM's "gpio_mxs" driver.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-19 14:57:14 +02:00

61 lines
1.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*/
#ifndef __PINCTRL_MXS_H
#define __PINCTRL_MXS_H
#include <dm/pinctrl.h>
#define SET 0x4
#define CLR 0x8
#define TOG 0xc
#define MXS_PINCTRL_PIN(pin) PINCTRL_PIN(pin, #pin)
#define PINID(bank, pin) ((bank) * 32 + (pin))
/*
* pinmux-id bit field definitions
*
* bank: 15..12 (4)
* pin: 11..4 (8)
* muxsel: 3..0 (4)
*/
#define MUXID_TO_PINID(m) PINID((m) >> 12 & 0xf, (m) >> 4 & 0xff)
#define MUXID_TO_MUXSEL(m) ((m) & 0xf)
#define PINID_TO_BANK(p) ((p) >> 5)
#define PINID_TO_PIN(p) ((p) % 32)
/*
* pin config bit field definitions
*
* pull-up: 6..5 (2)
* voltage: 4..3 (2)
* mA: 2..0 (3)
*
* MSB of each field is presence bit for the config.
*/
#define PULL_PRESENT (1 << 6)
#define PULL_SHIFT 5
#define VOL_PRESENT (1 << 4)
#define VOL_SHIFT 3
#define MA_PRESENT (1 << 2)
#define MA_SHIFT 0
#define CONFIG_TO_PULL(c) ((c) >> PULL_SHIFT & 0x1)
#define CONFIG_TO_VOL(c) ((c) >> VOL_SHIFT & 0x1)
#define CONFIG_TO_MA(c) ((c) >> MA_SHIFT & 0x3)
struct mxs_regs {
u16 muxsel;
u16 drive;
u16 pull;
};
static inline void mxs_pinctrl_rmwl(u32 value, u32 mask, u8 shift,
void __iomem *reg)
{
clrsetbits_le32(reg, mask << shift, value << shift);
}
#endif /* __PINCTRL_MXS_H */